PGCEdit - Looping a DVD menu

[rock_king_my]

Hi.

Is there an easy way of looping a menu?

Say it runs for 30 seconds & I want that to repeat itself (looping) with PGCEdit.

I tried to rip a retail DVD, put it through Vobblanker & PGCEdit.

Now that [Special Features] menu just stops after 30 secs (its max running time).

Cheers!

[blutach]

Make the 1st post command Link cell 1. If there are cell commands, they will be executed first, however, so you may need to examine them.

Regards

[rock_king_my]

PGCEdit & looping a menu

Hi.

I think these are the commands at the moment on that PGC with menu I wanna loop.

The menu is a stills menu (non animated) but got audio in background.

Note that there are really 3 Cells in that PGC.
I blanked the Cells 1 & 3 so I just wanna loop Cell 2. ( that menu)

********** pre commands:
[71 00 00 0D 00 00 00 00] 1 Set gprm(13) =(mov) 0
[75 00 00 08 04 00 00 00] 2 Set gprm(8) *=(mul) 1024
[46 00 00 00 00 08 00 00] 3 (SetHL_BTN) Set Highlighted Button =(mov) gprm(8)
[20 B6 00 06 00 09 00 02] 4 if ( gprm(6) != 9 ) then { LinkPGN Program 2 }
[71 00 00 06 00 00 00 00] 5 Set gprm(6) =(mov) 0
********** post commands:
[20 07 00 00 00 00 00 02] 1 LinkCN Cell 2
[71 00 00 08 00 02 00 00] 2 Set gprm(8) =(mov) 2
[20 A4 00 05 00 63 00 08] 3 if ( gprm(5) == 99 ) then { LinkPGCN PGC 8 }
[71 00 00 08 00 01 00 00] 4 Set gprm(8) =(mov) 1
[20 A4 00 05 00 02 00 15] 5 if ( gprm(5) == 2 ) then { LinkPGCN PGC 21 }
[20 A4 00 05 00 03 00 0C] 6 if ( gprm(5) == 3 ) then { LinkPGCN PGC 12 }
[20 A4 00 05 00 04 00 0F] 7 if ( gprm(5) == 4 ) then { LinkPGCN PGC 15 }
[20 A4 00 05 00 05 00 0D] 8 if ( gprm(5) == 5 ) then { LinkPGCN PGC 13 }
[20 A4 00 05 00 06 00 12] 9 if ( gprm(5) == 6 ) then { LinkPGCN PGC 18 }
[20 A4 00 05 00 07 00 13] 10 if ( gprm(5) == 7 ) then { LinkPGCN PGC 19 }
[71 00 00 00 27 10 00 00] 11 Set gprm(0) =(mov) 10000
[71 00 00 06 00 03 00 00] 12 Set gprm(6) =(mov) 3
[75 00 00 06 00 64 00 00] 13 Set gprm(6) *=(mul) 100
[63 00 00 00 00 06 00 00] 14 Set gprm(0) +=(add) gprm(6)
[61 00 00 03 00 88 00 00] 15 Set gprm(3) =(mov) sprm(8:Highlighted button number)
[76 00 00 03 04 00 00 00] 16 Set gprm(3) /=(div) 1024
[63 00 00 00 00 03 00 00] 17 Set gprm(0) +=(add) gprm(3)
[61 00 00 04 00 05 00 00] 18 Set gprm(4) =(mov) gprm(5)
[20 04 00 00 00 00 00 0A] 19 LinkPGCN PGC 10
********** cell commands:
[20 01 00 00 00 00 00 05] 1 LinkTopPG

Can you help me from here?

Cheers!

[blutach]

Well, it's gunna loop anyway! Cell command 1 should make it loop - just make sure that the cell command is assigned to the final cell you want to play in the PGC. Do that in the PGC Editor.

Now, if there are any button commands that have Link Tail PGC in them, the nav will be broken, by the Link CN 2 (1st post) command. So, I would delete that (unless it is the original).

Regards

[rock_king_my]

More info

Hi Blu.

Thanks for response but .. err.. I don't get it.

I hope post #3 was useful.

What do I change from all those line commands.

I mean Step by step slowly, please ...

[blutach]

Remove post command 1.

Open the PGC in the PGC Editor. Ensure in the cell command column, a 1 is there after the last cell. OK.

Regards

[rock_king_my]

Works!

Ok .. it loops ..

CHEERS!