Nero Cd/DVD sped test results

[aLittletank]

should I be concerned about this? I have tested my last 6 burns and had smooth lines. BTW this disc did test @100% for the scan disc


FYI
this is a Taiyo Yuden disc http://www.supermediastore.com/taiyo...d-r-media.html

burned with a NEC 3550a

thanks

[NightTran]

you need to do a disc quality scan at 5x after you burn the disc then see how good the quality is first

[geno888]

TYG02 is a 8x media. I obtained very good results burning these media also @12x, but anyway what speed do you burned this disc?

Do you have a liteon or a benq burner to do a scan of this disc? Nec drives are not completely reliable for scannings. Do you have a friend with a liteon or a benq drive to ask for a scan?

Remember: if you do a scan with a liteon drive, scan @4x, whereas with a benq do scans @8x.

Another question: is it your drive connected internally to IDE channel or with usb2/firewire on an external box?

[codajohn]

I was looking through the http://www.supermediastore.com/index.html site. How are their media prices compared to retail? Are they reputable? Are there other reputable on-line media stores that you could recommend? Compared to CompUSA their prices are insanely low. Is this to good to be true? I may never go back there again. Ever!
CJ

[Chewy]

use the free shipping or specials, there TY dvd+r prices are too high,
but they beat or match everyone on the TY dvd-r's

retail MIJ or verbatim for 30C is hard to beat(shop the sales)

[codajohn]

Thanks Chewy!

[aLittletank]

TYG02 is a 8x media. I obtained very good results burning these media also @12x, but anyway what speed do you burned this disc?

I have been doing my burns @ 4x

Do you have a liteon or a benq burner to do a scan of this disc?

I have a sony DQ-28A and a NEC 3550a

Nec drives are not completely reliable for scannings. Do you have a friend with a liteon or a benq drive to ask for a scan?

My friends are lucky to burn a CD, let alone a DVD! nope, no liteon or Benq

Another question: is it your drive connected internally to IDE channel or with usb2/firewire on an external box?

Internally


Lets just for the sake of this post assume that the scan was correct... should I be concerned with the reading at 3.4 until the end of the disk?


thanks

[Chewy]

Lets just for the sake of this post assume that the scan was correct... should I be concerned with the reading at 3.4 until the end of the disk?

a little, especially if the whole batch has those problems, crosscheck with the sony

also my scan of cloned/fake TY

a worst disk

http://forum.digital-digest.com/showthread.php?t=63461

[aLittletank]

a little, especially if the whole batch has those problems, crosscheck with the sony

only bad one so far, I will do that cross check and see if its any different

Thanks