Burning Failed at 4x in Dvd Shrink (troy)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amman4ny
    Junior Member
    Junior Member
    • Mar 2005
    • 11

    Burning Failed at 4x in Dvd Shrink (troy)

    i burned troy 2 times in nero recode 2 and there were several scenes where my player could not read the disk and then i tried dvd shrink and at about 60% I got a burn error here is entire thing from the error box , I personally suspect that yesterday by accident i put 2 cds in the same drive and that messed my drive up although I burned Coach Carter sucsessfully after that



    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/12/2003 11:04:10 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero API version: 6.6.0.8
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DW-D22A> Version: BFS1 - HA 0 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
    DiskPeripheral : HDS724040KLSA80 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DW-D22A D: CDRom0
    HL-DT-ST DVD-ROM GDR8163 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 498MB (510364kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.8.2005
    NeroAPI
    1:54:57 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    1:54:57 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    1:54:57 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    1:54:57 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    1:54:57 PM #5 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DW-D22A running

    1:54:57 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    1:54:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    1:54:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    1:54:57 PM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    1:54:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    1:54:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO

    1:54:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: SONY DVD RW DW-D22A, Media type: DVD+R
    Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    1:54:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:54:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [SONY DVD RW DW-D22A]
    --------------------------------------------------------------

    1:54:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    1:54:57 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    1:54:58 PM #17 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    1:54:58 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    1:54:58 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    1:54:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:54:58 PM #21 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: MAXELL..
    Media type ID: 002
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
    23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    1:54:58 PM #22 Text 0 File DVDR.cpp, Line 5317
    Drive: SONY DVD RW DW-D22A
    Book Type request [LO]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    1:54:58 PM #23 CDR -1211 File DVDR.cpp, Line 4763
    Book Type set to: DVD-ROM

    1:54:58 PM #24 Text 0 File DVDPlusRW.cpp, Line 638
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:20:26 PM #25 SCSI -1114 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00E70000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x15 0x99 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    2:20:26 PM #26 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    2:20:26 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:20:26 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:20:48 PM #29 Text 0 File DVDR.cpp, Line 5317
    Drive: SONY DVD RW DW-D22A
    Book Type request [LO]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    2:20:48 PM #30 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    2:20:48 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    2:20:48 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 6/12/2003 11:04:10 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 9/28/2004 7:09:24 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • LT. Columbo
    Demigod of Digital Video
    • Nov 2004
    • 10671

    #2
    "reset occured"



    "CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: Off"

    DMA off


    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)


    Comment

    • amman4ny
      Junior Member
      Junior Member
      • Mar 2005
      • 11

      #3
      Thank you for replying but I did not understand any of the "reset" stuff but i did manage to do the dma thing

      Comment

      • LT. Columbo
        Demigod of Digital Video
        • Nov 2004
        • 10671

        #4
        try again, this time on a rw disc preferably...
        "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
        Columbo moments...
        "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
        "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
        (An Exercise In Fatality, 1974)


        Comment

        • amman4ny
          Junior Member
          Junior Member
          • Mar 2005
          • 11

          #5
          I dont Have an rw disc but I burned Hotel Rwanda on dvd shrink , it said I did it sucsessfully but when i watched it once again there were several scenes where the dvd player cannot read the disc

          Comment

          • ashes
            Platinum Member
            Platinum Member
            • Aug 2005
            • 150

            #6
            Hi!

            Make sure you're not running any unnecessary programs or internet activity while you're burning.

            Does the hard drive version play properly on your PC?

            Comment

            • amman4ny
              Junior Member
              Junior Member
              • Mar 2005
              • 11

              #7
              It just has less "cannot read signs"

              Comment

              • ashes
                Platinum Member
                Platinum Member
                • Aug 2005
                • 150

                #8
                I burned Hotel Rwanda on dvd shrink , it said I did it sucsessfully but when i watched it once again there were several scenes where the dvd player cannot read the disc
                It just has less "cannot read signs"
                (Playing from your hard drive)

                Sounds like your rip from the original to your hard drive produced an imperfect backup.

                Comment

                • amman4ny
                  Junior Member
                  Junior Member
                  • Mar 2005
                  • 11

                  #9
                  well this time i tested the discs with nero and scanned the surface both of them came out very bad about 50% but know I burned BeCool and the surface scan was 100% good so I think You may be right

                  Thank you Ashes for quickly replying

                  Comment

                  • blutach
                    Not a god of digital video
                    • Oct 2004
                    • 24627

                    #10
                    If your Nero surface test came out that bad, then that's the reason for your bad playback. Strange, because Maxell makes high quality disks.

                    Regards
                    Les

                    Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                    Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                    [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                    Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                    Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                    You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                    Explore the sites and the programs - there's a gold mine of information in them

                    Don't forget to play the Digital Digest Quiz!!! (Click here)

                    Comment

                    • ashes
                      Platinum Member
                      Platinum Member
                      • Aug 2005
                      • 150

                      #11
                      Thank you Ashes for quickly replying
                      You're welcome, but your observation of physical problems with your burned media has nothing to do with the accuracy of the information on your hard drive version of the DVD.

                      Comment

                      Working...