If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4094MB (4192784kB)
Free physical memory: 2625MB (2688104kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.12.2008
ISO összeállÃtás
11:04:11 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:04:11 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:04:11 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
11:04:12 #4 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
11:04:12 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
11:04:13 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2259535 (502:07.10, 4413MB)
11:04:13 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
11:04:13 #8 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: PIONEER DVD-RW DVR-216D, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193
11:04:13 #9 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:04:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2259536 (2259536) = #2259536/502:7.11
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2259536 blocks [E: PIONEER DVD-RW DVR-216D]
--------------------------------------------------------------
11:04:13 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:04:13 #13 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
11:04:13 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
11:04:13 #15 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
11:04:13 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
11:04:13 #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11*080 KB/s)
11:04:18 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:04:18 #19 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode
11:04:18 #20 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes
11:04:18 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0bd5a3c0: Len x648
Recorder: <_NEC DVD_RW ND-4571A> Version: 1-01 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <_NEC DVD_RW ND-4571A >Version: 1-01 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-4571A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : YRAZ 0HIJK5UFC 1.03 adprrp8i Port 2 ID 0 DMA: Off
CdRomPeripheral : HS2531J SIG872C 2.0B avkhmwer Port 3 ID 0 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 110MB (113220kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.6.2009
Burn DVD Image
3:23:20 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
3:23:21 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media
3:23:21 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4171711 (927:02.61, 8147MB)
Last address to be written: 3210063 (713:20.63, 6269MB)
3:23:21 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
3:23:21 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-4571A, Media type: DVD-R Dual Layer
Disc Manufacturer ID: <PRINCO> <RDL05>
Disc Application Code: 2, Disc Physical Code: 145
3:23:21 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:23:21 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 3210064 (3210064) = #3210064/713:20.64
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3210064 blocks [E: _NEC DVD_RW ND-4571A]
--------------------------------------------------------------
3:23:41 #9 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
3:23:41 #10 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.
3:23:51 #11 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.
3:23:51 #12 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
3:23:51 #13 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started
3:23:51 #14 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.
3:23:51 #15 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed
3:23:51 #16 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 1x (1.385 KB/s)
3:23:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
3:23:51 #18 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 3210064 (6269MB), Last LBA L0: 1605039 (3134MB)
3:23:51 #19 Text 0 File DVDPlusDualLayer.cpp, Line 671
L0 Data Zone Capacity not set.
Max LBA L0 2092895 (1FEF5Fh, 4087MB), next writable address 0 (0h, 0MB)
Comment