Tweet
I am using DVD Shrink 3.2 and I perform a full backup and deep analysis and I save it as an .iso so I can burn it later. Once the backup is complete I use Nero 6 v 6.6.0.1 to burn the image. It successfully burns the image but in my past few backups there is consistently a section in the beginning of the complete burned movie (chapters 1-3) that is chunky, and the audio is choppy so the disc skips forward. The rest of the movie is perfectly fine and there are no errors. I have switched from a cheaper "legacy" media which has worked perfectly fine in the past, to TDK and Imation media and it has not changed the result. I have a plextor PX 708A DVD-RW and am confused. I am able to play the .iso on my computer without errors and it plays through fine? So the problem has to be the way it is getting burned and not the process of ripping it to my hard drive? Thanks for any help that anyone can supply.
-
-
How fast are you burning?
If your backup freezes, stutters, skips, or has some pixelation, it is more than likely due to poor quality media being used. Cheap media is poorly manufactured around the edge of the disc, hence the reason why it mostly skips toward the end of the movie. The two main things to consider first are:- Is it cheap media that you are using? (ie. some off brand you bought at a local computer store/fair, even a store like Circuit City or Best Buy sells cheap low quality media.)
- How fast are you burning? - Burn no faster than 4X, might have to go down to 2X with really cheap media.
Also, are you using adhesive labels on your back ups? If so, try removing the labels (if you can) and playing them again. Go here for more info on why not to use labels. - http://forum.digital-digest.com/show...threadid=28604
You can go here for some other possible solutions: http://forum.digital-digest.com/show...threadid=44912
Also try lowering outcome the "Target DVD size".
Open DVD Shrink. Click "Edit", then "Preferences". On the first tab at the top in the drop down box, change it from "DVD-5 (4.7GB) to "Custom" and enter a number of 4200MB (4464MB is burning to the edge of the disc, you want to stay away from the edge as the edge of cheap media (disc's) are poorly manufactured). Screen Shot Below:
-
Post your latest burning report from this log file: C:\Program Files\Ahead\Nero\NeroHistory.log
Comment
-
"there is consistently a section in the beginning of the complete burned movie (chapters 1-3) that is chunky"
If this is occurs when playing the burned DVD on BOTH your PC and standalone DVD player, try running a DVD/CD cleaning disc on your burner. Maxell makes one that retails for approximately $10US...Comment
-
Here is the latest nero history log report
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 11/6/2004 3:53:19 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 5:51:12 PM
Nero version: 6.6.0.1
Recorder: <PLEXTOR DVDR PX-708A> Version: 1.09 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON CD-ROM LTN526S >Version: YS0J - HA 1 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00FUA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON CD-ROM LTN526S atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-708A D: CDRom0
LITEON CD-ROM LTN526S E: CDRom1
Generic DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 142MB (146368kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.5.2005
Burn DVD Image
8:27:38 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
8:27:38 PM #2 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-708A running
8:27:38 PM #3 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
8:27:38 PM #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286036 (508:00.36, 4464MB)
8:27:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
8:27:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PLEXTOR DVDR PX-708A, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193
8:27:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:27:38 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286037 (2286037) = #2286037/508:0.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286037 blocks [PLEXTOR DVDR PX-708A]
--------------------------------------------------------------
8:27:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PLEXTOR DVDR PX-708A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681803776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286037 | lead-out | 1 | 0x00 | 0x41
8:27:38 PM #10 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5,540 KB/s)
8:27:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:27:38 PM #12 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 14:10,246 (850246ms) -> OK
8:27:38 PM #13 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
8:27:38 PM #14 Text 0 File Mmc.cpp, Line 20673
Set BUFE: BURN-Proof -> ON
8:27:38 PM #15 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
8:27:38 PM #16 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:42:08 PM #17 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-708A > start writing Lead-Out at LBA 2286037 (22E1D5h), lenght 0 blocks
8:42:09 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:42:09 PM #19 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 2286047
8:42:32 PM #20 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
8:42:32 PM #21 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
8:42:32 PM #22 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 4x (5,540 KB/s)
8:42:32 PM #23 Phase 78 File dlgbrnst.cpp, Line 1853
Data verification started
8:43:50 PM #24 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x30 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x30 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:43:54 PM #25 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x31 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x31 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:43:58 PM #26 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x32 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x32 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:44:02 PM #27 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x33 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x33 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:44:06 PM #28 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x34 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x34 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:44:10 PM #29 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x35 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x35 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
8:44:14 PM #30 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04044000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x02 0x0B 0x36 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x0B 0x36 0x0A
0x00 0x00 0x00 0x00 0x11 0x05Last edited by Mr.Orange; 15 May 2005, 04:47 AM.Comment
-
This report kept on going for a while but all the data is the same. I think all of it is from when I verify the data after burning. It stopped at 7% on the copy and I ended up having to abort it.Comment
-
You may want to edit the log you've posted - to eliminate your name and your company's name...
"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"
Your burner does not recognize the burnable media ("Disc Manufacturer: TTG02 -") that you are using - and is apparently using generic values to perform the burn.
It MIGHT be correctable by checking to see if there's a firmware update available for your <PLEXTOR DVDR PX-708A> burner at the manufacturer's official website. You presently are using firmware Version: 1.09.
To determine the capabilities/limitations of your DVD burner, as well as media compatibility, go to:
Last edited by setarip; 15 May 2005, 04:40 AM.Comment
-
Comment