ripit runs but burn not successful

[o8secridr]

i run ripit4me1.4.15.4 it runs opens dvd decoder. then runs fixvts1.5 then the dvd shrink starts. it analyzes and encodes ok then when it is ready burn it goes to about 3% burn and crashes. says burn not successful. am i doing something wrong? this is my first time using it and it hasnt worked yet. i have tried both wizard mode and 1 click mode. very confusing to me why it is not working.

[jamoskeag3]

What dvd.
Can you post logs.

[o8secridr]

it was Stick It that i tried to burn. have been using dvdxcopy or just dvd shrink but will not burn some movies. as i said this is the first time i have tried this program and not quite sure where to get the logs. have tried 4 times and same results

[blutach]

Logs are either in your ripping folder or you have saved them. From RipIt4Me: Logs/Settings menu.

It sound more like a burning issue than a ripping one.

Read and implement the Golden Rules of Burning.

Thread transferred to Blank Media and Burning forum.

Regards

[o8secridr]

is this what you are looking for?



I 03:34:05: RipIt4Me Version 1.4.15.4
I 03:34:05: Starting Wizard at 03:34:05
I 03:34:05: Running Windows XP Service Pack 1
I 03:34:05: Your FixVTS path points to , but it should point to FixVTS.exe
I 03:34:14: DVD Decrypter version: 3.5.4.0
I 03:34:14: DVD Shrink version 3.2.0.15
I 03:34:14:
I 03:34:14: Ripping mode: Full Rip
I 03:34:14: Main title(s):
I 03:34:14: Title 18 (VTS 7 PGCs 1) -- 1:43:04s -- 16:9
I 03:34:14: Remove Protected Cells = on
I 03:34:14: Remove Tiny Cells = on
I 03:34:14: Remove Useless Menu Cells = on
I 03:34:14: Remove Last VTS = on
I 03:34:14: Blank bogus VTS = on
I 03:34:14: Run FixVTS on full DVD = on
I 03:34:14: Rip JACKET_P folder = off
I 03:34:14: Copying original IFOs into target directory
I 03:34:16: 14 IFOs copied.
I 03:34:16:
I 03:34:16: Wizard Step 2: PSL file creation
I 03:36:20: DVD Volume Label: ITT0NNW1
I 03:36:20: Loading IFOs
I 03:36:20: Region code: 1
I 03:36:20: Done opening IFOs
I 03:36:20: Retrieving sectors from DVD drive
I 03:36:23: CRC32 value = 0x5365A750
I 03:36:23: Creating Protected Sector List (PSL) file
I 03:36:23: Done creating PSL file
I 03:36:23:
I 03:36:23: Wizard Step 3: Ripping DVD
I 03:37:31: Starting DVD Decrypter
I 03:37:31: Waiting for Decrypter to be ready
I 03:37:37: Done importing the PSL file, now starting ripping...
I 04:37:11: Done ripping ...
I 04:37:11: Decrypter ripping time: 00:59:40
I 04:37:11:
I 04:37:11: Wizard Step 3B: Optional cleanup
I 04:37:45: Loading IFOs
I 04:37:45: DVD is region-free
I 04:37:47: Scanning VTS 1 for BOVs
I 04:37:55: Scanning VTS 2 for BOVs
I 04:37:55: Scanning VTS 3 for BOVs
I 04:37:55: Scanning VTS 4 for BOVs
I 04:37:55: Scanning VTS 5 for BOVs
I 04:37:55: Scanning VTS 6 for BOVs
I 04:37:55: Scanning VTS 7 for BOVs
I 04:37:55: Scanning VTS 8 for BOVs
I 04:37:55: Scanning VTS 9 for BOVs
I 04:37:55: Scanning VTS 10 for BOVs
I 04:38:00: Scanning VTS 11 for BOVs
I 04:38:00: Scanning VTS 12 for BOVs
I 04:38:00: Scanning VTS 13 for BOVs
I 04:38:02: Scanning DVD Decrypter log for protected cells
I 04:38:02: VTS 7 PGC 1 Cell 2 is protected
I 04:38:02: Found 1 protected cell
I 04:38:02: Analysing DVD structure
I 04:38:02: MD = 400
I 04:38:02: MV = 4000
I 04:38:03: BOR = 1
I 04:38:03: BON = 1
I 04:38:03: REB = 1
I 04:38:03: BOS = 1
I 04:38:04:
I 04:38:04:
I 04:38:04: Analysis done
I 04:38:04: Checking for potential read-errors caused by scratches on the disc.
I 04:38:04: No abnormal read-error detected.
I 04:38:04: Removing protected cells and cleaning up cell commands
I 04:38:04: VMGM LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 1 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 2 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 2 LU1 PGC 2 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 2 LU1 PGC 4 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 3 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 4 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 5 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 6 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTS 7 PGC 1 Cell 4 removed (protected or tiny) -- Duration 0 s.
I 04:38:04: VTS 7 PGC 1 Cell 3 removed (protected or tiny) -- Duration 0 s.
I 04:38:04: VTS 7 PGC 1 Cell 2 removed (protected or tiny) -- Duration 0 s.
I 04:38:04: VTS 7 PGC 1 Cell 1 removed (protected or tiny) -- Duration 0 s.
I 04:38:04: VTSM 7 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 7 LU1 PGC 2 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 8 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 9 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 10 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 11 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 12 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: VTSM 13 LU1 PGC 1 Cell 1 removed (useless) -- Duration 0 s.
I 04:38:04: Looking for bogus VTS
I 04:38:04: No bogus VTS found
I 04:38:04: VTS 2 is completely useless. It will be blanked
I 04:38:04: VTS 5 is completely useless. It will be blanked
I 04:38:04: Blanking VTS 2
I 04:38:04: Blanking VTS 5
I 04:38:04:
I 04:38:04: Wizard Step 4: FixVTS
I 04:38:09: Starting DVD Shrink
I 04:38:21: Running FixVTS to cleanup DVD
I 04:38:22: FixVTS version: 1.5.0.0 -- All OK
I 04:38:22: DVD is protected: Running FixVTS on the full DVD
I 07:49:13: Starting DVD Shrink
I 10:11:00: Done!

[blutach]

It's definitely a burn issue.

Post your Ner0 log. It is in C:\Program Files\Ahead\Nero\NeroHistory.log (if you have Ner0 7 it's in C:\Program Files\Nero\Nero7\Core\NeroHistory.log)

And read and implement the Golden Rules of Burning.

Regards

[o8secridr]

if im using a dvd shrink is that still nero?

[blutach]

Yes.

Regards

[blutach]

I 04:38:22: DVD is protected: Running FixVTS on the full DVD
I 07:49:13: Starting DVD Shrink
I 10:11:00: Done!

I am a little concerned here. Did it really take 3 hours to run FixVTS? Or did you go away from the macine for a bit.

I guess then you had RipIt4Me in the background while DVD Shrink did its shrinking for next 3 hours?

Regards

[Gary D]

I am a little concerned here. Did it really take 3 hours to run FixVTS? Or did you go away from the macine for a bit.

I guess then you had RipIt4Me in the background while DVD Shrink did its shrinking for next 3 hours?

Regards

The user was using the wizard mode not one click. The log reports the actual time for the user to click to go from step to step and finally hit finished after shrink.

[o8secridr]

i dont have nero7 i found the log but it is very long not sure what you are looking for

[Gary D]

Here is a FAQ on how to post a Nero Log: LINK

[o8secridr]

i did leave ripit up in background on all but one occasion. i tried several times i believe that log is from the last try and i did do it in wizard mode. it didnt take long for fixvts but usually does take awhile for my shrink to encode.

[o8secridr]

====== *** NeroAPI, History File *** ======
Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
Nero API version: 6.6.0.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 15d

Recorder: <HP DVD Writer 740b> Version: DC24 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : ST3120025A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 740b atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HP DVD Writer 740b E: CDRom0
SAMSUNG CD-R/RW SW-248F F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458096kB)
Free physical memory: 102MB (105020kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.10.2006
NeroAPI
10:08:05 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

10:08:05 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

10:08:05 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

10:08:06 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

10:08:06 PM #5 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running

10:08:06 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:08:06 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:08:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:08:06 PM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

10:08:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 2286095 (508:01.20, 4465MB)

10:08:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO

10:08:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: HP DVD Writer 740b, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

10:08:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:08:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [HP DVD Writer 740b]
--------------------------------------------------------------

10:08:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00

10:08:07 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

10:08:07 PM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

10:08:07 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

10:08:07 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2x (2,770 KB/s)

10:08:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:08:07 PM #21 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode

10:08:07 PM #22 Text 0 File Mmc.cpp, Line 21626
Set BUFE: Buffer underrun protection -> ON

10:08:07 PM #23 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes

10:08:07 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:00:44 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00FE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0xAA 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x02 0x00

11:00:44 PM #26 CDR -1093 File Writer.cpp, Line 311
No seek complete

11:00:44 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:00:44 PM #28 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 2271903

11:00:44 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2x (2,770 KB/s)

11:00:44 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

11:00:44 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/1/2006 5:11:06 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======

[o8secridr]

i think it actually took 2 hours to encode for some reason