Help: Burning F

**jm1647** · 20 Jun 2005, 02:09 AM

Is the DVD you put in blank - your log has "Blank check command error"

**hollonjd** · 20 Jun 2005, 02:19 AM

It seems when I put in a blank DVD disk something is writing to it something audio.

Deborah

**hollonjd** · 20 Jun 2005, 03:51 AM

When I put a blank DVD-R or a blank DVD-RW into the recorder and go to my computer and look at E: drive is is showing AudioCD.

**hollonjd** · 20 Jun 2005, 05:48 AM

Attacked is a text about my systems information.

**hollonjd** · 20 Jun 2005, 05:51 AM

Opps, here is the attached text

The attached text on Systems Information.

Attached Files

NeroInfoTool.TXT (19.1 KB, 333 views)

**jm1647** · 20 Jun 2005, 08:04 AM

It's weird it's showing you have a DVD-r in the drive. Why not try uninstalling the drive and the ide channel it's on and reinstalling them both.

**hollonjd** · 21 Jun 2005, 02:01 AM

Still Confused

I removed the drive and IDE channel, rebooted and reloaded both, rebooted again. I used DVDFab Decrypter and the opned with DVDSrink 3.2, I am using Memorex DVD-R 8X, using Nero to burn at 1X's. Still fails: Burn process failes at 1X

Nero Serial Removed

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 6:35:34 PM
Nero API version: 6.6.0.14
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 14d

Recorder: <PIONEER DVD-RW DVR-104> Version: 1.41 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <ESDI_506> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
PIONEER DVD-RW DVR-104 (Target 0, E

: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
LITEON DVD-ROM LTD163D (Target 1, F

: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523768kB)
Free physical memory: 193MB (198372kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.6.2005
NeroAPI
12:49:01 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

12:49:01 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

12:49:01 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

12:49:01 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

12:49:01 PM #5 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-104 running

12:49:01 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:49:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

12:49:01 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

12:49:01 PM #9 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

12:49:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2274623 (505:28.23, 4442MB)

12:49:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO

12:49:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193

12:49:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:49:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2274624 (2274624) = #2274624/505:28.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274624 blocks [PIONEER DVD-RW DVR-104]
--------------------------------------------------------------

12:49:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-104] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658429952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2274624 | lead-out | 1 | 0x41 | 0x00

12:49:01 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

12:49:01 PM #17 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

12:49:01 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

12:49:01 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 1x (1,385 KB/s)

12:49:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:49:01 PM #21 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession

12:49:01 PM #22 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON

12:49:01 PM #23 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: No

12:49:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:49:04 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
12:49:04.000 - PIONEER DVD-RW DVR-104\H1 T0 : Queue again later

12:49:13 PM #26 SCSI -1183 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02BC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x08 (KEY_BLANK_CHECK)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x08 0xFF 0xFF 0x03 0xF0 0x0E
0x00 0x00 0x00 0x00 0x00 0x00

12:49:13 PM #27 CDR -1183 File Writer.cpp, Line 311
Blank check command error
PIONEER DVD-RW DVR-104\H1 T0

12:49:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:49:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:49:13 PM #30 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 767

12:49:13 PM #31 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out

12:49:13 PM #32 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04

12:49:13 PM #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

12:49:13 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

12:49:13 PM #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 1x (1,385 KB/s)

12:49:13 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

12:49:13 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM

Registry Keys:

At least now the drive is not recording audio to disk before it starts the process like before. Any one with any ideas?

Cordially,
Deborah

**hollonjd** · 23 Jun 2005, 12:37 PM

Problem Solved

I ended up uninstalling Nero 6.6.014 and then reinstalling. Problem solved, now burning like the good ole days......

Deborah

**Frankensmith** · 2 Aug 2005, 01:22 PM

If your problems continue, here's a bit of info I posted in another forum. It sounds nuts, so please don't negatively critisize before trying out the 'fix' ... (it worked for me): - quote below -

You're gonna LOVE THIS!!! I found 'the fix' ... and it's surprisingly simple. I kept getting 'fixation errors' intermittently. Changed drive layouts, tested different ASPI layers, tried different media, uninstalled software, reinstalled, etc.. Still, I would get these errors intermittently. And sometimes, one right after another.

You will not believe this. But, next time you get a fixation error, check which FOLDER in Windows Explorer is highlighted. Guaranteed ... it's the FOLDER you're burning to CD or DVD. For whatever reason, Nero (in my case) will NOT complete the cd/dvd if the source folder is being accessed by Windows Explorer.

I happened to notice this 'goofy' event and 'suspected' it may be the problem to fixation errors. Sure enough, I would delete something else and the file I was about to burn was suddenly highlighted in Windows Explorer. EVERY TIME that FOLDER was highlighted, I would get a fixation error. EVERY TIME I highlighted a DIFFERENT FOLDER, the disk would burn perfectly.

Again, I know this sounds TOO simple to be the problem. Remember, next time you get a fixation error, before doing anything else, check Windows Explorer and see what FOLDER is highlighted. I would guess the same would be true for those who use "My Computer" rather than Windows Explorer.

After you've discovered I'm not a 'troll', please pass on the information to others who are having the same problem. I have a few hundred wasted cd's from 'rediculous' issues such as this. Hate to see anyone else have similar headaches.

Enjoy ...

FS

Help: Burning F

Help: Burning F

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment