Using filters in DVD Rebuilder

[namubi]

I made the screenshots with winDVD7, what else can i use for it?

cut means, make a 25mb short vts titel set right?

Here is the link

http://rapidshare.de/files/12865219/VIDEO_TS.rar.html

[techreactor]

Definitely a lot of noise can be cleaned, so use the Lremovedust(17,1) function.

change repmode= 2 to repmode= 16

and

return LimitChange(rg, input, limit) to return LimitChange(rg, input, limit, LimitU=1)

in the script.

remember you need the removegrain package for this.

Run your tests on a small clip and post your results.

[namubi]

Are these Settings ok ?

LoadPlugin("C:\Programme\AviSynth 2.5\plugins\RemoveGrainSSE2.dll")
LoadPlugin("C:\Programme\AviSynth 2.5\plugins\RepairSSE2.dll")
LoadPlugin("C:\Programme\AviSynth 2.5\plugins\SSE2Tools.dll")
LRemoveDust_YV12(17,1)
function LRemoveDust_YV12(clip input, int clmode, int "limit")
{
limit=default(limit,2)
clmode=default(clmode,17)
repmode = 16
clensed = Clense(input)
rep = Repair(clensed, input, mode=repmode)
rg = RemoveGrain(rep, mode=clmode)
return LimitChange(rg, input, limit, LimitU=1)


After Encoding, the file is not playable says: "Script Error: end of file reached without matching }

[jeo]

namubi,
as imageshack can host 720*576 pictures was needed to cut the blackborders.
the pictures have now 720*440.

frame 591 from video_ts (sample)

source (from .vob)


fluxsmooth(5,7).asharp(1.2,2.3)


fluxsmooth(5,7).fft3dfilter(bt=-1,sharpen=0.7)



fft3dfilter is better(my taste)but very slow.
asharp give good result too and is faster.

regards

[namubi]

Yeah asharp look better as fft, wonder why dvds today have that bad quality even World of wars has the worst dvd quali from original dvd which I saw for years now.

Thanks for your effort, will use the Fluxsmooth asharp combo!

[techreactor]

Are these Settings ok ?

LoadPlugin("C:\Programme\AviSynth 2.5\plugins\RemoveGrainSSE2.dll")
LoadPlugin("C:\Programme\AviSynth 2.5\plugins\RepairSSE2.dll")
LoadPlugin("C:\Programme\AviSynth 2.5\plugins\SSE2Tools.dll")
LRemoveDust_YV12(17,1)
function LRemoveDust_YV12(clip input, int clmode, int "limit")
{
limit=default(limit,2)
clmode=default(clmode,17)
repmode = 16
clensed = Clense(input)
rep = Repair(clensed, input, mode=repmode)
rg = RemoveGrain(rep, mode=clmode)
return LimitChange(rg, input, limit, LimitU=1)
} --->>> you missed this end bracket.(After Encoding, the file is not playable says: "Script Error: end of file reached without matching })

Script seems fine, just save the RED part to a file (using notepad) in the plugins directory and name it as Lremovedust_YV12.avsi.

Also you dont need to give the loadplugin command as long as the .dlls are in the plugins directory.

So finally you should give only one line command i.e. Lremovedust_YV12(17,1)

[BR7]

Can you post your complete script BR7, the sample looks really neat although I think its a bit soft.

Sorry about that tech I havent been checking these threads that good
Here is what I used
fluxsmooth(5,7)
asharp(1,2)

[chris_j11]

Script seems fine, just save the RED part to a file (using notepad) in the plugins directory and name it as Lremovedust_YV12.avsi.

Also you dont need to give the loadplugin command as long as the .dlls are in the plugins directory.

So finally you should give only one line command i.e. Lremovedust_YV12(17,1)

just wondering if i just type Lremovedust_YV12(17,1) in the AVS Filter Editor, how does dvdrb knows where those filters and settings located

can i just follow namubi with the end bracket ofcourse!

does this mean i don't any other filters like FluxSmooth or undot

also what filter will keep the original aspect ratio (using dvdshrink to author, no compression, so i can remove the beginning/ending credits < maximize video qual)

[techreactor]

just wondering if i just type Lremovedust_YV12(17,1) in the AVS Filter Editor, how does dvdrb knows where those filters and settings located

When you save the Lremovedust_YV12.avsi from the abpve posts, save it in the avisynth\plugins folder. Thats how dvdrb knows, since every filter in the plugins folder is loaded in the memory automatically.

can i just follow namubi with the end bracket ofcourse!

Yes, save it in the plugins folder as an .avsi file as I said above.

does this mean i don't any other filters like FluxSmooth or undot

In my opinion you dont, but try it to see if it suits your taste.

also what filter will keep the original aspect ratio (using dvdshrink to author, no compression, so i can remove the beginning/ending credits < maximize video qual)

Untill and unless you give a resize command your AR remains the same as original.

If you want to clip initial and end credits plus extras, use VOBblanker first before you use DVD-RB, see basic guide here, advanced guides here

[techreactor]

Just posted it in one of the other threads and thought that it might be useful here also, so posting the relevant's here:

A way to see and compare your filter results and what you are gaining (or loosing) is to run your filters thru this comparison script and be your eyes be a good judge of it.

LoadPlugin("C:\Program Files\DVD-RB\DGDecode.dll")
source=mpeg2source("C:\TEMP\D2VAVS\V02.D2V",idct=7)
left=source.script1() 
right=source.script2() 
width=left.width()/2 
height=left.height() 
left=crop(left,0,0,width,height).addborders(0,0,2,0,$0000FF).crop(2,0,-0,-0) 
right=crop(right,width,0,width,height).addborders(2,0,0,0,$0000FF).crop(0,0,-2,-0) 
StackHorizontal(left.subtitle("Script1"),right.subtitle("Script2")) 
function script1(clip c) { 
c 
#----- ENTER CODE OF SCRIPT ONE HERE ----- 
#----- END OF CODE OF SCRIPT ONE----- 
} 
function script2(clip c) { 
c 
#----- ENTER CODE OF SCRIPT TWO HERE ----- 
Lremovedust(17,1)
#----- END OF CODE OF SCRIPT TWO----- 
}

Save it as .avs and open with MPC.

This will compare your source with the filtered source and play it.

"Script 1" part will show the original and "Script 2" part the filtered video.(I used Lremovedust())

[BR7]

I was using HC18- I tried this setting for asharp and it worked well
asharp(2.5,4.5,0.25,hqbf=true)





Here are other asharp settings I like
asharp(1,2)
asharp(1,3)
asharp(1,6)
asharp(2,3)
asharp(2,4)
asharp(1.4,4.7,-0.1)

And here are Convolution3d settings I like
light: Convolution3d(0,2,3,2,2,2.8,0)
medium: Convolution3d(0,3,4,3,4,2.8,0)
strong: Convolution3D (1,6,8,6,8,2.8,0)
C3D(method="sharpen",block_size=3,luma_offset=-2,luma_threshold=30,detail_min=1, detail_max=30)

Here are deen settings I like
light cleaning --> deen("a3d",3,4,1,4)
medium cleaning --> deen("a3d",3,6,1,6)
heavy cleaning --> deen("a3d",4,9,1,9)

[futurex]

greetings BR7

how low is your bitrate? are such filters necessary for 3D movies?

[BR7]

to tell you the truth I can't recall how low my bitrate was,I mostly used light for light noise the other settings do well but tend to weakin the color a bit

[BR7]

Another one I like is LimitedSharpenFaster(ss_x=1.1,ss_y=1.1,Smode=3,str ength=50)
Here are my results with high bitrates 4,000/5,000Kbs
The dlls needed are HERE









--------------------------------------------
Results with lowbitrates 3,556/2,845Kbs With HC18 LimitedSharpenFaster(ss_x=1.1,ss_y=1.1,Smode=3,str ength=50)

[tom942]

Hi,

Is it a good idea to combine LRemoveDust with LimitedSharpenFaster?, or is posible to use other function like ModerateSharpen?, if yes, which could be a recommended valor for this function?

Thanks.