Burn failed at 8x with External burner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Goldy86911
    Gold Member
    Gold Member
    • Nov 2004
    • 101
    #1

    Burn failed at 8x with External burner

    Thanks for any help.
    I just purchased a Mad Dog 16xDL external burner and tried three times to burn a DVD without success. It uses a USB 2 connection. I use nero to burn and I will paste the log failure.
    I installed the new drivers as well.
    I will be sending the burner back tomorrow to tigerdirect!!!!
    Goldie
    Can anyone understand this log and help me?



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 10:25:04 AM
    Nero version: 6.0.0.11 (Nero Express)
    Recorder: <MAD DOG MD-16XDVD9> Version: 2.F6 - HA 2 TA 0 - 6.0.0.11
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <JLMS XJ-HD166S >Version: DPS6 - HA 1 TA 1 - 6.0.0.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HP DVD Writer 300n atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523628kB)
    Free physical memory: 214MB (219228kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.11.2004
    DVD-Copy on the fly
    4:49:19 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    4:49:19 PM #2 Text 0 File Writer.cpp, Line 127
    Writer MAD DOG MD-16XDVD9 running

    4:49:19 PM #3 Text 0 File DVDCopy.cpp, Line 173
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2286160 = 2286160, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    4:49:19 PM #4 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    4:49:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 228
    Last possible write address on media: 2295103 (510:01.28)
    Last address to be written: 2286159 (508:02.09)

    4:49:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 233
    Write in overburning mode: FALSE

    4:49:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 1722
    Recorder: MAD DOG MD-16XDVD9, Media type: DVD+R

    4:49:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 768
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [MAD DOG MD-16XDVD9 ]
    --------------------------------------------------------------

    4:49:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 937
    Prepare recorder [MAD DOG MD-16XDVD9 ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682362880, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286160 | lead-out | 1 | 0x00 | 0x41

    4:49:19 PM #10 Phase 36 File dlgbrnst.cpp, Line 1843
    Burn process started at 8x (11,040 KB/s)

    4:49:19 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2130
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    4:49:19 PM #12 SCSI -1066 File Cdrdrv.cpp, Line 1205
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02F06000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    4:49:19 PM #13 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 7:12,886 (432886ms) -> OK

    4:49:19 PM #14 Text 0 File DVDPlusRW.cpp, Line 553
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:51:06 PM #15 SCSI -500 File Cdrdrv.cpp, Line 1415
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03D80000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x03 0x55 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    4:51:06 PM #16 Text 0 File Writer.cpp, Line 455
    16:51:06.484 MAD DOG MD-16XDVD9 : WriteBuffer reduced to 32768 Bytes

    4:51:06 PM #17 Text 0 File Writer.cpp, Line 318
    16:51:06.500 - MAD DOG MD-16XDVD9 : Queue again later (Intervall : 5msec)

    4:51:07 PM #18 Text 0 File Writer.cpp, Line 444
    SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer

    4:51:07 PM #19 Text 0 File Writer.cpp, Line 455
    16:51:07.046 MAD DOG MD-16XDVD9 : WriteBuffer reduced to 30720 Bytes

    4:51:07 PM #20 SCSI -1114 File Cdrdrv.cpp, Line 1415
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04291000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x03 0x55 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    4:51:07 PM #21 CDR -1114 File Writer.cpp, Line 335
    Reset occurred

    4:51:07 PM #22 Text 0 File ThreadedTransfer.cpp, Line 227
    all writers idle, stopping conversion

    4:51:07 PM #23 Text 0 File ThreadedTransfer.cpp, Line 221
    conversion idle, stopping reader

    4:51:07 PM #24 SCSI -1064 File Cdrdrv.cpp, Line 1415
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04291000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x03 0x55 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x21 0x02

    4:51:07 PM #25 Phase 127 File dlgbrnst.cpp, Line 1843
    Generating DVD high compatibility borders

    4:51:07 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:51:07 PM #27 Phase 129 File dlgbrnst.cpp, Line 1843
    Generating DVD borders completed successfully

    4:51:07 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:51:07 PM #29 Phase 38 File dlgbrnst.cpp, Line 1843
    Burn process failed at 8x (11,040 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Last edited by Goldy86911; 11 Nov 2004, 05:39 AM.
    Tags: None
    • setarip
      Retired
      • Dec 2001
      • 24955
      #2
      You appear to be experiencing a buffer overrun/underrun, while trying to burn at 8X.

      Try burning at 2X or 4X (preferably 2X)

        Comment

        • Goldy86911
          Gold Member
          Gold Member
          • Nov 2004
          • 101
          #3
          THANKS- But what's the point of a 16x burner and not be able to burn at that speed?
          I'm returning it today.
          Goldie

            Comment

            • cynthia
              Super Moderatress
              • Jan 2004
              • 14278
              #4
              1. Please remove your serialnumber form your post above.
              2. Your burner can burn at 16x - buth you need media that are certified for that speed. The discs you are trying to burn at 8x - are they labeled 8x?
              3. You are using Nero version 6.0.0.11 - download latest version 6.6.0.1. In versions later than yours - there has been major fixes in the program to cope with USB2 devices.
              4. Latest version of the firmware is 2.F9 - you are using 2.F6.
              5. Your burner is a rebadged NEC ND-3500AG. A very good burner.
              6. The Queue again message indicates that you are burning with to high speed for that media.
              7. What brand of discs do you use?
              8. In general - if you want an external burner and your PC have firewire extensions - it's less tricky to attach burners to such a device than thru an USB.

              Page not found · GitHub Pages
              http://forum.rpc1.org/dl_firmware.php?download_id=1906

              http://www.mdmm.com/support/drivers.asp
              Last edited by cynthia; 11 Nov 2004, 03:06 AM.

                Comment

                • Goldy86911
                  Gold Member
                  Gold Member
                  • Nov 2004
                  • 101
                  #5
                  Cynthia,
                  Thanks for your reply. Yes the media is TDK8x.
                  To me it's not woth the risk of trying to make something that should work work!!!
                  Do you think I'd have the same problems with a internal 16x burner if installed properly? Or would I still need all that firmware?
                  Thanks again for taking the time to reply,
                  Goldie

                    Comment

                    • cynthia
                      Super Moderatress
                      • Jan 2004
                      • 14278
                      #6
                      An internal burner is always much easier to cope with. USB devices can be tricky. So if you can - get yourself an internal one. TDK is good media. The firmware needs to be updated sometimes - mainly because of the releases of new medias. If the new media don't exist in your firmware - your burner will not recognize it and fail to burn.

                        Comment

                        • Goldy86911
                          Gold Member
                          Gold Member
                          • Nov 2004
                          • 101
                          #7
                          Thanks for all your help!!!!
                          Goldie

                            Comment

                            • cynthia
                              Super Moderatress
                              • Jan 2004
                              • 14278
                              #8


                              (Don't forget to remove the serialnumber in your first post - 1A23-xxxx-xxxx-xxxx-xxxx)

                                Comment

                                Previous template Next
                                Working...