Tweet
Hello.
Wondering if you have any insights on this.
Hardware:NEC nd-1300a "box" version (true NEC--not OEM).
OS:WinXP Pro sp1
Burning software: Sony DVD Architect 1.0d & Roxio Creator Classic 6.1.1.7
Media:
Memorex DVD-R 4x (purple dye) Verbatim DVD-R 4x (purple dye)
TDK DVD-R 4x (purple dye)
It's worked okay since I've gotten it--kinda picky on what it would read/burn for CD's (even commercial CD's)--but was fine for DVD burning until now.
I had been using the Memorex for months with NO coasters. 5 days ago, I successfully burned a data disc.
2 days ago, successfully burned a video project on Verbatim media.
Last night I tried burning the same video project on the same Verbatim media, and it only got past the "Lead-in" burn, then it hung forever at the Track burn stage. Then it gave me the following error (in Sony DVD Architect 1.0d):
'SFMMCX'-(17)
'atapi'-(1)
-'_NEC DVD_RW ND-1300A 1.0B'-(0)
Module sfmmcx.cpp Line 1682
An illegal request was received.
The disc can't be written. It is an incompatible format.
Status: 00020202
Command: 2a 00 00 00 12 40 00 00 20 00
Sense: 05 30 05
Info: 00 00 00 00
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00
---------------
In Roxio, it would burn the lead-in just fine also, but as soon as it started on the Track burning phase, it would hang and eventually give a similar error about he disc being an incompatible format.
I tried a Memorex disc--same thing.
I updated firmware from 1.08 (original) to 1.0B (official)--no change.
I tried TDK 4x media today--same thing.
The Nero info tool and confirmed it's recognizing the media as blank DVD-R.
It burns CD-R's as it always has.
I've tried everything I can think of, short of taking it apart to check the laser lense (which I DO NOT want to attempt). I don't think it's a media issue, because the same media worked fine just a couple days ago.
Anything else you can think of?
Thanks in advance.
Wondering if you have any insights on this.
Hardware:NEC nd-1300a "box" version (true NEC--not OEM).
OS:WinXP Pro sp1
Burning software: Sony DVD Architect 1.0d & Roxio Creator Classic 6.1.1.7
Media:
Memorex DVD-R 4x (purple dye) Verbatim DVD-R 4x (purple dye)
TDK DVD-R 4x (purple dye)
It's worked okay since I've gotten it--kinda picky on what it would read/burn for CD's (even commercial CD's)--but was fine for DVD burning until now.
I had been using the Memorex for months with NO coasters. 5 days ago, I successfully burned a data disc.
2 days ago, successfully burned a video project on Verbatim media.
Last night I tried burning the same video project on the same Verbatim media, and it only got past the "Lead-in" burn, then it hung forever at the Track burn stage. Then it gave me the following error (in Sony DVD Architect 1.0d):
'SFMMCX'-(17)
'atapi'-(1)
-'_NEC DVD_RW ND-1300A 1.0B'-(0)
Module sfmmcx.cpp Line 1682
An illegal request was received.
The disc can't be written. It is an incompatible format.
Status: 00020202
Command: 2a 00 00 00 12 40 00 00 20 00
Sense: 05 30 05
Info: 00 00 00 00
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00
---------------
In Roxio, it would burn the lead-in just fine also, but as soon as it started on the Track burning phase, it would hang and eventually give a similar error about he disc being an incompatible format.
I tried a Memorex disc--same thing.
I updated firmware from 1.08 (original) to 1.0B (official)--no change.
I tried TDK 4x media today--same thing.
The Nero info tool and confirmed it's recognizing the media as blank DVD-R.
It burns CD-R's as it always has.
I've tried everything I can think of, short of taking it apart to check the laser lense (which I DO NOT want to attempt). I don't think it's a media issue, because the same media worked fine just a couple days ago.
Anything else you can think of?
Thanks in advance.
Comment