Problems with sony dvd-r

[computerguy906]

First off this is the first time i have ever had a problem with any type of media. I hove used sonys before without any problem. What I am doing is I made a picture slide show with proshow and wanted to burn it to a dvd for some friends and this is what i get using nero.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TDK DVDRW0404N >Version: 1.0C - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TDK DVDRW0404N D: CDRom0
HL-DT-ST RW/DVD GCC-4480B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 589MB (603608kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.1.2006
Burn DVD Image
2:20:19 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

2:20:19 AM #2 Text 0 File Reader.cpp, Line 124
Reader running

2:20:19 AM #3 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

2:20:47 AM #4 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 184949 ( 41:05.74, 361MB)

2:20:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

2:20:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

2:20:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

2:20:47 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 184950 (184950) = #184950/41:6.0
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 184950 blocks [D: TDK DVDRW0404N]
--------------------------------------------------------------

2:20:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 378777600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
184950 | lead-out | 1 | 0x41 | 0x00

2:20:47 AM #10 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:20:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

2:20:47 AM #12 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

2:20:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

2:20:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)

2:20:47 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:20:47 AM #16 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

2:20:47 AM #17 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON

2:20:47 AM #18 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

2:20:47 AM #19 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:20:47 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 02 D2 80 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

2:20:47 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
Illegal disc
D: TDK DVDRW0404N

2:20:47 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

2:20:48 AM #23 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 1/6/2006 11:52:42 AM (Prassi/Veritas driver for win 2K)

Please Help. The burn worked fine with some older media so are these sony disk useless for me?

[Chewy]

I don't think you'll ever get a june 2005 media to work with a sept 2004 firmware. The disks are too new, the burner is too old.

[computerguy906]

That suck i have about 100 of these disk!!!

Thanks for the help

[Chewy]

the sony 8x, fuji 8x, maxell 8x made in japan might be your best bet
I would just buy a new burner. Yours is an OEM NEC ND-1300A

[Chewy]

That suck i have about 100 of these disk!!!

Thanks for the help

those disks are worth a lot more than your burner

[computerguy906]

Got them for $30

What would be a good drive for not too much

[Chewy]

let me dump some firmwares and see what supports that media

[Chewy]

SONY16D1 16x,12x,8x,6x,4x,2x

nec 3550a stock firmware 1.05 bingo

newegg

[Chewy]

and this is why I like nec

Media Code Speed Edit V 1.0.8.1
------------------------------------------

Firmware: NEC DVD_RW ND-3550A 1.0505093000
Bootcode:
------------------------------------------

Overall supported media types: 667
------------------------------------------
DVD+R9 supported media types: 12
DVD+R supported media types: 169
DVD+RW supported media types: 32
DVD-R9 supported media types: 3
DVD-R supported media types: 401
DVD-RW supported media types: 43
DVD-RAM supported media types: 7
------------------------------------------

[computerguy906]

Thanks for the help.

[Chewy]

when I searched that media I only found 2 people who had used it!
Both had good results with newer burners

[computerguy906]

Would it matter if it is an oem drive or not

[Chewy]

the newer nec 1300(2004) firmware didn't support your media either.
Planned obsolesence?

A good rule of thumb is never buy 16x media for an 4 or 8x burner

[Chewy]

btw nero 7 is awful, 6.6.xxx18 is the best version

[computerguy906]

Ok thanks. Decided to by the new nec. Needed something better anyway. Thanks for the advice about nero.