Major Nero burning issues

[mvill]

I need help!!!

please....

I"m been using DVD Shrink and Nero to burn DVD's.

My Pioneer A08L is only 4mths old.

But, for some reason, I keep getting a "burn failed" message now with any speed that I try to burn. (4x, 6x, 8x or 16x)

I don't know what the problem is....

any help would be greatly appreciated.

Thank you.

[jmet]

Could you post a log file from Nero ?

To do so, go here: C:\Program Files\Ahead\Nero
Look for a file named "NeroHistory.log"
Open that file up and copy it.
Then paste it here.
*** Don't forget to remove your serial # from the post.**

[mvill]

Log (???)

I think the below is it....let me know if I omitted anything..

thx.



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.10 - HA 1 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <PIONEER DVD-ROM DVD-115R>Version: 1.25 - HA 1 TA 1 - 6.3.1.12
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-108 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-ROM DVD-115R atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-108 E: CDRom0
PIONEER DVD-ROM DVD-115R F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260640kB)
Free physical memory: 85MB (87872kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.1.2005
UDF/ISO compilation
10:52:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started

10:52:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)

10:52:00 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:52:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted

10:52:00 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

10:52:00 PM #6 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-108 running

10:52:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:52:01 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:52:01 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

10:52:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1963759 (436:23.34, 3835MB)

10:52:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

10:52:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

10:52:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:52:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1963760 (1963760) = #1963760/436:23.35
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963760 blocks [PIONEER DVD-RW DVR-108 ]
--------------------------------------------------------------

10:52:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [PIONEER DVD-RW DVR-108 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4021780480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1963760 | lead-out | 1 | 0x00 | 0x41

10:52:01 PM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

10:52:01 PM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

10:52:01 PM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

10:52:01 PM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,540 KB/s)

10:52:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:52:01 PM #21 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 12:13,901 (733901ms) -> OK

10:52:01 PM #22 Text 0 File DVDR.cpp, Line 1833
Recording mode: Sequential Recording Mode

10:52:01 PM #23 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

10:52:01 PM #24 Text 0 File DVDR.cpp, Line 1974
Start write address at LBA 0
DVD high compatibility mode: Yes

10:52:01 PM #25 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:52:03 PM #26 Text 0 File Cdrdrv.cpp, Line 1293
22:52:03.574 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later

10:52:39 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x077B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0xEE 0xC0 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

10:52:39 PM #28 CDR -1135 File Writer.cpp, Line 304
Write error

10:52:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:52:39 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:52:39 PM #31 Text 0 File DVDR.cpp, Line 2201
EndDAO: Last written address was 767

10:52:39 PM #32 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

10:52:39 PM #33 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

10:52:39 PM #34 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[jmet]

Originally Posted By: mvill
"=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-108 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-ROM DVD-115R atapi Port 1 ID 1 DMA: Off"

Enable DMA. Learn how to do so here: http://club.cdfreaks.com/showthread.php?t=101616

"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
"

Also, try using a better media such as Ritek Ridata. FUJIFILM has been known to cause problems.

[mvill]

Enable DMA. Learn how to do so here: http://club.cdfreaks.com/showthread.php?t=101616
okay...will try the above....enabling it..

[/color]

Also, try using a better media such as Ritek Ridata. FUJIFILM has been known to cause problems. [/B][/QUOTE]

as far as fuji....I used that earlier...but I'm currently still having problems with Memorex-R..

thx. for any help your giving me...
I will keep you posted with the "DMA" info...

[jmet]

Even though you may have successfully used FUJI media in the past, it still may be the problem now. Ex. I buy a 25 pack of FUJIFILM DVD-R's, I could use the first 20 them successfully and the last 5 would fail. Could just be a faulty disc out of the bunch. Memorex is another brand that give alot of people problems.

[mvill]

enabled DMA....thx.

now trying to see if I can burn...

let's see..
will keep you updated.....because right now I'm getting a

"Queue again later
PIONEER DVD-RW DVR-108\H1 T0"

message.
what does this mean?

[jmet]

Is your burner/writer external or internal?

[mvill]

It's Internal

do you think it could be the burner?

It's been 4mths...burned a whole bunch of movies before with no problem...

[jmet]

Is it in laptop or desktop PC ?

[mvill]

in a PC.

sorry to give you such short answers, but I'm not too sure what other info you might need.

[jmet]

It could very well be the burner as I did some searching around on google, and numerous people had that "Queue again later
PIONEER DVD-RW DVR-108\H1 T0" error message. For some the solution was an updated ASPI driver, other the solution was buying a new drive.

[mvill]

excuse my lack of knowledge...

but what is "ASPI"..

where can I get it?

otherwise, what dvd burner would you recommend? (manufacture, model)

to top it off....

my failed blank media will not pop out...it's stuck..

[jmet]

mvill, I must have overlooked it earlier, but on your nero log file, it says "WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM "

I think that is your problem, give me some time to research on it before you buy another drive. lol

[jmet]

Re: the drive not ejecting. Try this, with Nero open, hit Ctrl+E