Blade trinity ?

[Bonehead632]

Has anyone else had trouble backing up Blade Trinity? I have tried using shrink and an updated decrypter and both get failure errors at 48%. Appreciate any feed-back yall have.

[cynthia]

You should put '[IMG]' and '[/IMG]' around your link...

You got I/O errors or CRC errors? If so - have you tried to clean the disc - toothpaste is a good thing to use.

[Bonehead632]

I did try cleaning the disc......was brand new too, family then went and bought themselves a copy and I tried that 1 too....same thing.....48-49% and failed. Last error I remember seeing was a (pardon my spelling here) redundancy error. Gonna try it again ....using the info off of episode 4 problem....I think they are the same.
Ty re [img]....I shall try that too

[Bonehead632]

Ok cynthia......tried again and this is what happened. First tried to make using file command (to use VOB) and it hung up with read errors, then went back to your guide and tried lowering my read speed to 2, disabled plextor, and checked ignore read errors...when you said have it "create an ISO", did U mean read or write. (I had mine set to read) I copied my log file from my last try and pasted it below.

I 08:53:55 Operation Started!
I 08:53:55 Source Device: [1:0:0] HL-DT-ST DVD-RW GWA-4040B A112 (E (ATA)
I 08:53:55 Source Media Type: DVD-ROM
I 08:53:55 Source Media Region Code: 1
I 08:53:55 Source Media Copyright Protection System Type: CSS/CPPM
I 08:53:55 Destination File: D:\DVD Tests\BLADE_TRINITY_EXTENDED.ISO
I 08:53:55 File Splitting: Auto
I 08:53:55 Read Speed: 2x
I 08:53:55 Detect Mastering Errors: No
I 08:53:55 Remove Macrovision Protection: Yes
W 08:53:55 [1:0:0] HL-DT-ST DVD-RW GWA-4040B A112 (E (ATA) - Selected Read Speed: 2,770 KB/s (2x)
W 08:53:55 [1:0:0] HL-DT-ST DVD-RW GWA-4040B A112 (E (ATA) - Actual Read Speed: 11,044 KB/s (8x)
I 08:53:55 Extracting Sectors... (LBA: 0 - 4133118)
I 08:53:56 Found IFO File: VIDEO_TS.IFO - (LBA: 1113 - 1121)
I 08:53:56 Found VOB File: VIDEO_TS.VOB - (LBA: 1122 - 10551) - KEY: E8 C1 83 82 BA
I 08:54:03 Found BUP File: VIDEO_TS.BUP - (LBA: 10552 - 10560)
I 08:54:03 Found IFO File: VTS_01_0.IFO - (LBA: 10561 - 10618)
I 08:54:03 Found VOB File: VTS_01_0.VOB - (LBA: 10619 - 141175) - KEY: E8 C1 83 82 BA
I 08:55:31 Found VOB File: VTS_01_1.VOB - (LBA: 141176 - 665417) - KEY: E8 C1 83 82 BA
I 09:00:08 Found VOB File: VTS_01_2.VOB - (LBA: 665418 - 1189650) - KEY: E8 C1 83 82 BA
I 09:03:43 Found VOB File: VTS_01_3.VOB - (LBA: 1189651 - 1713761) - KEY: E8 C1 83 82 BA
I 09:06:45 Found VOB File: VTS_01_4.VOB - (LBA: 1713762 - 2238027) - KEY: E8 C1 83 82 BA
W 09:10:53 Failed to read Sector 2059568 - Unrecovered Read Error
W 09:11:31 Failed to read Sector 2059569 - Unrecovered Read Error
W 09:12:09 Failed to read Sector 2059570 - Unrecovered Read Error
W 09:12:49 Failed to read Sector 2059571 - Unrecovered Read Error
W 09:13:28 Failed to read Sector 2059572 - Unrecovered Read Error
W 09:15:05 Failed to read Sector 2059600 - Unrecovered Read Error
W 09:15:41 Failed to read Sector 2059601 - Unrecovered Read Error
I 09:16:11 Abort Request Acknowledged
E 09:16:12 Failed to Extract Sectors!
E 09:16:12 Operation Aborted! - Duration: 00:22:16
E 09:16:12 Average Read Rate: 3,083 KB/s (2.2x) - Maximum Read Rate: 6,319 KB/s (4.6x)


When it got stuck this time, I cx the attempt at 182 retries.

[cynthia]

Just to be sure - you are running ver 3.5.4.0 of DVD Decrypter?

[Bonehead632]

Originally posted by cynthia
Just to be sure - you are running ver 3.5.4.0 of DVD Decrypter?

Yes ma'am, upgraded to that last night after the first failed attempt.

[cynthia]

Looked at some other forums and there seems to be a bunch of bad presses and apparently from more than one bundle - that is causing the problem.

[Bonehead632]

Originally posted by cynthia
Looked at some other forums and there seems to be a bunch of bad presses and apparently from more than one bundle - that is causing the problem.

Ty for your time and effort.

[SnowDolphin]

Ok HERE IS THE DEAL

You tell me how to make a new post and I will tell you the information on how to burn Blade Trinity and other problem DVD's. I seem to not be able to find were I can make new posts. I am new to the site so I do not know were I can post a new message

SnowDolphin

[cynthia]

Hi and welcome to the forum, SnowDolphin!

Not sure I understand you - you have just done a new post.

If you want to start a new thread - click here or if you just want to add a reply click here.

[SnowDolphin]

OK SO I GOOFED I DIDNT KNOW HOW TO POST THE MESSAGE RIGHT I GUESS. I WAS JUST TRYING TO HELP PEOPLE OUT. I DID IT THE WAY I THOUGHT WAS A GOOD WAY. I AM SORRY. SO HOW DO I TELL PEOPLE THEN HOW TO DO IT ?

SNOWDOLPHIN

[cynthia]

Don't refere to pirated sources.

[SnowDolphin]

I am sorry but I dont understand what you mean?
Like I said I am new to the forum and dont understand can you please explain.

Thnaks,
Snowdolphin

[cynthia]

This is your line:

'I Know I was having a terrible time downloading and burning Blade Trinity and other movies. '

This is admins lines in the forum rules:

'Please do not refer to pirated contents (including software/movies/music ...) - posting messages about movies you downloaded off Kazza or some other illegal means will not help you, and may get you into trouble with the authorities. For more information regarding what kind of posts are acceptable, please read this message.

I don't think that 'Blade Trinity' is released as a 'free' movie.

That's the whole 'thing'. It could be that your word 'downloading' is the process we normally call 'ripping' if you used a program such as DVD Decrypter.

[SnowDolphin]

I can assure you I did not download the movie off of Kazaa.
I can also assure you I didnt pirate the movie. So I dont know what you mean. I do not pirate. Ok so with Sony ArccOS dvd burners there is a problem downloading and buring movies. Is this correct ? If so what do you use to bypass the Sony ArccOS dvd burner. Can you explain that to me or no.

Snowdolphin