Error Message & Failure During Burn

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BlkPanther
    Junior Member
    Junior Member
    • May 2005
    • 9

    Error Message & Failure During Burn

    I hope I can get help here. I have the latest version of DVD shrink & DVD Decrypter. My OS is Windows XP with plenty of RAM. My burner is a I/O Magic 16X double layer drive. I've updated the firmware and used blanks of different speeds including 16x and followed the guides for the program preferences. I've tried burning after putting the movie in a separate folder or omitting that step; using the decrypter before using the shrink & using just the shrink with the decrypter at the same time but the burning process always fails about halfway thru the burn. Here is the error message where things start to go wrong:

    12:57:27 PM #24 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ---
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:58:00 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
    12:58:00.531 - DVDRW IDE 16X\H1 T0 : Queue again later

    12:58:08 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
    12:58:08.390 - DVDRW IDE 16X\H1 T0 : Queue again later

    1:34:42 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06AB0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x11 0x53 0x40 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    1:34:42 PM #28 CDR -1135 File Writer.cpp, Line 304
    Write error

    1:34:42 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:34:42 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    1:34:42 PM #31 Text 0 File DVDR.cpp, Line 2253
    EndDAO: Last written address was 1135423

    1:34:42 PM #32 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 12x (16,620 KB/s)

    1:34:42 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    1:34:42 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.
    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 6:30:18 PM
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (SecurityOption)
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    #2
    Can you please post the whole log?

    One thing I can see from that partial log is (And more than likely your big problem) your burner doesn't like that brand of media:
    "Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

    Comment

    • BlkPanther
      Junior Member
      Junior Member
      • May 2005
      • 9

      #3
      Error Message &amp; Burn Failure

      The ugly part is my friend has the exact same software installed on her PC and has sucessfully burned 2 movies so far. The only difference is, her burner came installed on her PC, mine was purchased separately.

      Comment

      • BlkPanther
        Junior Member
        Junior Member
        • May 2005
        • 9

        #4
        Error Message &amp; Burn Failure

        Here is the entire error log:

        Nero Serial Removed

        Windows XP 5.1
        IA32
        WinAspi: -
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
        Nero API version: 6.3.1.17
        Using interface version: 6.3.1.4
        Installed in: C:\Program Files\Ahead\Nero\Nero\
        Application: ahead\Nero - Burning Rom
        Recorder: <DVDRW IDE 16X> Version: A082 - HA 1 TA 0 - 6.3.1.17
        Adapter driver: <atapi> HA 1
        Drive buffer : 2048kB
        Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
        Connected to MMC as unknown drive with class-nr : 11
        Drive is autodetected - recorder class: DVD+R9 DL recorder

        === Scsi-Device-Map ===
        DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: Off
        CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 1 DMA: Off
        CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On

        === CDRom-Device-Map ===
        IDE DVD-ROM 16X E: CDRom0
        DVDRW IDE 16X F: CDRom1
        =======================

        AutoRun : 1
        Excluded drive IDs:
        WriteBufferSize: 70254592 (0) Byte
        ShowDrvBufStat : 0
        BUFE : 0
        Physical memory : 479MB (490992kB)
        Free physical memory: 106MB (109096kB)
        Memory in use : 77 %
        Uncached PFiles: 0x0
        Use Static Write Speed Table: 0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Enabled (1)

        6.5.2005
        NeroAPI
        12:43:15 PM #1 Phase 112 File APIProgress.cpp, Line 273
        DVD-Video files reallocation started

        12:43:15 PM #2 Phase 114 File APIProgress.cpp, Line 273
        DVD-Video files reallocation completed (no file modified)

        12:43:15 PM #3 Phase 111 File APIProgress.cpp, Line 273
        DVD-Video files sorted

        12:43:16 PM #4 Text 0 File Reader.cpp, Line 118
        Reader running

        12:43:16 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
        DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
        DRM: Beginning burn process.

