Nero Error!! What does this log mean?

**jmet** · 3 Nov 2005, 12:18 PM

"Nero API version: 5.5.10.44"

That is a prehistoric version of Nero. I highly recommend a upgrade! You can get Nero 6 for 79.99. (Scroll Down) - http://ww2.nero.com/enu/index.html
or better yet, don't use Nero at all and burn with DVD Decrypter or ImgBurn.

**cynthia** · 3 Nov 2005, 12:59 PM

Your burner is a rebadged OEM Liteon SOHW-1693S. Think you should find a better firmware to install if you take a look into this thread:

http://club.cdfreaks.com/showthread.php?t=152205

There is also ver 5.5.10.56 that is a later version of your Nero.

Nero Software

http://www.nero.com/nero6/eng/nero-up_vor.php

Nero Platinum - 7 programmes en une suite ! ✓ Montage vidéo ✓ Streaming ✓ Sécurité des données ✓ Conversion ✓ Gravure ✓ Radio mondiale ► Plus d'informations

**Chewy** · 3 Nov 2005, 01:22 PM

5.5.10.54/56 served me very well for almost a year with my pioneer and plextor burners, hundreds of dvd's without coasters except for
new media and the required firmware flashes.
old burners/old firmware/old media

**rayrighteous** · 5 Nov 2005, 08:16 AM

What does rebadged mean. Do you mean to tell me that my Sony burner is really a Lite-on?

**blutach** · 5 Nov 2005, 08:20 AM

(Can't resist)

Rite-On.

Regards

**jm1647** · 5 Nov 2005, 10:46 AM

As cynthia pointed out the Codeguys do great work with the LiteOn's and their Sony Clones the latest for the 1693s is the "Quality Patched 1693S Firmware for 1673S, 1693S, 720A, 800A (KC3B)"

**rayrighteous** · 5 Nov 2005, 02:10 PM

I installed my firmware, and updated my Nero and now I got this message!?!

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 9/10/2003 4:10:00 AM
Nero API version: 5.5.10.56
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DW-Q28A> Version: KYS3 - HA 1 TA 1 - 5.5.10.56
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC NR-7900A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261132kB)
Free physical memory: 85MB (87068kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
4.11.2005
NeroAPI
10:00:23 PM #1 Phase 112 File APIProgress.cpp, Line 224
DVD-Video files reallocation started

10:00:23 PM #2 Phase 114 File APIProgress.cpp, Line 224
DVD-Video files reallocation completed (no file modified)

10:00:23 PM #3 Phase 111 File APIProgress.cpp, Line 224
DVD-Video files sorted

10:00:23 PM #4 Text 0 File Reader.cpp, Line 115
Reader running

10:00:23 PM #5 Text 0 File Writer.cpp, Line 125
Writer SONY DVD RW DW-Q28A running

10:00:23 PM #6 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

10:00:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

10:00:23 PM #8 Text 0 File Burncd.cpp, Line 3773
Turn on Disc-At-Once, using DVD media

10:00:23 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1813072 (1813072) = #1813072/402:54.22
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

10:00:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 1813071 (402:54.21)

10:00:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

10:00:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

10:00:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder SONY DVD RW DW-Q28A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -581488640

10:00:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1813072 (1813072) = #1813072/402:54.22
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813072 blocks [SONY DVD RW DW-Q28A ]
--------------------------------------------------------------

10:00:25 PM #15 Phase 24 File APIProgress.cpp, Line 224
Caching of files started

10:00:25 PM #16 Phase 25 File APIProgress.cpp, Line 224
Caching of files completed

10:00:25 PM #17 Phase 36 File APIProgress.cpp, Line 224
Burn process started at 6x (8,310 KB/s)

10:00:25 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

10:00:25 PM #19 Text 0 File DVDR.cpp, Line 1323
Recording mode: Sequential Recording Mode

10:00:25 PM #20 Text 0 File Mmc.cpp, Line 19546
Set BUFE: Power-Burn -> ON , Generic write control : ON

10:00:25 PM #21 Text 0 File DVDR.cpp, Line 1437
Start write address at LBA 0
DVD high compatibility mode: Yes

10:00:25 PM #22 Text 0 File Cdrdrv.cpp, Line 7933
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:01:02 PM #23 Text 0 File Writer.cpp, Line 316
22:01:02.824 - SONY DVD RW DW-Q28A : Queue again later (Intervall : 7msec)

10:03:54 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1447
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01AA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0xE5 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

10:03:54 PM #25 DVDR -1135 File Writer.cpp, Line 333
Write error

10:03:54 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

10:03:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

10:04:04 PM #28 Phase 38 File APIProgress.cpp, Line 224
Burn process failed at 6x (8,310 KB/s)

10:04:04 PM #29 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.84 , size=24576 bytes, created 5/13/2004 9:43:22 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/22/2005 11:00:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.03a, size=20512 bytes, created 6/16/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**cynthia** · 5 Nov 2005, 02:34 PM

You have the Nec and the Sony on the same cable attached to your PC.

Do you know how they are set in the back of the burner switch? Connected as Master/Slave/cable select. Either you should have the Nec as master (attached to the end of the cable) and the Sony as slave or both set as cable select.

**2COOL** · 5 Nov 2005, 03:27 PM

Originally Posted by rayrighteous

CdRomPeripheral : _NEC NR-7900A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 1 DMA: On

atapi Port 0 = Primary IDE
atapi Port 1 = Secondary IDE
ID 0 = device 0 (master)
ID 1 = device 1 (slave)

with the above mentioned...

NEC is on Secondary IDE and master
Sony is on Secondary IDE and slave

**2COOL** · 5 Nov 2005, 03:42 PM

Recorder: Version: KYS3 - HA 1 TA 1 - 5.5.10.56

Nero supposed to detect what your Recoder (burner) is and doesn't even display it here. According to firmware version KYS3, it supposed to be your Sony burner.

Originally Posted by rayrighteous

Nero API version: 5.5.10.56

Nero software is really old. Needs to be updated. http://www.nero.com/en/Updates.html

Do this and see if you are having other problems. If so, post another log.

**cynthia** · 5 Nov 2005, 03:44 PM

Just curious if the switch in the back of the burner can override this and cause the problems even if it looks like it's set up right.

**jm1647** · 5 Nov 2005, 03:48 PM

Did you burn from within DVD Shrink or with Nero itself? If from Nero itself what did the buffers look like? What else are you doing/have running when you go to burn? There is a 10% less memory available in your second log than in the first and only 85MB free.

**cynthia** · 5 Nov 2005, 04:52 PM

I did search on that error code and the only valid post that seems to have helped (the thread was in french) sounded to be to check the hardware swich in the back of the devices.

**rayrighteous** · 5 Nov 2005, 06:46 PM

I use the nero within DVD Shrink. I am fairly new to this so I don't know anything about switches, but I also have an HP DVD Writer 420e and the same message attend to appear. I make sure everything is closed when I burn. Do you think that something may be wrong with the Hardrive, or could it be both of my burners.

Nero Error!! What does this log mean?

Nero Error!! What does this log mean?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment