DMA problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • avngres220
    Junior Member
    Junior Member
    • Nov 2005
    • 3

    DMA problems

    I used to be able to fly through the DVD Shrink process without any problem but I haven't copied any DVD's for about six months. Today I tried to using the same equipment and settings I've always used but I keep getting an error message when the burning process begins.

    The four IDE "things" (I'm not computer savy) are off in DMA portion of the log so after reading through the other threads dealing with this it's my understanding that this is probably my problem. However, the DMA step by step thread didn't help because when I go into the properties for the IDE ATA/ATAPI controllers I get a different screen than what is posted on the DMA thread. From what I can tell the properties says DMA is enabled but the error log says otherwise. Basically, I need help. Here's the log - let me know what else you need:
    (PS...i also uninstalled the DVDROM and then rebooted. it recognized it and such but when i tried to burn again it came up as DMA off. thanks in advance for whoever attempts to help out)
    __________________________________________________ ___________________

    Nero Serial Removed*
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 3:21:30 PM
    Nero API version: 6.6.0.6
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <LITE-ON SOHW-1633S DVDRW>Version: BS0C - HA 0 TA 2 - 6.6.0.6
    Adapter driver: <NVATABUS>HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-00EVA0 nvatabus Port 0 ID 0 DMA: Off
    DiskPeripheral : QUANTUM FIREBALLP LM30 nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S nvatabus Port 0 ID 2 DMA: Off
    CdRomPeripheral : _NEC DV-5700A nvatabus Port 0 ID 3 DMA: Off
    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    _NEC DV-5700A F: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 507MB (519536kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    28.11.2005
    NeroAPI
    12:59:05 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    12:59:05 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    12:59:05 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    12:59:05 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    12:59:05 PM #5 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1633S running

    12:59:05 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:59:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    12:59:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    12:59:05 PM #9 Text 0 File Burncd.cpp, Line 3155
    Turn on Disc-At-Once, using DVD media

    12:59:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286159 (508:02.09, 4465MB)

    12:59:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 269
    Write in overburning mode: NO

    12:59:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2311
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    12:59:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 431
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:59:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    12:59:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286160 | lead-out | 1 | 0x41 | 0x00

    12:59:06 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    12:59:06 PM #17 Text 0 File Burncd.cpp, Line 4042
    Cache writing successful.

    12:59:06 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    12:59:06 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    12:59:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:59:06 PM #21 Text 0 File DVDR.cpp, Line 2300
    Recording mode: Sequential Recording Mode

    12:59:06 PM #22 Text 0 File Mmc.cpp, Line 21079
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    12:59:06 PM #23 Text 0 File DVDR.cpp, Line 2441
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:59:06 PM #24 Text 0 File Cdrdrv.cpp, Line 8332
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:59:09 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x029F0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    12:59:09 PM #26 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    12:59:09 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:59:09 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    12:59:09 PM #29 Text 0 File DVDR.cpp, Line 2682
    EndDAO: Last written address was -1

    12:59:09 PM #30 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    12:59:09 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    12:59:09 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 4:28:09 PM (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • Chewy
    Super Moderator
    • Nov 2003
    • 18971

    #2
    When did you update you nvidia motherboard chipset drivers? That's what's hosed your dma.

    Mine says nvidia nforce 2 ata controller(v2.5)
    when I right click on it and hit properties
    it brings up a window with primary and seconday
    under secondary are options for bios control, and various dma's

    Have you tried uninstalling nvidia controller and rebooting?

    Comment

    • avngres220
      Junior Member
      Junior Member
      • Nov 2005
      • 3

      #3
      Originally Posted by Chewy
      When did you update you nvidia motherboard chipset drivers? That's what's hosed your dma.

      Mine says nvidia nforce 2 ata controller(v2.5)
      when I right click on it and hit properties
      it brings up a window with primary and seconday
      under secondary are options for bios control, and various dma's

      Have you tried uninstalling nvidia controller and rebooting?
      just uninstalled nvidia controller and rebooted - everything read and reinstalled. still won't burn and still says "DMA off".

      don't remember when i last installed the drivers - it was this past summer sometime. mine says "nvidia nforce2 ata controller (v2.6)"

      when i bring up the properties box i can uncheck "let BIOS select transfer mode" and then choose from a list of DMAs. is that something i should try? it's (my DVDROM) currently on "ultra dma 2 - ultra33".
      Last edited by avngres220; 29 Nov 2005, 08:34 AM.

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        try and roll back the ide driver to windows xp one first

        there are 2 other things to try, under nero preferences, cache, test all drive speeds, let's see how fast your hard drives are, nero may not
        see the dma right

        another thing your burner is old and has older firmware
        yep you bought 16x dvd-r's

        now that I have checked, update your firmware


        or find some old media
        Last edited by Chewy; 29 Nov 2005, 09:17 AM.

        Comment

        • avngres220
          Junior Member
          Junior Member
          • Nov 2005
          • 3

          #5
          awesome - the firmware solved the problem...good to go now! thanks for the help!

          Comment

          • Chewy
            Super Moderator
            • Nov 2003
            • 18971

            #6
            post another log if you will/of a successful burn
            durn nf2 chipsets

            Comment

            • vw56german
              Digital Video Expert
              Digital Video Expert
              • Jun 2005
              • 640

              #7
              Here are 2 more threads you may wish to read one for DMA and one for better success in burning.

              DMA: http://forum.digital-digest.com/show...threadid=44808

              Golden rules: http://forum.digital-digest.com/show...threadid=49635

              I know you have been having successful burns, before the DMA problem, but you may wish to consider getting some better media. CMC is not known for being quality media.

              Comment

              Working...