        12:43:16 PM #6 Text 0 File Writer.cpp, Line 124
        Writer DVDRW IDE 16X running

        12:43:16 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
        First writeable address = 0 (0x00000000)

        12:43:16 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
        First writeable address = 0 (0x00000000)

        12:43:16 PM #9 Text 0 File Burncd.cpp, Line 3172
        Turn on Disc-At-Once, using DVD media

        12:57:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
        Last possible write address on media: 2298495 (510:46.45, 4489MB)
        Last address to be written: 2286159 (508:02.09, 4465MB)

        12:57:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
        Write in overburning mode: NO

        12:57:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
        Recorder: DVDRW IDE 16X, Media type: DVD-R
        Disc Manufacturer: TYG02 -
        Disc Application Code: 64, Disc Physical Code: 193

        12:57:26 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================
        Insert empty disc to write to.
        (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

        12:57:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
        Setup items (after recorder preparation)
        0: TRM_DATA_MODE1 (CTransferItem)
        2 indices, index0 (150) not provided
        original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
        relocatable, disc pos for caching/writing not required/required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [DVDRW IDE 16X ]
        --------------------------------------------------------------

        12:57:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
        Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
        DAO infos:
        ==========
        MCN: ""
        TOCType: 0x00; Session Closed, disc fixated
        Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
        DAO layout:
        ===========
        __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
        0 | lead-in | 0 | 0x00 | 0x41
        0 | 1 | 0 | 0x00 | 0x41
        0 | 1 | 1 | 0x00 | 0x41
        2286160 | lead-out | 1 | 0x00 | 0x41

        12:57:27 PM #16 Phase 24 File APIProgress.cpp, Line 273
        Caching of files started

        12:57:27 PM #17 Text 0 File Burncd.cpp, Line 4182
        Cache writing successful.

        12:57:27 PM #18 Phase 25 File APIProgress.cpp, Line 273
        Caching of files completed

        12:57:27 PM #19 Phase 36 File APIProgress.cpp, Line 273
        Burn process started at 12x (16,620 KB/s)

        12:57:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

        12:57:27 PM #21 Text 0 File DVDR.cpp, Line 1876
        Recording mode: Sequential Recording Mode

        12:57:27 PM #22 Text 0 File Mmc.cpp, Line 20394
        Set BUFE: Super Link -> ON

        12:57:27 PM #23 Text 0 File DVDR.cpp, Line 2017
        Start write address at LBA 0
        DVD high compatibility mode: Yes

        12:57:27 PM #24 Text 0 File Cdrdrv.cpp, Line 8120
        ---- DVD Structure: Physical Format Information (00h) ----
        Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
        Book Type: DVD-R (2), Part Version: 5
        Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
        Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
        Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
        Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
        End Physical Sector Number of Data Area: 0 h
        End Sector Number in Layer 0: 0 h
        Data in Burst Cutting Area (BCA) does not exist
        Start sector number of the current Border-Out: 0 h
        Start sector number of the next Border-In: 0 h
        Media Specific [16..63]:
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

        12:58:00 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
        12:58:00.531 - DVDRW IDE 16X\H1 T0 : Queue again later

        12:58:08 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
        12:58:08.390 - DVDRW IDE 16X\H1 T0 : Queue again later

        1:34:42 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1442
        SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06AB0000
        Status: 0x04 (0x01, SCSI_ERR)
        HA-Status 0x00 (0x00, OK)
        TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
        Sense Key: 0x03 (KEY_MEDIUM_ERROR)
        Sense Code: 0x0C
        Sense Qual: 0x00
        CDB Data: 0x2A 0x00 0x00 0x11 0x53 0x40 0x00 0x00 0x20 0x00 0x00 0x00
        Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
        0x00 0x00 0x00 0x00 0x0C 0x00

        1:34:42 PM #28 CDR -1135 File Writer.cpp, Line 304
        Write error

        1:34:42 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
        all writers idle, stopping conversion

        1:34:42 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
        conversion idle, stopping reader

        1:34:42 PM #31 Text 0 File DVDR.cpp, Line 2253
        EndDAO: Last written address was 1135423

        1:34:42 PM #32 Phase 38 File APIProgress.cpp, Line 273
        Burn process failed at 12x (16,620 KB/s)

        1:34:42 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 828
        DRM: DRM burn session terminated.

