burn process failed

**LT. Columbo** · 13 Oct 2006, 05:49 AM

DMA for your drive has slipped into PIO mode, fix DMA here

FAQ: What's all this about DMA? - Digital Video Forums

http://forum.digital-digest.com/showthread.php?s=&threadid=44808

This forum contains some frequently asked questions/answers and guides

you are burning way to fast (16x) use 4x.

you should also remove incd and roxio with the nero clean tool and the roxio zap-it tool.

**happy1323** · 14 Oct 2006, 05:14 AM

Hi, again and thanks for your reply, I tried what you told me above. deleting incd and the roxio software, and burning at a lower speed, which is 6X for my cd-drive and i also checked that the drives were in DMA mode like that one article said but it still gives me the burn process failed at 6X. Now I was reading some articles about Memorex cds and I tried a Verbatim dvd+r and it burned fine. I would just like to know if its my cd-rom or the memorex cds dvd-R that I am using--which is kinda weird if it is because i was able to burn two of them and then it stopped working. here is the log file again if it helps. thank you:

Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 8:33:42 AM
Nero version: 6.3.1.29 (Nero Express)
Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 1 TA 0 - 6.3.1.29
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 1 TA 0 - 6.3.1.29
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Memorex DVD16+/-DL4RWlD2 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Memorex DVD16+/-DL4RWlD2 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 338MB (347084kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.10.2006
===== Disc-Copy over image - 1st step : Copy to image ...

12:40:52 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

12:40:52 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

12:40:52 PM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

12:40:52 PM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

12:40:52 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

12:40:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2274687 (505:29.12, 4442MB)

12:40:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

12:40:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 2161
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

12:40:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:40:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ]
--------------------------------------------------------------

12:40:52 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2274688 | lead-out | 1 | 0x00 | 0x41

12:40:52 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning

12:40:52 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:52:15 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2274688 (22B580h), lenght 0 blocks

12:52:16 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:52:19 PM #16 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

12:52:55 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

12:52:55 PM #2 Text 0 File Writer.cpp, Line 124
Writer Memorex DVD16+/-DL4RWlD2 running

12:53:02 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 363900928
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=505:29.13 ( 2274688)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\movie\use thisone\TempImage.nrg>

12:53:03 PM #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

12:53:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2274687 (505:29.12, 4442MB)

12:53:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

12:53:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 2161
Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

12:53:34 PM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

12:53:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [Memorex DVD16+/-DL4RWlD2]
--------------------------------------------------------------

12:53:34 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658561024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2274688 | lead-out | 1 | 0x00 | 0x41

12:53:35 PM #11 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 6x (8,310 KB/s)

12:53:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:53:35 PM #13 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 9:25,766 (565766ms) -> OK

12:53:35 PM #14 Text 0 File DVDR.cpp, Line 2259
Recording mode: Sequential Recording Mode

12:53:35 PM #15 Text 0 File Mmc.cpp, Line 20989
Set BUFE: supported -> ON , Generic write control : ON

12:53:35 PM #16 Text 0 File DVDR.cpp, Line 2400
Start write address at LBA 0
DVD high compatibility mode: Yes

12:53:35 PM #17 Text 0 File Cdrdrv.cpp, Line 8219
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:54:25 PM #18 Text 0 File Cdrdrv.cpp, Line 1296
12:54:25.092 - Memorex DVD16+/-DL4RWlD2\H1 T0 : Queue again later

12:59:11 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1444
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03330000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0D 0x88 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:59:11 PM #20 CDR -1135 File Writer.cpp, Line 304
Write error

12:59:11 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:59:12 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

12:59:12 PM #23 Text 0 File DVDR.cpp, Line 2643
EndDAO: Last written address was 886879

12:59:12 PM #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

12:59:12 PM #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

12:59:12 PM #26 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 6x (8,310 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 9/17/2001 2:44:08 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/18/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanx

**LT. Columbo** · 14 Oct 2006, 05:32 AM

looks a lot better other than the failed burn

those verbatims are far superior and a much better disc. if you need to use them up, perhaps you could update nero or use imgburn.

**jamoskeag3** · 14 Oct 2006, 05:48 AM

Hers link to update nero to 6.6.0.18:

Download Nero version 6.6.0.18 Here! - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=62465

Talk about blank DVD media, burning and hardware related problems

Nero 6 versions past 6.6.0.18 wont go auto from shrink to Nero

burn process failed

burn process failed

Comment

Comment

Comment

Comment