can't burn anymore?please help

[jammiev]

hi, i can shrink my dvd's ok but when it comes to burning i get the error message shown below.
It burns ok for 2% then ejects the dvd?
PLease help!
thanks

Jamie & Sarah
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0P - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW LDW-851S >Version: GS0P - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : E-IDE CD-ROM 52X L atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-851S D: CDRom0
E-IDE CD-ROM 52X L E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 227MB (232816kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.7.2005
UDF/ISO compilation
20:03:53 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:03:53 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:03:53 #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

20:03:53 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:03:53 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:03:53 #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-851S running

20:03:53 #7 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

20:03:53 #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

20:03:53 #9 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

20:03:53 #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

20:03:53 #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

20:03:53 #12 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193

20:03:53 #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:03:53 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW LDW-851S]
--------------------------------------------------------------

20:03:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

20:04:23 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:04:23 #17 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

20:04:23 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:04:23 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

20:04:23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:04:23 #21 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

20:04:23 #22 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

20:04:23 #23 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

20:04:23 #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:04:42 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:04:42.076 - LITE-ON DVDRW LDW-851S\H1 T0 : Queue again later

20:05:28 #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B1B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x3F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:05:28 #27 CDR -1135 File Writer.cpp, Line 311
Write error

20:05:28 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:05:29 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:05:29 #30 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 16191

20:05:29 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 30/09/2001 17:07:12 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[jmet]

"CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 0 DMA: Off"

Turn your DMA on.

Check your DMA settings - How ? do this -> Go to Control Panel> System> Hardware Tab> Device Manager> IDE ATA/ATAPI controllers> Right Click Primary IDE channel (and Secondary IDE channel after you finish with Primary)> Properties> Advanced Settings Tab> Transfer Mode or <a href="http://club.cdfreaks.com/showthread.php?t=101616">click here to learn.</a>

Do the above from both "Primary & Secondary IDE channels".

I (We) and you need to look at whats in both "Transfer Mode" and "Current Transfer Mode". Screen shot below is what I'm talking about.


You can also look here for some other solutions: http://sniptools.com/vault/getting-b...windows-xp.htm

If it is in "PIO" mode. Click the "Driver" tab, and uninstall the driver. Then reboot. Upon rebooting windows will automatically reinstall the driver and it should go back to "DMA" mode.

"Disc Manufacturer: CMC MA - G. AF1"

CMC MAG is the worst disc you can burn to! Get some better disc.

"Sense Key: 0x03 (KEY_MEDIUM_ERROR)"

Your burner doesn't like that brand of media.

[jammiev]

thanks, it worked

cheers.

[jmet]

You're very welcome! Glad I could help.