NEC ND-1300A : firmware/drivers/Nero ?

[ashy]

Its purchased with my Plextor CD recorder .. Seems like they gave me an inferiour version, without mentioning it.

Yes, your OEM software is simply locked to only work with Plextor.
I don't like this sort of thing and think it is unreasonable because the price of the software is included in the retail price of the package (even though they say it is free) and should therefore work with any burner.

Normally I don't do this, but seeing as you legally own this software all you need to do is change the serial key to a full version.

You can find this key on google. Just do a search for it using the name Nero and the version number.

[David_Janssen]

Originally posted by ashy
Yes, your OEM software is simply locked to only work with Plextor.
I don't like this sort of thing and think it is unreasonable because the price of the software is included in the retail price of the package (even though they say it is free) and should therefore work with any burner.

Normally I don't do this, but seeing as you legally own this software all you need to do is change the serial key to a full version.

You can find this key on google. Just do a search for it using the name Nero and the version number.

No. because then, with each new upgrade you need a new
serial number, with a legal one you don't need a new serial number with each new upgrade.

[ashy]

No. because then, with each new upgrade you need a new serial number

Just what are you talking about? Have you read any of the previous thread? Do you even know what you are refering to?

Once you have entered a full serial (yes like the one that Nero will give you when you legally purchase a full version of Nero) the program will then be unlimited and therefore any future upgrades with same version number will be accepted and will NOT require a new key.

[David_Janssen]

Originally posted by ashy
Just what are you talking about? Have you read any of the previous thread? Do you even know what you are refering to?

Once you have entered a full serial (yes like the one that Nero will give you when you legally purchase a full version of Nero) the program will then be unlimited and therefore any future upgrades with same version number will be accepted and will NOT require a new key.

Okay, but as far as i know, there are still no Nero 6.x OEM
versions, or are there ? the nice "thing" of a OEM version is,
you never have to type your serial in when installing, or
upgrading.....
Upgrading from 5 to 6 needs a new serial....

[polo]

Sorry for my english ,I am french speaking
Hello
My problem is as follows:
I was in possession of Nero 5.5 OEM and I had bought module MPEG to be able to encode the SVCD and DVD.
My configuration was: PC AMD2000, Chipset NvidiaK7,512Mb SDRAM, W98SE, DVD NEC1300A, HD 80Gb
I created several DVD and SVCD without problems of reading on my DVD of living room.
Since the beginning of January I have a new PC Configuration: PC INTEL 2.6, chipset Intel865, Dual memory channel, Hyperthreading, 1024 MB GDR, XP PRO, DVD NEC1300A, HD 80+120Mb.
When I create a DVD or SVCD,the conversion and engraving normally carries out with the message "engraving succeeded". But no engraved disc is readable on my dvd of salon.(on the NEC no problem).
However I use the same engraver and the same DVD blanco.
I tested with all them, kinds of DVD(+, +RW, -, -RW).
What must I do?
Pass by again to the 5.5 and to test?
thank you

[ashy]

Which version of NERO are you using and what model of DVD player do you have?

[polo]

I have upgraded to 6302.
My DVD player come from Holland.It is HC5.1
Inside: DVD SHINWA SHD 2502
Eprom 29F40 label DVD810
Chipset AVS Tech AV3169 +AV2188
Memory:M12L161 (x2)

[David_Janssen]

Polo, Did you have to install Nero for the second time on your
new hardware setup ? check for prefferences in Nero,
You can't choose the ISO/UDF ROM option like in Nero 5.x,
you must choose the "VIDEO" option in Nero 6.x and drag your
vob and ifo files into the left video_ts folder...
if you already did this, try to remember which "default" settings
you changed in past or present..

Fug.

[polo]

Hello

I continue testing.
New install of Nero6
I have check your solution
Always the same problem !
Now I check a new engraver Sony Usb2/Firewire with same result
All the engraved DVD working without problems on the PC DVD but not on a domestic DVD player (I try 3 different DVD player)
I have also tested different types of DVD (+,,philips,princo,leadtec)
Polo

[David_Janssen]

Originally posted by polo
Hello

I continue testing.
New install of Nero6
I have check your solution
Always the same problem !
Now I check a new engraver Sony Usb2/Firewire with same result
All the engraved DVD working without problems on the PC DVD but not on a domestic DVD player (I try 3 different DVD player)
I have also tested different types of DVD (+,,philips,princo,leadtec)
Polo

The only thing i can think of is, that you're using DVD ROM,
instead of DVD VIDEO, that's the main change between 5.x
and 6.x , de-install Nero complete, and re-install.
you don't have any other burn packages installed ?
You also installed MS XP upgrade #1 ?