First time using DVD Rebuilder

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • triky40
    Junior Member
    Junior Member
    • Feb 2006
    • 20

    First time using DVD Rebuilder

    Folks,

    Please point out what I did wrong....

    1. I ripped a movie "Stone Cold" by using "wizard" with DVD Decrypter - done without problem.
    2. Using DVD Shrinks to shrink the movie - no problem to play it with "media classic player".
    3. Test with DVD Rebuilder (free edition - would like to test drive before ordering a real one) with ripped movie by DVD decrypter.
    a. Following Cynthia's procedure for free edition - no problem to install.
    b. Set up DVD Rebuider per procedure - no problem to follow the instruction.
    c. Using DVD Rebuider per procedure - no error
    d. After successful DVD rebuider, play the movie by using media classic player - problem only see the menu and the sound.

    Thanks in advance

    Tri
  • UncasMS
    Super Moderator
    • Nov 2001
    • 9047

    #2
    maybe there is a specific problem with this very title and the freeware edition

    or maybe mpc cannot correctyl play the content for any reason

    so you could try another title or use a different software player for dvd content on your harddrive - i use powerdvd for this task

    Comment

    • techreactor
      Banned
      • Jul 2005
      • 1309

      #3
      Also you dont need to use Shrink before Rebuilder, better would be to use VOBblanker to remove those extras and then use Rebuilder directly. Use this guide for VOBblanker

      Comment

      • Miss Marple
        Dithering old maid
        • Nov 2005
        • 957

        #4
        After successful DVD rebuider, play the movie by using media classic player - problem only see the menu and the sound.
        Did you select the VIDEO_TS.IFO file when you played the files?

        Comment

        • blutach
          Not a god of digital video
          • Oct 2004
          • 24627

          #5


          jdobbs will tell you - to isolate a problem, do not do any pre-processing before using DVD Rebuilder.

          Quite frankly, after using DVD Shrink, there would be no need for DVD Rebuilder, as the size would fit. Rebuilder would tell you this.

          Regards
          Les

          Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

          Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
          [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

          Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

          Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


          You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

          Explore the sites and the programs - there's a gold mine of information in them

          Don't forget to play the Digital Digest Quiz!!! (Click here)

          Comment

          • triky40
            Junior Member
            Junior Member
            • Feb 2006
            • 20

            #6
            Sorry about not asking the question clearly.
            1. First, I used "wizard +DVD Decrypter" to decrypt the movie in DVD Decrypter folder.
            2. Second, using Shrinks on the files in "DVD Decrypter folder" and save the result in "Shrink folder"- works great - can play with Media player classic. The whole process tooks 4 hours and 30 minutes.
            3. Third, to test DVD RB, using DVD RB free edition on the files in "DVD Decrypter folder" and save the result in "DVD Rebuilder folder". The whole process took little more than 30 minutes ??? kind of abnormal based on what I have been reading from this forum. Play VIDEO_TS.IFO with Media player classic. It does play the menu. When I click on "play movie" in the menu. The menu stays there with the sound of the movie.
            I uninstall DVD RB and re-install it and go through the setting again but it does not make any different.

            My computer is Celeron 466 mhz. I know it is the antique device but it still works for me.

