Tweet
I attempted to change the bit set from dvd+ to dvd rom, with imgburn and it would not do it, there was also a message that there is a maximum of 500 changes allowed is this correct? My firmware is 1.05.
-
If you use these forums you will not have to face that...
Long Live Foamy!!!
My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S. -
How do you know it wouldn't set it? -
because i got a message that said failure then it still said 500 changes left.... If you use these forums you will not have to face that...
Long Live Foamy!!!
My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S.Comment
-
confirm with cdspeed and disc info tab, should show status of burned disk.
post an imgburn logComment
-
ImgBurn says DVD+R by deault when you change the booktype. Chances are the disc is actually booktyped to "DVD-ROM".Originally Posted by dmansheadComment
-
The NEC 3550 will not do bitsetting without Liggys and Dees firmware for the burner.My firmware is 1.05.
Get Version 1Y6 here (Pick the RPC1 firmware!). You need this firmware to do bitsetting!Gary D
Need Answers, 4 Easy Steps: {1st=Search}, {2nd=Register}, {3rd=Read the Rules}, {4th=Ask the Question}
Windows XP: {How to free up some system resources or system memory in XP}, {Power User Setup for Windows XP}
Comment
-
forgotten that, it was riplock that nec removed
chewy DuH good call gary, very goodComment
-
Thanks Chewy!Gary D
Need Answers, 4 Easy Steps: {1st=Search}, {2nd=Register}, {3rd=Read the Rules}, {4th=Ask the Question}
Windows XP: {How to free up some system resources or system memory in XP}, {Power User Setup for Windows XP}
Comment
-
I always have the newest L&D's firmware downloaded before I get the driveComment
-
yes i was going to flash this later, had to work doing inventory today, but it is done for another yr. got out early getting to my jungle of a lawn then taking apart the machine to flash my NEC in safe mode on master alone. heres the log and some scans to look at while I'm away.
Why such a difference in the scans from the nec to my liteon? shoudn't they show a similar pattern? If you use these forums you will not have to face that...
Long Live Foamy!!!
My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S.Comment
-
well they do, the rogue spike you can ignore in the liteon scan, the liteonshoudn't they show a similar pattern
corrects a lot of smaller stuff the nec doesn't handle well. The liteon is considered a better scanner, have you scanned the same disk at different speeds with the nec? Some do better at 5x some 8x some 16x?
NEC burns better, liteon scans and reads better. Compare premium media and the differences are less, ignore pie's with nec, always bad.Comment
-
ok so I got dee's 1Y6 firmware, when I changed it with imgburn it said said sucess and gave me 499 times more to change it. What happens if I hit zero? Is there a way to reset the counter? Maybe by 500 burns we should look for a new burner? If you use these forums you will not have to face that...
Long Live Foamy!!!
My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S.Comment
-
well when you get close just use liggy's binflash tool and reset back to 500Comment
-
I think thats how many times you can change the booktype,,(DVD+R DL toOriginally Posted by dmanshead
DVD-ROM or DVD+R to DVD-ROM)not how many burns you can do,
and once changed you should never have to change it again..
right??? wrong???She's going down to the devil, down down to 90 degrees.
Rock on bro!!!!
_________________________________________________
Down load DVDFab Decrypter:Here
Down load shrink 3.2.0.15: Here
DVD Decrypter 3.5.4.0: Here
Down load VoBblanker: Here
Down load ImgBurn: Here
Down load RipIt4Me: Here
RipIt4Me guide: HereComment
-
never thought about it but you must be right since the counter is supposed to protect the eprom, when you set it(bitsetting), the programs have to write to it.right??? wrong???
I guess they just check later or the drive reports to the program.
Means a lot of drives which don't remember get set a bunch.Comment
Comment