Bad Burns, Coasters EVERYWHERE...

**cynthia** · 15 Oct 2004, 01:12 PM

CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: Off

Enable DMA - http://club.cdfreaks.com/showthread.php?t=101616

Disc Manufacturer: PRINCO -

Princos are tricky to burn. You need the right firmware and luck. I would go for the Verbatim RW disc. Atleast you will not waste any discs. When you can burn that one - you know your system is ok and you can try with other brands.

**BoonDock** · 16 Oct 2004, 12:36 AM

Ahhh....

Thanks for the reply!!

I already have the dropdown set to 'DMA if available'.

Is there any reason the drive would default to 'PIO Only'?

**BoonDock** · 16 Oct 2004, 03:31 AM

Ok, that worked, but now I'm getting a new error (with the princo discs):

'Session fixation error'

Any ideas?

Here's the new log:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <Slimtype DVDRW SOSW-852S>Version: PS01 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PS01 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 610MB (625096kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.10.2004
UDF/ISO compilation
12:32:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started

12:32:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)

12:32:34 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:32:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted

12:32:34 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

12:32:34 PM #6 Text 0 File Writer.cpp, Line 124
Writer Slimtype DVDRW SOSW-852S running

12:32:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:32:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:32:34 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

12:32:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2227743 (495:03.18, 4351MB)

12:32:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

12:32:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

12:32:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:32:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2227744 (2227744) = #2227744/495:3.19
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227744 blocks [Slimtype DVDRW SOSW-852S ]
--------------------------------------------------------------

12:32:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Slimtype DVDRW SOSW-852S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562419712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2227744 | lead-out | 1 | 0x00 | 0x41

12:32:35 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

12:32:35 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

12:32:35 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

12:32:35 PM #19 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2x (2,770 KB/s)

12:32:35 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:32:35 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 27:33,404 (1653404ms) -> OK

12:32:35 PM #22 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode

12:32:35 PM #23 Text 0 File Mmc.cpp, Line 20660
Set BUFE: SMART-BURN -> ON , Generic write control : ON

12:32:35 PM #24 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes

12:32:35 PM #25 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:32:40 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
12:32:40.578 - Slimtype DVDRW SOSW-852S\H1 T0 : Queue again later

1:00:39 PM #27 Text 0 File WriterStatus.cpp, Line 115
<Slimtype DVDRW SOSW-852S > start writing Lead-Out at LBA 2227744 (21FE20h), lenght 0 blocks

1:00:39 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:00:39 PM #29 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2227743

1:03:33 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

1:03:35 PM #31 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

1:03:35 PM #32 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
Session fixation error

1:03:35 PM #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

1:03:36 PM #34 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1

1:03:36 PM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

1:03:36 PM #36 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

1:03:36 PM #37 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**lgha** · 16 Oct 2004, 03:47 AM

As Cynthia stated above these disc are iffy at best. Use a better quality of disc.

**Mig$y** · 16 Oct 2004, 04:08 AM

Yep, gotta agree with lgha and cynthia. Princo suck....
Invest in some Ritek Grade A media...

**BoonDock** · 16 Oct 2004, 04:12 AM

Thanks for the help all!

**cynthia** · 16 Oct 2004, 09:34 AM

Hmm, as a matter of fact i do in a curious way like Princos. When I began burning they where the cheapest.

The trick is to find a hacked firmware - i didn't find any in those days. In early days there where a lot of guides on how to hack your own firmware. I got it to work if I only burned at 2x. Then the Verbatim sank in price and I moved over to them.

Princo is tricky but not impossible. There are a lot of other brands (no longer in the market - wonder why...) that I never had any luck with. Hope I can donate all my odd old brands to a museum someday.

I think that your problem is that your burner/firmware don't cover the mediacode of Princo. Could give it a last try to burn at 1x.

**Mig$y** · 16 Oct 2004, 10:27 AM

Originally posted by cynthia
Hmm, as a matter of fact i do in a curious way like Princos.

I have also burned them sucessfully but have had too many bad experiences with them to agree, still, I guess they do work for some

With the price of more reliable media so cheap at the mo', discs that are made with the Princo dye are simply not an option (at least for me, anyway)

**BoonDock** · 28 Oct 2004, 04:11 AM

Follow Up...

I got some Ritek media as per cynthia's suggestion, and it worked on the first try at 2x.

Apparently, this burner (Lite-On Slimtype SOSW-852S) is pretty picky when it comes to media.

Thanks again!!

Bad Burns, Coasters EVERYWHERE...

Bad Burns, Coasters EVERYWHERE...

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment