default audio streams with PGCEDIT {once more}

[wencaS]

In this way it I am doing I. defaultaudio

My page with video instructions for beginners in Czech.

I'm sorry, added would it to the, but thread is under lock and key.


r0lZ pardoning

[2COOL]

The video file was pretty good, even though I didn't understand a word of it. What I would've done in your guide was to work with each button group separately instead of the all option, which is usually set by default if more than one button group is detected.

1. Check Button group 1
2. Write down the X position, Width, Y position, and height values for button A and button B.
3. Switch the values with buttons, in question, accordingly.
4. Repeat step 1 to 3 with next enabled button group.

On some DVDs, 2 buttons will not be the same size so just moving the X and Y position will not fully make it work. Each button may also have a custom bmp to highlight so you have to make sure that they need to be correctly configured.

With that said...thanks for your contribution.

UPDATE: These need to be swapped too, not just the language code. e.g.



And one more thing. The button commands of swapped buttons needed to be changed accordingly if both are holding different commands. In your example, it was not needed as both buttons had LinkTailPGC commands.

[wencaS]

So.
My English isn't good. Perhaps am your reminder twigged well. Further complete: insider are explained here. (groups)

So is good fetch round buttons from new positions. Vision here.

Video exhibits upon yourself freely tie together, what was explained earlier no repeat again for smaller size resulting file.

[2COOL]

Personally, I would pre-process with PgcEdit's "Jump to PGC upon DVD insert" macro. Just trace to your main menu, continue on to audio/subtitle menu, set the streams accordingly, jump back to main menu, and then execute the macro. Basically, your just doing the same actions like you would do when you pop your original DVD into your standalone player and use the remote.

[wencaS]

In your example, it was not needed as both buttons had LinkTailPGC commands.

In my demonstration have buttons order LinkTailPGC and that's just it was need is confuse A and B. Further followed instructions to pick a sound ft:
[61 00 00 00 00 88 00 00] 26 Set gprm(0) =(mov) sprm(8:Highlighted button number)
[76 00 00 00 04 00 00 00] 27 Set gprm(0) /=(div) 1024
[41 00 00 80 00 00 00 00] 28 (SetSTN) Set Audio stream = gprm(0)



Function "Jump to PGC upon DVD insert" me wasn't know. Test am her and I thinkthat the isn't fit use her when has before menu play back some clip. Perhaps mislead. Is that a possible?

[blutach]

@wencaS

Just trace through till you get to your menu...any menu. Then go to the audio menu and select your language. Same for subtitles menu. Then return to main menu and execute the macro.

Regards

[wencaS]

Already am auditioned much possibility, but always me speed ill play back title 3 and VTSM 1 RootMenu CELL1. All the time me begins spooling out as far as VTSM 1 RootMenu CELL2! Would be possible it by hand adjust, but it'd stracela function utility.

Fecit here pared menu (5,7 MB). Let here here only it substantial improvement. Acts me about theatrical release near special edition am onwards menu removed.
Whereat place then exactly apply "Jump it PGC devolve DVD insert" macro?
Original ifo

Here near that film am default audio solved simple adjustment precommands, only it on him examine.

[blutach]

I think I understand what you mean.

Here your issue is that it plays cell 1 (the intro) only when first inserted. After you return to the root menu it will always play cell 2. This is not the worst thing but I can understand you don't want it when the disk is inserted for the first time.

But if you trace to the root menu (only goes to title 3, unsetting the resume flag (GPRM(7)=0) and that is all), then to the audio menu (PGC 12 after selecting languages in the main menu PGC10) and the subtitles menu, you will return to the root menu and play cell 2. My advice is simply to put up with this.

By the way, there is a big authoring error in special edition (PGC2). If you pick languages, instead of going to PGC 12, it goes into an endess loop in PGC4. Also, there are no buttons in PGC3 (scene slection menu). So something is wrong with this menu.

By the way, there is a lot of unreferenced material in VIDEO_TS.VOB which can be eliminated with VobBlanker.

After you have fixed these authoring errors, the place to run the macro would be AFTER you return to the root menu after picking your languages. OK?



Regards

[wencaS]

Yes. Already that I can understand. If is in PGC more cells and menu isn't at once first cell it is impossible arrange playback 1. cell.

In special edition am for here demonstration the rest menu removed, by got smaller size (for mine inquiry was needless, special edition has only 1 audio freeze and dealt then just about Theatrical released).

Thanks for answerback patience.

[blutach]

Ah, OK, I didn't know that's what you wanted.

Regards