        1:34:42 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 857
        DRM: Closing entire DRM handling. Bye.


        Existing drivers:
        File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 6:30:18 PM

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

        Comment

        • BlkPanther
          Junior Member
          Junior Member
          • May 2005
          • 9

          #5
          Error Message &amp; Burn Failure

          I have "Nero6" installed and I've tried cheap bulk DVD-R's and Memorex 16X DVD-R's....same problem

          Comment

          • jmet
            Super Moderator
            • Nov 2002
            • 8697

            #6
            "Nero API version: 6.3.1.17"
            Upgrade your version of Nero. That version has alot of bugs in it. Upgrade here, download "Package 1" : http://www.nero.com/us/nero-up.php

            "1:34:42 PM #32 Phase 38 File APIProgress.cpp, Line 273
            Burn process failed at 12x (16,620 KB/s)"
            I recommend burning no faster than 4X to start out with.

            I am trying to find your burner's firmware. Your burner must have came with your computer, or is a generic.

            Do me a favor and download this program, run it and come back here and reply with what it said. - http://flashman.rpc-1.com/Firmware/D...are_detect.exe

            Comment

            • jmet
              Super Moderator
              • Nov 2002
              • 8697

              #7
              Never mind, I found it. You have the latest firmware installed.

              (Disregard my last step)

              Comment

              • BlkPanther
                Junior Member
                Junior Member
                • May 2005
                • 9

                #8
                OK..Thanks

                Comment

                • jmet
                  Super Moderator
                  • Nov 2002
                  • 8697

                  #9
                  Upgrade your Nero and burn at 4X, see if that fixes it.

                  Comment

                  • BlkPanther
                    Junior Member
                    Junior Member
                    • May 2005
                    • 9

                    #10
                    Thanks...I'll give it a shot.

                    Comment

                    • BlkPanther
                      Junior Member
                      Junior Member
                      • May 2005
                      • 9

                      #11
                      It appears that it's locked at 'Maximum' burn speed and it adjusts for the blank medium used. I can't see how to change it manually.

                      Comment

                      • setarip
                        Retired
                        • Dec 2001
                        • 24955

                        #12
                        "It appears that it's locked at 'Maximum' burn speed and it adjusts for the blank medium used. I can't see how to change it manually."

                        In DVD Shrink, UNclick "Burn with NERO" - and MANUALLY use NERO to burn. In doing so, from within NERO, you'll be able to select the burn speed...

                        Comment

                        • blutach
                          Not a god of digital video
                          • Oct 2004
                          • 24627

                          #13
                          Better still, chuck out Nero which is crap and from DVD Shrink, click Backup --> Select backup target --> ISO image file and burn with DVD Decrypter. Install DVD Decrypter from my sig, if required.

                          To get rid of Nero - use its clean tool - http://www.nero.com/en/Nero_6_Clean_Tool.html

                          Regards
                          Last edited by blutach; 8 May 2005, 11:26 AM.
                          Les

                          Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                          Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                          [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                          Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                          Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                          You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                          Explore the sites and the programs - there's a gold mine of information in them

                          Don't forget to play the Digital Digest Quiz!!! (Click here)

                          Comment

                          • BlkPanther
                            Junior Member
                            Junior Member
                            • May 2005
                            • 9

                            #14
                            Thanks....I'll try one way, then the other.....whatever works...I hope

                            Comment

                            • blutach
                              Not a god of digital video
                              • Oct 2004
                              • 24627

                              #15
                              Good luck - you will find DVD Decrypter burning a breeze.

                              Regards
                              Last edited by blutach; 8 May 2005, 11:45 AM.
                              Les

                              Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                              Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                              [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                              Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                              Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                              You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                              Explore the sites and the programs - there's a gold mine of information in them

                              Don't forget to play the Digital Digest Quiz!!! (Click here)

                              Comment

                              Working...