burning problems with a NU DVDRW DDW-082 burner and NERO

**jmet** · 9 May 2005, 04:29 PM

Could you post a log file from Nero ?

To do so, go here: C:\Program Files\Ahead\Nero
Look for a file named "NeroHistory.log"
Open that file up and copy it.
Then paste it here.

**setarip** · 9 May 2005, 05:12 PM

"When I first got my computer it worked fine, but now, it doesnt."

1) What brand, speed, and format (DVD+R or DVD-R) were you using at first?

2) How long have you had the burner?

3) Approximately how may DVDs and CDs have you burned on this burner? You might want to try running a DVD/CD cleaning disc on the burner. Maxell makes one that retails for approximately $10US

4) To determine the capabilities/limitations of your DVD burner, as well as media compatibility, go to:

dvdrhelp.com

https://www.dvdrhelp.com/dvdwriters

This domain may be for sale!

**Anthony_L** · 9 May 2005, 11:51 PM

to setarip :-
1) its a NU DVDRW DDW-082 DVD-+RW 8x DVD-+R, 4x DVD+-RW.
2) about 6 months
3) 20 or so DVD's, 40+ Cd's

**Anthony_L** · 9 May 2005, 11:55 PM

to jmet =

here is the log of the last DVD that I tried to burn, which failed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <NU DVDRW DDW-082> Version: B370 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <NU DVDRW DDW-082 >Version: B370 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : NU DVDRW DDW-082 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
NU DVDRW DDW-082 D: CDRom0
AXV CD/DVD-ROM E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 587MB (601412kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.5.2005
ISO compilation
3:08:46 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:08:46 PM #2 Text 0 File Reader.cpp, Line 126
Reader running

3:08:46 PM #3 Text 0 File Writer.cpp, Line 124
Writer NU DVDRW DDW-082 running

3:08:46 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

3:08:47 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

3:08:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1536975 (341:33.00, 3001MB)

3:08:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

3:08:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: NU DVDRW DDW-082, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

3:08:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:08:47 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1536976 (1536976) = #1536976/341:33.1
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1536976 blocks [NU DVDRW DDW-082 ]
--------------------------------------------------------------

3:08:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [NU DVDRW DDW-082 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3147726848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1536976 | lead-out | 1 | 0x00 | 0x41

3:08:47 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

3:08:47 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

3:08:47 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

3:08:47 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

3:08:47 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:08:47 PM #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 4:52,413 (292413ms) -> OK

3:08:47 PM #18 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession

3:08:47 PM #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Seamless Link -> ON

3:08:47 PM #20 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: No

3:08:47 PM #21 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:08:47 PM #22 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM

3:08:48 PM #23 Text 0 File DVDR.cpp, Line 4982
Drive: NU DVDRW DDW-082
Book Type request: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

3:09:18 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x031F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

3:09:18 PM #25 CDR -1135 File Writer.cpp, Line 304
Write error

3:09:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:09:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

3:09:18 PM #28 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 639

3:09:18 PM #29 Phase 133 File dlgbrnst.cpp, Line 1855
Writing short lead-out

3:09:18 PM #30 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

3:09:19 PM #31 Text 0 File DVDR.cpp, Line 4982
Drive: NU DVDRW DDW-082
Book Type request: DVD-R, write to EEPROM
Changing the Book Type was finished successfully, return code 0

3:09:19 PM #32 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

3:09:19 PM #33 CDR -1176 File WriterStatus.cpp, Line 164
Session fixation error

3:09:19 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

3:09:19 PM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

3:09:19 PM #36 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 3/31/2003 10:00:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

**cynthia** · 10 May 2005, 03:12 AM

Hi and welcome to the forum, Anthony_L!

CdRomPeripheral : NU DVDRW DDW-082 atapi Port 1 ID 0 DMA: Off

Enable your DMA - http://forum.digital-digest.com/show...threadid=44808

Recorder: <NU DVDRW DDW-082> Version: B370 - HA 1 TA 0 - 6.3.1.25

You have version B370 of firmware installed - latest is B377. http://forum.rpc1.org/dl_firmware.php?download_id=1743

There is also a later version of Nero available for free - http://www.nero.com/eng/nero-up.php

3:09:19 PM #31 Text 0 File DVDR.cpp, Line 4982
Drive: NU DVDRW DDW-082
Book Type request: DVD-R, write to EEPROM
Changing the Book Type was finished successfully, return code 0

No need to use Book Type on a -R disc.

**Anthony_L** · 10 May 2005, 10:38 AM

Hi cynthia, thanks for tha advice
I tried doing as you suggested (enabling DMA). I went to the link on how to do it and and under the 'Primary IDE channel properties' box, device 0 is set up the way it says to set it up but device 1 it has :
Device 1
Device Type - Auto Detection
Transfer Mode - DMA if available
Current Transfer Mode - Not Applicable

Now here is the thing.
The 'current Transfer Mode' option is grayed out and wont let me change it..
All i know is this is starting to really confuse the hell out of me

**cynthia** · 10 May 2005, 10:55 AM

Could try to see if there is a setting in your BIOS that prevents it from changing to DMA.

Perhaps an update of your mother board drivers could help.

**Anthony_L** · 10 May 2005, 04:45 PM

What would I have to look for in the BIOS??
Or how would I update the mother board driver??

**cynthia** · 10 May 2005, 04:51 PM

The IDE settings in the BIOS are they set to AUTO?

Should be three alternatives: Auto, Manual, None.

There is also another setting in BIOS that could be a problem:

IDE Prefetch mode - should be set to Enabled.
Onboard IDE-1 controller - should be set to Enabled
Onboard IDE-2 controller - should be set to Enabled
Master/Slave drive PIO/Ultra DMA mode - should be set to Auto

Motherboard drivers: Go to your mother board manufactorys homepage and download the latest.

**setarip** · 10 May 2005, 06:24 PM

To Anthony_L

1) The Ritek G05s that you are using have been reported to be problematic in several postings to these forums (G03 and G04 appear to be fine)

2) Try burning at 2X

**Anthony_L** · 10 May 2005, 10:24 PM

setarip.
I honestly thought your idea was working, but it failed at 100%

**setarip** · 11 May 2005, 05:22 AM

"setarip.
I honestly thought your idea was working, but it failed at 100%"

Then it would seem that it's time to purchase different media than Ritek G05s (Such as Ritek/Ridata G03 or G04 or Maxell)

**Anthony_L** · 16 May 2005, 05:17 PM

setarip.
took your advice. Tried the Matxell and Ritek media u suggested... same results

**cynthia** · 16 May 2005, 05:47 PM

Did you do the firmware update?

burning problems with a NU DVDRW DDW-082 burner and NERO

burning problems with a NU DVDRW DDW-082 burner and NERO

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment