Help with Nero 6

**Chewy** · 6 Dec 2005, 02:40 AM

congrats on finding that crossflash, it's gone as far as I know now.
still so old the media codes are out of date
your's is not identifying the media right, must be firmware(2004-07-29)
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
probably causing problems, shouldn't be there,
probably hitched a ride with these which should not be there either
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)

sonic or veritas software???

many problems

**Dr Klovernutz** · 6 Dec 2005, 03:46 AM

what??

how do i fix this
why all of a sudden is this causing problems?

Also i just re-burned the DVD and it said it was successful, THEN it started verifying the data?? (i didn't have that checked)
so i stopped it and it said the burn failed (although i think that just refers to the verification)

what do i do?
here is the log from the second burn
fffff
ffff
1A23-3157-9030-4102-5778-2095

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 104MB (107092kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2005
UDF/ISO compilation
12:26:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

12:26:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

12:26:55 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

12:26:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

12:26:56 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

12:26:56 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running

12:26:56 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:26:56 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:26:56 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:26:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

12:26:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:26:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R

12:26:57 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:26:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

12:26:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

12:26:57 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:26:57 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

12:26:57 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:26:57 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

12:26:57 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:26:57 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C280600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

12:26:57 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

12:41:02 PM #23 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

12:41:02 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:41:20 PM #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)

12:41:20 PM #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

12:41:37 PM #27 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Dr Klovernutz** · 6 Dec 2005, 04:32 AM

now i just burned a dvd with no problems??
very confused, please help

**blutach** · 6 Dec 2005, 06:59 AM

Sounds like you either have a bad batch of media, or the burner's finally on it's last legs. See how it goes.

Look at **037200 here.

Regards

**Dr Klovernutz** · 6 Dec 2005, 09:13 AM

I went to the link you suggested and looked up my error which is
Session fixation error writing lead-out
it claims that either the disc is dirty/ scratch etc or DMA settings
I checked my DMA settings here is what ihave is this correct?

Primary Device:
Device 0: Auto Detection, DMA if avaliable, Ultra DMA Mode 5
Device 1: Auto Detection, DMA if avaliable, Not Applicable

Secondary Device:
Device 0: Auto Detection, DMA if avaliable, Ultra DMA Mode 2
Device 1: Auto Detection, DMA if avaliable, Ultra DMA Mode 2

is this ok? if not what and how do i change it? (these are the same settings I have always used though)

Help with Nero 6

Help with Nero 6

Comment

Comment

Comment

Comment

Comment