OMG i'm so frustrated - Burn Error again!! Please Help

**mill** · 29 Oct 2006, 04:31 AM

Page not found · GitHub Pages

http://forum.rpc1.org/dl_firmware.php?download_id=1976

try to update firmware, and turn dma on

**mulanone** · 29 Oct 2006, 04:32 AM

Thanks, but it doesn't have my version (Version: BSG2). Any more advice? What is dma?

**Chewy** · 29 Oct 2006, 04:46 AM

you want BSG5, hopefully it will see your blanks, hope they are more
identifiable than your burner, good find mill

dma

How to check your DMA status & reset it if necessary - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=61905

Talk about everything else not included in other sub-forums

**mulanone** · 29 Oct 2006, 05:26 AM

Arghhhh! d/l'd new firmware, and followed the instructions for turning DMA on. Except I noticed that I have two Primary IDE Channels. So I clicked the second Primary IDE Channel and noticed that on Device 1, it says PIO Mode for the Current Transfer Mode. I unstalled driver, but same thing comes up. I'm posting the burn error log I just got now. HELP!!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <DVDRW DRW-3S163> Version: BSG5 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : DVDRW DRW-3S163 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
DVDRW DRW-3S163 D: CDRom0
HL-DT-ST DVD-ROM GDR8163B E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 111MB (114004kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.10.2006
NeroAPI
12:19:48 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

12:19:48 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

12:19:48 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

12:19:48 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

12:19:48 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:19:48 PM #6 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-3S163 running

12:19:48 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:19:48 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:19:48 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:19:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

12:19:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

12:19:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDRW DRW-3S163, Media type: DVD+R
Disc Manufacturer ID: MEDIA ID, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

12:19:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:19:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [DVDRW DRW-3S163]
--------------------------------------------------------------

12:19:48 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDRW DRW-3S163] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

12:19:49 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

12:19:49 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:19:49 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

12:19:49 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

12:19:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:19:49 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MEDIA.ID
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 4D 45 44 49 41 - 20 49 44 30 30 31 00 38 ...MEDIA.ID001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

12:19:49 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

12:20:43 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00CD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

12:20:43 PM #24 CDR -1106 File Writer.cpp, Line 311
Power calibration error

12:20:43 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:20:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:20:44 PM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

12:20:44 PM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

12:20:44 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

12:20:44 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

12:20:44 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**soup** · 29 Oct 2006, 05:55 AM

Did you do a restart after uninstalling?

Memory: http://forum.digital-digest.com/showthread.php?t=56373.

You might also want to give The Golden Rules a good read.

**mill** · 29 Oct 2006, 06:25 AM

4. DMA Settings

Setting DMA mode:
<TABLE width="90%" align=center><TBODY><TR><TD class=news_topic>Windows 95/98/ME Users
Right click on [My Computer] and select [Properties] from the menu. Click on [Device Manager], then click on [CD-ROM]. This will expand to show the CD drives on your system. Right click on a drive and select [Properties] from the menu. Click on the [Settings] tab and check that the [DMA] option is enabled. Repeat this procedure for the remaining CD drives.
Win NT/2000/XP Users
Right click on [My Computer] and select [Properties] from the menu. Click [Device Manager] on the [Hardware] tab, then click to open the [IDE ATA/ATAPI (hard disk) controllers] section. You will find: the Primary IDE Channel controller, Secondary IDE Channel controller. Complete the following procedure:

Right click on the Primary IDE controller and select [Properties] from the menu.
Select the [Advanced Settings] tab. Check that the [Transfer Mode] for both devices is set to [DMA if available].
Repeat this for Secondary IDE controller.

</TD></TR></TBODY></TABLE>
Note: In some cases older CD-ROM drives will not support DMA mode. In that case please set both devices to PIO mode.

**Chewy** · 29 Oct 2006, 07:16 AM

would you please identify your blank disks? what are they exactly?

**soup** · 29 Oct 2006, 07:50 AM

I guess Memorex or Kodak.

http://club.cdfreaks.com/showthread.php?t=83894.

http://club.cdfreaks.com/showthread.php?t=104161.

