Burning problems with a D5 dvd

[brandonboucher]

Hi i can rip any dvd perfectly its the burning that always bites me in the ass. Everytime it burn any dvd it burns and says its 100% complete rite. so when you look at the dvd you can see a 1/2 inch dark line, then its white for another half inch then dark. Like the burning stoped righting the dvd for a minute and then started again. This always happens on any dvd burning software that i got. and i really need help because i dont know what to do. Thank you!!

[soup]

Welcome to the Forum. Let us know the process you use to get to the burning stage & what you are burning with? What also would be really good is to see a recent burn log?

[brandonboucher]

??1

Im using dvd shrink and i dont know were the burn logs are???

[soup]

What are you using to burn? Are you using Nero automatically through Dvd Shrink? What did you use to rip to your hard drive?

[brandonboucher]

umm the dvd shrink program, dont mind my stupidness, the dvd im using is a "playo" 4.7 GB 8x dvd.

[soup]

It is nothing to do with stupidness, everybody starts from the beginning. Look in your program files / Ahead / Nero & see if you see the word History then post back.

[brandonboucher]

How do i put files on here i clicked and pasted the information in the text document but it was to long???? oh wait ill use rapidshare!!http://rapidshare.de/files/33399607/NeroHistory.log

[soup]

You only need to post the bottom one. Nero when you burn just keeps adding to that file so just post the last one.

How to post your Nero Log.

[brandonboucher]

BrandonB

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 8:41:48 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:04 AM
Nero version: 6.3.0.6 (Nero Express)
Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 6.3.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 102C - HA 1 TA 0 - 6.3.0.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST960822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6650A D: CDRom0
Generic DVD-ROM E: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1015MB (1039740kB)
Free physical memory: 533MB (546596kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.1.2006
CD-ROM (ISO)
1:47:37 PM #1 Text 0 File Isodoc.cpp, Line 6035
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:47:37 PM #2 Phase 75 File dlgbrnst.cpp, Line 1802
JustLink activated

1:47:37 PM #3 Text 0 File Reader.cpp, Line 118
Reader running

1:47:37 PM #4 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD+-RW ND-6650A running

1:47:37 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

1:47:37 PM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

1:47:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 354005 ( 78:42.05)

1:47:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

1:47:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 2100
Recorder: _NEC DVD+-RW ND-6650A;
CDR code: 00 97 17 09; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 40 A0, 2: 61 11 09 (LI 97:17.09), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

1:47:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:47:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 809
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 354006 (354006) = #354006/78:40.6
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 354004 blocks [_NEC DVD+-RW ND-6650A]
--------------------------------------------------------------

1:47:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 978
Prepare recorder [_NEC DVD+-RW ND-6650A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 725311488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
354006 | lead-out | 1 | 0x00 | 0x41

1:47:37 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Removed 2 run-out blocks from end of track 1. Length: 354006 -> 354004.

1:47:37 PM #14 Phase 24 File dlgbrnst.cpp, Line 1802
Caching of files started

1:47:37 PM #15 Text 0 File Burncd.cpp, Line 4108
Cache writing successful.

1:47:37 PM #16 Phase 25 File dlgbrnst.cpp, Line 1802
Caching of files completed

1:47:37 PM #17 Phase 36 File dlgbrnst.cpp, Line 1802
Burn process started at 24x (3,600 KB/s)

1:47:38 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2294
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:47:38 PM #19 Text 0 File Mmc.cpp, Line 19734
Set BUFE: JustLink -> ON

1:52:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:52:14 PM #21 Text 0 File Mmc.cpp, Line 14588
<_NEC DVD+-RW ND-6650A> start Close Session

1:52:45 PM #22 Phase 37 File dlgbrnst.cpp, Line 1802
Burn process completed successfully at 24x (3,600 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 8:41:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 12:12:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 8:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[Dialysis1]

This log is for a CD.

[blutach]

This appearas less like a RipIt4Me Bug Report than a burning problem. Please post these issues in Blank Media and Burning forum in the future.

Thread transferred.

Regards