            attached is the RB log

            [07:56:36] One Click encoding activated...
            -----------------
            [07:56:37] Phase I, PREPARATION started.
            - VTS_01: 2,560,059 sectors.
            -- Scanning and writing .D2V file
            -- Processed 177,588 frames.
            -- Building .AVS and .ECL files
            - Reduction Level for DVD-5: 87.7%
            - Overall Bitrate : 4,189Kbs
            - Space for Video : 3,787,652KB
            - HIGH/LOW/AVERAGE Cell Bitrates: 5,001/600/4,189 Kbs
            [08:10:52] Phase I, PREPARATION completed in 14 minutes.
            [08:10:52] Phase II ENCODING started
            - Creating M2V for VTS_01 segment 0
            - Creating M2V for VTS_01 segment 1
            - Creating M2V for VTS_01 segment 2
            - Creating M2V for VTS_01 segment 3
            - Creating M2V for VTS_01 segment 4
            - Creating M2V for VTS_01 segment 5
            - Creating M2V for VTS_01 segment 6
            - Creating M2V for VTS_01 segment 7
            - Creating M2V for VTS_01 segment 8
            - Creating M2V for VTS_01 segment 9
            - Creating M2V for VTS_01 segment 10
            - Creating M2V for VTS_01 segment 11
            - Creating M2V for VTS_01 segment 12
            - Creating M2V for VTS_01 segment 13
            - Creating M2V for VTS_01 segment 14
            - Creating M2V for VTS_01 segment 15
            - Creating M2V for VTS_01 segment 16
            - Creating M2V for VTS_01 segment 17
            - Creating M2V for VTS_01 segment 18
            - Creating M2V for VTS_01 segment 19
            - Creating M2V for VTS_01 segment 20
            - Creating M2V for VTS_01 segment 21
            - Creating M2V for VTS_01 segment 22
            - Creating M2V for VTS_01 segment 23
            - Creating M2V for VTS_01 segment 24
            - Creating M2V for VTS_01 segment 25
            - Creating M2V for VTS_01 segment 26
            - Creating M2V for VTS_01 segment 27
            - Creating M2V for VTS_01 segment 28
            - Creating M2V for VTS_01 segment 29
            [08:14:10] Phase II ENCODING completed in 4 minutes.
            [08:14:10] Phase III, REBUILD started.
            - Copying IFO, BUP, and unaltered files...
            - Processing VTS_01
            - Reading/processing TMAP table...
            - Rebuilding segment 0 VOBID: 1 CELLID: 1
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 1 VOBID: 1 CELLID: 2
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 2 VOBID: 1 CELLID: 3
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 3 VOBID: 1 CELLID: 4
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 4 VOBID: 1 CELLID: 5
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 5 VOBID: 1 CELLID: 6
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 6 VOBID: 1 CELLID: 7
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 7 VOBID: 1 CELLID: 8
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 8 VOBID: 1 CELLID: 9
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 9 VOBID: 1 CELLID: 10
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 10 VOBID: 1 CELLID: 11
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 11 VOBID: 1 CELLID: 12
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 12 VOBID: 1 CELLID: 13
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 13 VOBID: 1 CELLID: 14
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 14 VOBID: 1 CELLID: 15
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 15 VOBID: 1 CELLID: 16
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 16 VOBID: 1 CELLID: 17
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 17 VOBID: 1 CELLID: 18
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 18 VOBID: 1 CELLID: 19
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 19 VOBID: 1 CELLID: 20
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 20 VOBID: 1 CELLID: 21
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 21 VOBID: 1 CELLID: 22
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 22 VOBID: 1 CELLID: 23
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 23 VOBID: 1 CELLID: 24
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 24 VOBID: 1 CELLID: 25
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 25 VOBID: 1 CELLID: 26
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 26 VOBID: 1 CELLID: 27
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 27 VOBID: 1 CELLID: 28
            - Possible dropped frame(s) noted in this segment, continuing...
            - Rebuilding segment 28 VOBID: 1 CELLID: 29
            - Possible dropped frame(s) noted in this segment, continuing...
            - Updating NAVPACKS for VOBID_01
            - Rebuilding segment 29 VOBID: 2 CELLID: 1
            - Possible dropped frame(s) noted in this segment, continuing...
            - Updating NAVPACKS for VOBID_02
            - Updated VTS_C_ADT.
            - Updated VTS_VOBU_ADMAP.
            - Updated IFO: VTS_01_0.IFO
            - Updating TMAP table...
            Correcting VTS Sectors...
            [08:30:13] Phase III, REBUILD completed in 16 minutes.
            Done.
            [08:30:13] PREPARE/ENCODE/REBUILD completed in 34 min.

            Thanks,
            Tri

            Comment

            • triky40
              Junior Member
              Junior Member
              • Feb 2006
              • 20

              #7
              I used the files in "DVD Decrypter" folder for both tests.

              Thanks,
              Tri

              Comment

              • UncasMS
                Super Moderator
                • Nov 2001
                • 9047

                #8
                are you sure you have AVISYNTH installed?

                which encoder was used?

                have you used the INSTALLER version of the freeware version of rebuilder?

                Comment

                • triky40
                  Junior Member
                  Junior Member
                  • Feb 2006
                  • 20

                  #9
                  Yes I used INSTALLER version of the freeware 0.96 which I believe AVISYNTH comes with it.

                  I don't know which encoder I used but based on Cynthia's guide with freeware version is always used HC encoder. Oh, I forgot I used HC encoder 017.

                  Comment

                  • UncasMS
                    Super Moderator
                    • Nov 2001
                    • 9047

                    #10
                    there was definitely no encoding taking place

                    i am not sure whether the encoder will or will not run with your cpu

                    Comment

                    • nwg
                      Left *****
                      • Jun 2003
                      • 5196

                      #11
                      The drop frame is a indication of something wrong with the dgdecode.dll file. I got the same problem when trying to use to a newer version. I went back to the old version and it encoded fine. I forgot what version it is.

                      Comment

                      • blutach
                        Not a god of digital video
                        • Oct 2004
                        • 24627

                        #12
                        It works fine with dgdecode.dll 1.4.5 which is included with the package.

                        Can you post your rebuilder.ini file please?

                        Regards
                        Les

                        Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                        Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                        [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                        Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                        Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                        You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                        Explore the sites and the programs - there's a gold mine of information in them

                        Don't forget to play the Digital Digest Quiz!!! (Click here)

                        Comment

                        • nwg
                          Left *****
                          • Jun 2003
                          • 5196

                          #13
                          I never got it working with v1.4.5.

                          Comment

                          • blutach
                            Not a god of digital video
                            • Oct 2004
                            • 24627

                            #14
                            Gee, that's strange.

                            Regards
                            Les

                            Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                            Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                            [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                            Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                            Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                            You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                            Explore the sites and the programs - there's a gold mine of information in them

                            Don't forget to play the Digital Digest Quiz!!! (Click here)

                            Comment

                            • triky40
                              Junior Member
                              Junior Member
                              • Feb 2006
                              • 20

                              #15
                              This is my Rebuilder.ini

                              [Options]
                              TargetSectors=2260000
                              vts_min_size=25625
                              Mode=5
                              OneClick=1
                              ReduceOpt=0
                              NoWarn=1
                              AdditionalOutput=1
                              LogFile=1
                              QuEncHQ=1
                              EncoderMinimized=1
                              RemoveDTS=1
                              HC_Quality=2
                              HC_Matrix=1
                              SkinVersion=3
                              HalfD1=00
                              Convert_16_9=00
                              DisableInterlace=00
                              [Paths]
                              QuEnc=C:\Program Files\DVD-RB\Encoders\QuEnc\QuEnc.exe
                              ReJig=C:\Program Files\DVD-RB\Encoders\ReJig\ReJig.exe
                              HC=C:\Program Files\DVD-RB\Encoders\HC Encoder\HCbatch.EXE
                              ProCoder=C:\Program Files\DVD-RB\Encoders\EclPro\EclPro.exe
                              DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
                              MPEG2DEC=C:\Program Files\DVD-RB\DGDecode.dll
                              Working=C:\DVD working RB\
                              Output=C:\DVD Rebuilder\
                              Source=C:\DVD DECRYPTER\
                              [Setup]
                              sLanguages=111111111111111111111111111111111111111 11111111111111111111111111111111111111111111111111 11111111111111111111111111111111111111111111111111
                              Languages=0000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000
                              [Audio]
                              Selected=100
                              [Subpictures]
                              Selected=00

                              regards,

                              Comment

                              Working...