Please review Log, still no success with this...

[lancenpam]

Please see log below and I would appreciate any help you can provide. I got an I/O error this time around. I've read the forums over and over and just don't know what I'm doing wrong.. Thanks for your time.

I 00:11:32: RipIt4Me Version 1.6.3.0
I 00:11:32: Starting Wizard at 00:11:32
I 00:11:32: Running Windows XP Service Pack 2
I 00:11:32: FixVTS version: 1.6.0.2 -- All OK
I 00:11:32: DVD Decrypter version: 3.5.4.0
I 00:11:32: DVD Shrink version 3.2.0.15
I 00:11:32: _________________________
I 00:11:32: SPTI layer available
I 00:11:32: _________________________
I 00:11:32: Ripping mode: Full Rip
I 00:11:32: Main title(s):
I 00:11:32: Title 2 (VTS 2 PGCs 1) -- 1:38:57s -- 16:9
I 00:11:32: Remove Protected Cells = on
I 00:11:32: Remove Tiny Cells = on
I 00:11:32: Remove Useless Menu Cells = on
I 00:11:32: Bypass annoying PGCs = off
I 00:11:32: Remove Last VTS = on
I 00:11:32: Blank bogus VTS = on
I 00:11:32: Run FixVTS on full DVD = on
I 00:11:32: Rip JACKET_P folder = off
I 00:11:32: Copy IFO mode = 0
I 00:11:32:
I 00:11:32: Copying original IFOs into target directory
I 00:11:34: 20 IFOs copied.
I 00:11:34:
I 00:11:34: Wizard Step 2: PSL file creation
I 00:11:37: DVD Volume Label: RV
I 00:11:37: Loading IFOs
I 00:11:37: Region code: 1
I 00:11:37: Done opening IFOs
I 00:11:37: Retrieving sectors from DVD drive
I 00:11:38: CRC32 value = 0xB3CB2496
I 00:11:38: Creating Protected Sector List (PSL) file
I 00:11:38: Done creating PSL file
I 00:11:38:
I 00:11:38: Wizard Step 3: Ripping DVD
I 00:11:44: Starting DVD Decrypter
I 00:11:44: Ripping video_ts.vob to detect unreferenced titlesets
I 00:11:44: Waiting for Decrypter to be ready
I 00:14:17: Done ripping ...
I 00:14:17: Decrypter ripping time: 00:02:33
I 00:14:17: Loading IFOs
I 00:14:17: Region code: 1
I 00:14:17: Scanning VTS 1 for BOVs
I 00:14:17: Scanning VTS 2 for BOVs
I 00:14:17: Scanning VTS 3 for BOVs
I 00:14:17: Scanning VTS 4 for BOVs
I 00:14:17: Scanning VTS 5 for BOVs
I 00:14:17: Scanning VTS 6 for BOVs
I 00:14:17: Scanning VTS 7 for BOVs
I 00:14:17: Scanning VTS 8 for BOVs
I 00:14:17: Scanning VTS 9 for BOVs
I 00:14:17: Scanning VTS 10 for BOVs
I 00:14:17: Scanning VTS 11 for BOVs
I 00:14:17: Scanning VTS 12 for BOVs
I 00:14:17: Scanning VTS 13 for BOVs
I 00:14:17: Scanning VTS 14 for BOVs
I 00:14:17: Scanning VTS 15 for BOVs
I 00:14:17: Scanning VTS 16 for BOVs
I 00:14:17: Scanning VTS 17 for BOVs
I 00:14:17: Scanning VTS 18 for BOVs
I 00:14:17: Scanning VTS 19 for BOVs
I 00:14:17: Checking once more for unreferenced titlesets...
I 00:14:17: Excluding VTS 1 from rip because it is unreferenced.
I 00:14:17: Excluding VTS 18 from rip because it is unreferenced.
I 00:14:17: Excluding VTS 19 from rip because it is unreferenced.
I 00:14:17: Waiting for Decrypter to be ready
I 00:14:24: Done ripping ...
I 00:14:24: Decrypter ripping time: 00:00:07
I 00:14:24: The rip seems to have been aborted, RipIt4Me cannot continue

[blutach]

See FAQ 22

Regards

[lancenpam]

Thanks! Thought I was going to make it this time..but...

It had error message much quicker this time.. using 1 click option and wizard option. Then I hit cancel to move on after the i/o error and imgburn sat there open and wanted me to browse for file or something. Not sure what I need to do.... Should I be in build mode? It's in write mode now. I have attached the debug logs... Thanks for your much appreciated time

Pam

[soup]

What did you save as in Dvd Shrink, hard disc folder or ISO?

[lancenpam]

That's where my confusion is....

imgburn opens (or has file paths) to dvdd, dvdshrink and the fxts program. I thought or think that imgburn will run the decrypter then since the dvdshrink path is in the preference area of imgburn that it would open shrink. That must not be the way it works? dvd shrink stops immediately if i run that first and says dvd invalid navigation or something like that. I hope this post makes sense... Thanks again

[soup]

I think you are getting just a bit confused. You use RipIt4Me to rip to your hard drive which uses Dvd Decrypter & FixVts, then launches Dvd Shrink to make your choice fit on a single layer blank disc & also you can create an ISO to burn with ImgBurn.

RipIt4Me guide

Dvd Shrink guide

[lancenpam]

A little.. perhaps...

A bit confused? I had to giggle. That would be the understatement of the year for me! Does imgburn need to be in build mode? It wants me to browse for ISO files.. .that I haven't created because it stops every time... I have read until I'm blurry eyed. It used to be so easy to do this. DVDD and Shrink and worked every time. Well, it was good while it lasted.. thanks.

[BR7]

Build mode will make your movie in iso and then you can burn it

[blutach]

You're not trying to decrypt with ImgBurn are you? It won't work.

Re-install DVD Decrypter.

Regards

[soup]

Use the RipIt4Me Installer & keep ImgBurn for your burning needs.

[lancenpam]

ALMOST worked! Pick me up off the floor....

OMG, I almost passed out when it actually worked!!!! BUT, no such luck... I uninstalled everything, everything, then reinstalled and went step by step to do the renaming process of DVDD and imgburn, etc. Started w/ripit4me, it opened dvdd, that even worked! woo...did Fixts...it even opened DVD Shrink, i changed to ISO w/imgburn, then I again was shocked and thought I was home free! Then the dreaded error message, Device IO control, device LOCKED! So, i restarted pc, tested the dvd drive, it did the spin up and played a dvd ok... started the whole process over... and got the message again when it got to that point. UGH! I updated the firmware recently (yet another post here, or somewhere)... HELP... again... Thanks, Again!

[blutach]

There is NO renaming of DVD Decrypter and ImgBurn. Don't do that.

Reinstall them again. Don't play around with DVD Decrypter's name. RipIt4Me won't find it, I am afraid.

Regards

[lancenpam]

I did what the instructions said...here...

On this link http://forum.imgburn.com/index.php?showtopic=131 the IMGburn forum. It did fine, opened DVDD to decrypt, then Shrink opened imgburn ... that's not where they are supposed to link to?

[Dialysis1]

That's an old link. Don't go by that. Simply install DVD Decrypter and then install ImgBurn. They will be in different folders.

[lancenpam]

Then the links....

Will the links in Ripit4me be correct or do I need to reinstall it also?