problems burning

[Nicky2]

Hopefully someone can help? ive tried backing up some dvd's using dvd shrink and on 4 occasions have got messages similar to the attached.....i dont want to waste anymore dvds....any ideas?

[cynthia]

Post your log file from this location: C:\Program Files\Ahead\Nero\NeroHistory.log

[Nicky2]

Thanx for your rapid response cynthia, problem is the only log i seem to have is from a successfull burn

[charlypuss]

Hi Nicky2,

Scroll down through the log. Check the dates, for reasons unknown the oldest burn is at the top.... If you did it then it's in there......

[Nicky2]

Thanx Charlypuss, here is everything in the log, sorry if its long, but im only just beginning to learn.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.15 - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
_NEC DVD_RW ND-2510A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 95MB (98276kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.12.2004
NeroAPI
07:34:38 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

07:34:38 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

07:34:38 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

07:34:39 #4 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:34:39 #5 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:34:40 #6 Text 0 File Reader.cpp, Line 127
Reader running

07:34:40 #7 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running

07:34:40 #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

07:34:40 #9 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

07:34:40 #10 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

07:34:40 #11 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media

07:34:40 #12 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285961 (507:59.36, 4464MB)

07:34:40 #13 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO

07:34:40 #14 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

07:34:40 #15 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

07:34:40 #16 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

07:34:41 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386990080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

07:34:50 #18 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

07:34:50 #19 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

07:34:50 #20 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

07:34:50 #21 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

07:34:50 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

07:34:50 #23 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

07:34:50 #24 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

07:34:50 #25 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

07:34:50 #26 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

07:34:50 #27 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:34:50 #28 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:34:50 #29 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:34:50 #30 Text 0 File DVDR.cpp, Line 5095
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

07:34:55 #31 Text 0 File Cdrdrv.cpp, Line 1282
07:34:55.773 - _NEC DVD_RW ND-2510A\H1 T1 : Queue again later

07:49:06 #32 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

07:49:06 #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

07:49:06 #34 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 2286111

07:49:18 #35 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:49:18 #36 Text 0 File DVDR.cpp, Line 5949
Book Type counter: 500, Book Type selected in EEPROM, command version 0

07:49:18 #37 Text 0 File DVDR.cpp, Line 5095
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

07:49:18 #38 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)

07:49:19 #39 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

07:49:19 #40 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 08:53:04
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 10:02:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[20.12.2004]------------------------------------
07:34:39 Robot error messages from:
====== *** NeroAPI, History File *** ======

[charlypuss]

If this is the complete contents of your burn log, then on the last 4 occasions NERO did not start as there is no record of them in your burn log. As you said this shows only a succesful burn. For trial / testing purposes use DVD RW media then you are not making a full set off coasters. Any chance of finding out what is behind the DVDShrink error pop up ? Try again and when the error comes up put the mouse pointer onto the blue border at the top of the pop up and move it to one side. Then post a copy here. I have no doubt someone will have the answer.

[Nicky2]

thanks again Charlypuss, i guess a DVD RW media means i can keep on Rewriting over the same disk..... i will try and purchase some tomorrow, and will give it another go, and post anymore error messages that occur.... thanx for your patience and time

[charlypuss]

No worries.... Don't buy too many RW's

[cynthia]

You are dealing with a -R disc - don't use bitsetting/book mark on that type of discs - it's only for +R/+RW media.

[Nicky2]

Thanks Cynthia, where do i find the setting "bitsetting/book mark" so that i can change it? ive looked in preferences but no luck.

[crewleader1]

help my dvd shrink is nuts

i need help. i had been using dvd shrink 3.2 and had no problems. now i am having alot. i defrag and i still don't get it. i back up a movie and it has glitches and freezes.what is wrong with it & how can i fix it ? i have ruined 30 discs trying to fix it.

[TRI0N]

Nero SDK? Doesn't that mean Software Developers Kit and not a Full Version of Nero or SE?

If so does the SDK have all the features of a Release Version?

[cynthia]

Originally posted by Nicky2
Thanks Cynthia, where do i find the setting "bitsetting/book mark" so that i can change it? ive looked in preferences but no luck.

In the backup section of shrink under tab "burn settings".

[cynthia]

Originally posted by TRI0N
Nero SDK? Doesn't that mean Software Developers Kit and not a Full Version of Nero or SE?

If so does the SDK have all the features of a Release Version?

DVDShrink only uses it's subroutines for the burning. Yes - you can write a program and do the acutal burning from that program but you have to have a normal licensed Nero installed also for the actual burning.

[charlypuss]

Hi Nicky2,

Are you still out there ? problem sorted ?