**mulanone** · 29 Oct 2006, 09:03 AM

Originally Posted by soup

Did you do a restart after uninstalling?

Yes I rebooted. Just tried it again and it's still not working. Once it goes into burn mode after encoding I get the burn error message. Before it would burn the entire disk then give me the burn error. I'm using TDK media.

**soup** · 29 Oct 2006, 09:23 AM

Well you can read this but right now just read it & wait on Chewy to pay a visit.

http://forum.digital-digest.com/show...43&postcount=5.

**mill** · 29 Oct 2006, 11:44 AM

It might help to see how you have your drives set up. Can you run nero info tool and post the results?

**Chewy** · 29 Oct 2006, 12:12 PM

either or
1. that media is garbage
2. the burner is dead

in this case I wouldn't be surprised if both were true?

if the media is branded tdk and another drive detects a mid code I would say the burner is toast

**mulanone** · 29 Oct 2006, 01:56 PM

InfoTool Results #1

Thanks again guys for helping me out with this. Here are the InfoTool Results. I have to split this into two messages, because the text exceeds the maximum. I hope it's just a software problem and not my burner. I'm too poor to go get another burner..

Nero InfoTool 3.02
Drive Information
------------------
Drive : DVDRW DRW-3S163
Type : DVDÂ±R/RW DL Recorder
Firmware Version : BSG5
Buffer Size : 2 MB
Date : 2005-01-11
Serial Number
Vendor Specific : 2005/01/11 10:51
Drive Letter : D:\
Location : 0:0
Mechanism : Tray
Read Speed : 48 X
Write Speed : 41 X
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4
Disc Information (D:\)
-------------------
Drive Information
------------------
Drive : HL-DT-ST DVD-ROM GDR8163B
Type : DVD-ROM Drive
Firmware Version : 0D20
Buffer Size : 256 KB
Date : ?
Serial Number
Vendor Specific : 0BDCA 04/04/16
Drive Letter : E:\
Location : 0:1
Mechanism : Tray
Read Speed : 48 X
Write Speed : n/a
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes
Write CD-R : No
Write CD-RW : No
Write DVD-R : No
Write DVD-RW : No
Write DVD-R DL : No
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Buffer Underrun Protection : No
Mount Rainier : No
Modes : n/a
Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4
Disc Information (E:\)
-------------------
Type : - no disc inserted -

Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel
Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: DVDRW DRW-3S163
Type : CD-Rom Drive
DMA : On
Autorun : On
Description : Slave: HL-DT-ST DVD-ROM GDR8163B
Type : CD-Rom Drive
DMA : Off
Autorun : On
Adapter 2
---------
Description : Secondary IDE Channel
Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: Maxtor 6Y080M0
Type : Disk Drive
DMA : On

Software Information
--------------------
Operating System : Windows XP Home Edition (5.01.2600 Service Pack 2)
DirectX : DirectX 9.0c
Description : Nero Burning ROM
Version : 6, 6, 0, 18
Company : Ahead Software AG
Version Check : Ok
Description : Nero StartSmart
Version : 2, 0, 0, 28
Company : Ahead Software AG
Description : NeroVision Express
Version : 2,1,2,9
Company : Ahead Software AG
Description : Cover Designer
Version : 2, 3, 0, 50
Company : Nero AG
Description : Nero BackItUp Application
Version : 1, 2, 0, 60
Company : Ahead Software AG

**mill** · 29 Oct 2006, 06:55 PM

I m curious why this won.t keep you dma on.
Description : Slave: HL-DT-ST DVD-ROM GDR8163B
Type : CD-Rom Drive
DMA : Off
I noticed the note on the instrution from the error code page read :

"Note: In some cases older CD-ROM drives will not support DMA mode. In that case please set both devices to PIO mode."
I know were talking about dvd burners,and dvd roms but i wonder if one being set to pio and the other one with dma on has anything to do with it,
But i would follow Chewys instructions.Sorry i cant be of more help.

OMG i'm so frustrated - Burn Error again!! Please Help

OMG i'm so frustrated - Burn Error again!! Please Help

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment