Tweet
I am having major problems trying to burn some .vob files
I have selected DVD Video in nero, dragged the vob's to the correct folder but this is now the fifth time its failed to burn, it always fails at the 1% mark, i am using the same media i always have, and up until recently have not had any problems, i just tried to upgrade my firmware on my burner but still i have the same problem
This is the log from nero if anyone with a bit more knowledge can have a look i would appreciate it
Cheers
Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PHILIPS DVDR885P> Version: P2.0 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR885P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVDR885P E: CDRom4
TEAC CD-W54E G: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392692kB)
Free physical memory: 86MB (88320kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.12.2005
UDF/ISO compilation
11:38:25 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
11:38:25 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
11:38:25 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:38:26 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
11:38:26 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory
11:38:26 #6 Text 0 File Reader.cpp, Line 124
Reader running
11:38:26 #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVDR885P running
11:38:26 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:38:26 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:38:26 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
11:38:26 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278191 (506:15.66, 4449MB)
11:38:26 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
11:38:26 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVDR885P, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
11:38:26 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:38:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278192 (2278192) = #2278192/506:15.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278192 blocks [E: PHILIPS DVDR885P]
--------------------------------------------------------------
11:38:26 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVDR885P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665737216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278192 | lead-out | 1 | 0x41 | 0x00
11:38:26 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:38:27 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
11:38:27 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
11:38:27 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
11:38:27 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)
11:38:27 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:38:27 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:38:27 #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
11:38:27 #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
11:38:27 #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:38:38 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x04de0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:38:38 #28 CDR -1135 File Writer.cpp, Line 302
Write error
E: PHILIPS DVDR885P
11:38:38 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:38:39 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:38:39 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
11:38:39 #32 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
11:38:39 #33 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
11:38:39 #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
11:38:39 #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 23/10/2005 19:02:51 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 02:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have selected DVD Video in nero, dragged the vob's to the correct folder but this is now the fifth time its failed to burn, it always fails at the 1% mark, i am using the same media i always have, and up until recently have not had any problems, i just tried to upgrade my firmware on my burner but still i have the same problem
This is the log from nero if anyone with a bit more knowledge can have a look i would appreciate it
Cheers
Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PHILIPS DVDR885P> Version: P2.0 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR885P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVDR885P E: CDRom4
TEAC CD-W54E G: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392692kB)
Free physical memory: 86MB (88320kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.12.2005
UDF/ISO compilation
11:38:25 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
11:38:25 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
11:38:25 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:38:26 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
11:38:26 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory
11:38:26 #6 Text 0 File Reader.cpp, Line 124
Reader running
11:38:26 #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVDR885P running
11:38:26 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:38:26 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
11:38:26 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
11:38:26 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278191 (506:15.66, 4449MB)
11:38:26 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
11:38:26 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVDR885P, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
11:38:26 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:38:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278192 (2278192) = #2278192/506:15.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278192 blocks [E: PHILIPS DVDR885P]
--------------------------------------------------------------
11:38:26 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVDR885P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665737216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278192 | lead-out | 1 | 0x41 | 0x00
11:38:26 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:38:27 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
11:38:27 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
11:38:27 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
11:38:27 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)
11:38:27 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:38:27 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:38:27 #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
11:38:27 #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
11:38:27 #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:38:38 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x04de0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:38:38 #28 CDR -1135 File Writer.cpp, Line 302
Write error
E: PHILIPS DVDR885P
11:38:38 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:38:39 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:38:39 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03
11:38:39 #32 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
11:38:39 #33 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
11:38:39 #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVDR885P
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
11:38:39 #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 23/10/2005 19:02:51 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 02:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Comment