Read Errors, Burning Fails

[Goldy86911]

Can anyone figure this out? I keep getting read errors and failed burns when I try to do a copy on the fly with Nero and Alcohol 120%.
The only thing I can think of is that my drive that's reading the disc( MY HP Burner)(Yes I have two internal burners)
is not good, but when I used my newly installed Benq 1620 to read and burn to my older HP burner it came up with a disc dumping error as well.
I can get a copy on the fly when my Benq 1620 reads the disc and my HP burner burns at 2x speed.
Thanks for any help. Log file is below
Goldy


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.6
Recorder: <BENQ DVD DD DW1620> Version: B7P9 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 300n >Version: 1.25 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 300n atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HP DVD Writer 300n E: CDRom0
BENQ DVD DD DW1620 F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 642MB (658176kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2005
DVD-Copy on the fly
7:08:28 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

7:08:28 PM #2 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running

7:08:28 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2290304 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

7:08:28 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2290304 = 2290304, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

7:08:28 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

7:08:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2290303 (508:57.28, 4473MB)

7:08:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

7:08:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: BENQ DVD DD DW1620, Media type: DVD+R

7:08:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:08:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2290304 (2290304) = #2290304/508:57.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290304 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------

7:08:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4690542592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2290304 | lead-out | 1 | 0x41 | 0x00

7:08:28 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

7:08:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:08:28 PM #14 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x040B0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

7:08:28 PM #15 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: Current recorder setting

7:08:28 PM #16 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

7:25:10 PM #17 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0775E000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x28 0x00 0x00 0x22 0x62 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

7:25:10 PM #18 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

7:25:10 PM #19 Text 0 File Reader.cpp, Line 385
Exception value: -500

7:25:24 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:25:53 PM #21 Text 0 File DVDR.cpp, Line 5619
Drive: BENQ DVD DD DW1620
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

7:25:53 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[sfheath]

You might fare better reading from your G: to E: if you must do it on the fly. Your two burners are sharing an IDE controller which might lead to a bottleneck.
Personally, I'd write to hard drive, then read to burner - much more reliable.

Edit: also looks like a media brand problem, check out www.videohelp.com/dvdwriters

[Goldy86911]

Thanks for the reply.
I just installed Benq1620 which is my F: Drive. Isn't that better than my old burner which is my E: Drive?
Second. is writing to my hard drive the same making a disc image and then burn it?
Goldy

[jmet]

"is writing to my hard drive the same making a disc image and then burn it?"

Yes

[Goldy86911]

Thanks for your help!!!
Goldy

[jmet]

"Thanks for your help!!!
Goldy"

You're Very Welcome! It was my (our) pleasure!