Help with burning problem

**techreactor** · 3 Jan 2006, 08:17 PM

the two things which i could immediately notice is DMA is OFF and high memory usage, correct those. Search forum for guides on activating DMA.

But thats only for faster speeds, lemme see if I can catch something else for your burn problem

Aha!, although I dont work with Nero, but I know InCD can cause problems, remove it and on the Nero site you will also find a cleaner tool to zap it completely, use that and check again.

**Chewy** · 3 Jan 2006, 08:45 PM

Madmike,
ever hear of the straw that broke the camel's back?
First you need to understand you have several issues to fix,
and the fact that you burned a lot of disks is irrelevant.
Not fixing each and every one of them is just an accident waiting to happen.

and tech nailed most of them

the media looks good, where was it made?

**Madmike** · 4 Jan 2006, 09:22 AM

Ok I have exterminated InCD but to no avail. I have made most of the adjustments needed and will try again. How do I fix the memory problem though?

Chewy I am unsure of the media's origin. I believe in Australia.

**Chewy** · 4 Jan 2006, 09:39 AM

madmike from thunderdome,
lower the burn speed to 4x at first,

How to free up some system resources or system memory in XP - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=56373&highlight=msconfig

Talk about everything else not included in other sub-forums

also there could be an issue with your nvidia ide drivers

**Madmike** · 4 Jan 2006, 05:08 PM

Ok...I have done everything as advised. I have hopefully corrected the Memory, DMA, and deleted InCD issues but to no avail.

I tried another burn and set the speed to 2.4x which was the closest I had to 4x but it still failed with another error type as well as the original one I had.

What is the issue with the Nvidia driver?

The error log is attached as it was too big to put in the thread.

Attached Files

Log5.txt (18.8 KB, 1525 views)

**jmet** · 4 Jan 2006, 05:54 PM

"Burn process failed at 16x (22,160 KB/s)"

Slow your burn down to 2X or 4X.

**Madmike** · 4 Jan 2006, 06:20 PM

I have just tried a burn at 6X which is the slowest speed that it would let me select, but still had the same problem.

I am just starting to wonder about Chewy's comment on the Nvidia driver.

Below is the burn log.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.37 - HA 5 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 5
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVD-RW DVR-110D>Version: 1.37 - HA 5 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 5
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-88JHC0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-110D D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 92MB (95172kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.1.2006
UDF/ISO compilation
6:15:41 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started

6:15:41 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)

6:15:41 PM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

6:15:41 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted

6:15:41 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

6:15:41 PM #6 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-110D running

6:15:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:15:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:15:41 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

6:15:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

6:15:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

6:15:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD+R
Disc Manufacturer ID: TDK, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

6:15:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:15:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

6:15:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

6:15:43 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

6:15:44 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

6:15:44 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

6:15:44 PM #19 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 6x (8,310 KB/s)

6:15:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:15:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: TDK.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 54 44 4B 00 00 - 00 00 00 30 30 33 00 38 ...TDK.....003.8
23 54 37 12 02 4A 73 02 - 9C 6E 15 15 0B 0B 08 08 #T7..Js..n......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

6:15:44 PM #22 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 9:33,448 (573448ms) -> OK

6:15:44 PM #23 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

6:15:46 PM #24 Text 0 File Cdrdrv.cpp, Line 1297
18:15:46.984 - PIONEER DVD-RW DVR-110D\H5 T0 : Queue again later

6:16:20 PM #25 SCSI -1064 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x0A500000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

6:16:20 PM #26 CDR -1064 File Writer.cpp, Line 304
Invalid block address

6:16:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:16:20 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:16:20 PM #29 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders

6:16:20 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:16:20 PM #31 Phase 129 File dlgbrnst.cpp, Line 1855
Generating DVD borders completed successfully

6:16:20 PM #32 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:16:20 PM #33 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 6x (8,310 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 3:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**jmet** · 4 Jan 2006, 06:34 PM

"Physical memory : 511MB (523760kB)
Free physical memory: 92MB (95172kB)
Memory in use : 81 %"

Free up some system resources - http://forum.digital-digest.com/showthread.php?t=56373

**Madmike** · 4 Jan 2006, 06:53 PM

Ok I have got rid of some more start up programs with the same error coming up when the burn failed.

Below is the memory status now -

Physical memory : 511MB (523760kB)
Free physical memory: 206MB (211172kB)
Memory in use : 59 %

**Chewy** · 4 Jan 2006, 07:05 PM

I am just starting to wonder about Chewy's comment on the Nvidia driver.

in the majority of cases where people have burning issues and this

Adapter driver: <NVATABUS>HA 0

shows up, I suspect it as one cause.

Your next logs don't show it.

Let's slow down a little and get our ducks lined up,
download and install the update nero package 1(or reinstall)
neros acting hosed

Nero Upgrade Center

http://www.nero.com/nero6/enu/nero-up.php

Nero Upgrade Center - Comparez nos produits Nero ! Mise à niveau vers la dernière version ✓ Aperçu de tous les produits Nero ✓ Caractéristiques ►Mise à niveau maintenant !

now explain how you are using nero to burn, specifically

**Madmike** · 4 Jan 2006, 08:09 PM

Ok I have updated Nero.

I usually use DVD Shrink to back up and burn the copy through Nero as DVD Shrink selects.

I have a few files that I have backed up previously through DVD Shrink, so I open Nero, select 'Burn DVD File's', then select the backed up folder and click on next which takes you to the burn window. I then select the closest speed which is 6X and then click to burn.

**Chewy** · 4 Jan 2006, 08:15 PM

load a tdk blank into the burner and see what nero shows for available burn speeds now

Attached Files

neroexpressburnspeed.PNG (43.3 KB, 308 views)

**Madmike** · 4 Jan 2006, 08:23 PM

Nero tells me that the write speeds are 6X, 8X, 12X & 16X.

**Chewy** · 4 Jan 2006, 08:32 PM

probably a pioneer issue(thing), but coupled with low memory
and possible driver corruption might be killing the burns.

Did you implement any of jmet's guide on msconfig?

before wasting anymore blanks, I would make sure to close all open
applications, shutdown any extras next to the clock and speaker icon,
even kill the quick launch taskbar, and try a burn at 8x and let nero alone.

Help with burning problem

Help with burning problem

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment