Newbie question about Nero 7

[rickz96]

I have been trying to burn a disk from a avi file which I have converted to dvd, I start shrink and it goes through the process...then nero comes in and it attempts to burn, however it bombs out and here is the error log....any help would be greatly appreciated.



Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 2
Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE1008 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654812kB)
Free physical memory: 417MB (427548kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.12.2005
NeroAPI
10:42:52 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

10:42:52 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

10:42:53 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

10:43:31 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

10:43:31 AM #5 Text 0 File Reader.cpp, Line 124
Reader running

10:43:31 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:43:31 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:43:31 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:43:31 AM #9 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

10:44:28 AM #10 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1502815 (333:57.40, 2935MB)

10:44:28 AM #11 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO

10:44:28 AM #12 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

10:44:28 AM #13 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

10:44:28 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1502816 (1502816) = #1502816/333:57.41
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1502816 blocks [D: DVDRW IDE1008]
--------------------------------------------------------------

10:44:28 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: DVDRW IDE1008] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3077767168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1502816 | lead-out | 1 | 0x41 | 0x00

10:44:28 AM #16 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:44:28 AM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

10:44:28 AM #18 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

10:44:28 AM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

10:44:28 AM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)

10:44:28 AM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x00b52000: Len x4000

10:44:28 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:44:28 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: F01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

10:44:52 AM #24 SPTI -1196 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x0678a000: Len x20

10:44:52 AM #25 SPTI -1196 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
CDB Data: 0x52 01 00 00 00 FF 00 00 1C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x0678a000: Len x1c

10:44:52 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

10:44:52 AM #27 CDR -1196 File ThreadedTransferInterface.cpp, Line 1799
Disc not present - tray open
D: DVDRW IDE1008

10:44:52 AM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

10:44:52 AM #29 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 4x (5,540 KB/s)

10:44:52 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

10:44:52 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======

[geno888]

Welcome to the forum.

Until now, for what I know, so don't take it as an absolute statement, the only solution to nero 7 problems is to revert to nero 6.

Try to do a two phases process.

First create an ISO file with DVD shrink, and then burn this file with nero without using shrink. Maybe this can solve your problem.

[Chewy]

update your firmware

http://www.iomagic.com/Firmware/FirmwareDownload.html

if that doesn't work(it'll get you further into the burn)
buy better media or slower

[Chewy]

when we find out your exact drive there's a new modded firmware available at

http://forum.rpc1.org/dl_firmware.php?download_id=1727

to say the least that's a problematic burner

[rickz96]

when we find out your exact drive there's a new modded firmware available at

http://forum.rpc1.org/dl_firmware.php?download_id=1727

to say the least that's a problematic burner

ahhh, I tried the iso image above. It bombed out as well. The strange thing is this burner worked great with the current disks I have. I just reloaded the machine recently and am now attempting to burn with it again, and now it doesn't seem to work. It will burn normal CD's with XP's built in software, just not dvd's as of yet with the reload of op system....

I used nero info tool and here is what it found.

[rickz96]

Looks like the link you provided has the firmware for me....at least the 054 is listed, however it's greyed out and I can't click on it. Thanks for all the quick replies...

[Chewy]

it's grayed out because they don't want anyone to use it, btc has
dropped support?

is it an iomagic? btc??

were the disks off the same spindle?

edit! you don't want the 54, it's old and probably bad.

[rickz96]

ahhh...so is it safe to assume that I could you one of the other versions? I haven't messed with this firmware stuff before.

I bought this burner so long ago. It says micro-advantage on the top of it. I just google'd it and found http://www.microadvantage.net/consum...1&view=support I'm going to apply all the firmware and software updates. I will post back when done.

[rickz96]

You da man!! The firmware upgrade worked...

Now I just have to figure out the format issue, it will play on one dvd player but not the other. I believe the one it won't play on, only reads +R... So, I will work on that. The burning portion works great. I did the iso thing first, haven't tried to use shrink directly yet, however it should work fine.

Thanks agian Chewy!!!

[Chewy]

ur welcome
we all get lucky sometime
btw good googling