Can't write to DVD Player

[weaver4]

Has anyone else seen a problem where after they use RipIt4Me they are not able to write to the same DVD drive they ripped from? I have tried it three times with the same result, only way I have seen to fix it is to reset the computer.

I have AnyDVD installed but I alway exit it before I start RipIt4Me.

[cynthia]

What burning program do you use? Can you post a log file from that burning program?

[weaver4]

I have tried it with Nero, Ashampoo and Cheetah. It fails with all of them, it looks like it is burning but the verify fails. After I reboot my computer and check the DVD their are no files on it.

[soup]

This might give us some idea.

http://forum.digital-digest.com/showthread.php?t=57213.

[blutach]

Clearly a burning issue - transferred to Blank Media and Burning forum.

A log would assist. Read and implement the Golden Rules of Burning.

Regards

[Gary D]

Just out of curiosity, are you running the latest RI4M, version 1.5.5.0??

[weaver4]

I don't think it is really a burning issue, since it only fails when after I used RipIt. Works fine the rest of the time.

[Chewy]

after using ripit set shrink to write the compressed edited video files to a folder on your hard drive, check those files with a player(powerdvd/mpc), then burn manually with nero, post that log then

[weaver4]

Here is the error file
============================

xxx xxxxx <- My name removed

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:20:56 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0H - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-00HBB0 08.0 viasraid Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD3200SD-01KNB0 08.0 viasraid Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A F: CDRom0
LITE-ON DVDRW SOHW-1633S G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048084kB)
Free physical memory: 274MB (280888kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.11.2006
ISO compilation
5:55:04 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:55:04 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

5:55:04 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

5:55:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

5:55:04 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

5:55:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1745855 (387:58.05, 3409MB)

5:55:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

5:55:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

5:55:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:55:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1745856 (1745856) = #1745856/387:58.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1745856 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

5:55:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3575513088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1745856 | lead-out | 1 | 0x41 | 0x00

5:55:05 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

5:55:05 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

5:55:05 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

5:55:05 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

5:55:05 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:55:05 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

5:55:05 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

5:55:05 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

5:55:05 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:55:28 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
17:55:28.437 - LITE-ON DVDRW SOHW-1633S\H1 T1 : Queue again later

6:02:42 PM #22 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1745856 (1AA3C0h), lenght 0 blocks

6:02:42 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:02:42 PM #24 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1745855

6:02:58 PM #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

6:02:58 PM #26 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

6:03:02 PM #27 SectorVerify 10 File Cdrdrv.cpp, Line 9938
Sectors from 346 to 358 on disc are different to source

6:11:09 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:11:09 PM #29 SectorVerify 10 File Cdrdrv.cpp, Line 9938
Sectors from 416 to 478 on disc are different to source

6:11:09 PM #30 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 11:53:02 AM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 12/14/2005 4:07:35 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 1:53:28 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 1:53:04 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 1:53:30 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 3:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[cynthia]

Do you have AnyDVD running while you are burning?

[weaver4]

No, I do not have anydvd running.

[cynthia]

I would suggest you try to burn those ISO files with www.imgburn.com instead. Something makes the original not match the burned copy. (as it fails during the verifying stage).

[Chewy]

don't bother with nero anymore, it can't fight this mess
use imgburn till you get your computer cleaned up

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 11:53:02 AM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 2:54:28 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 12/14/2005 4:07:35 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 1:53:28 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 1:53:04 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 1:53:30 PM (InCD4 driver for win NT/2K/XP)

[weaver4]

What needs to be cleaned up? I use nero all the time without any problems, it only fails after I use RipIt4Me.

[Chewy]

Physical memory : 1023MB (1048084kB)
Free physical memory: 274MB (280888kB)
Memory in use : 73 %

that's a lot of crap running in the background


I have been using ripit with nero since it came out and no problems

ripit should have shut down by the time nero opens to burn anyway

are you making the iso with shrink?