Unusual DVD Burn Problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pg23
    Vigilant EC Founder/CEO
    • Jan 2007
    • 3
    #1

    Unusual DVD Burn Problem

    Well a week ago, I was messing around with my graphics card drivers to install an old Driver to play an old program. I have a geforce 6800ultra. Now I gave up and decided to go back to the original driver. Later I decided to burn a backup of a movie (4.3gb), then about 5 minutes into the burn, the dvd drive spits out the dvd and the burn fails. I'm using Nero 7 to burn too. I can burn stuff on dvd that are under 2gb or something. I dunno, it mightve been a freak occurance. I continue burning various things over 4 gigs or 3gigs and they all fail. I wasted a lot of dvd's fixing things. I tried reinstalling Nero, I tried updating my DVD driver, I tried restarting. None seem to work.

    Also, previously burn, like a day before, I used a different brand of DVD which I just so happen to use the last of. Now i'm using 4x compUSA brand. A big money saving moment. lol and its a pack of 100.

    I tried burning on my laptop with the same DVD and it burns succesfully. But I think it was under 3gigs. I'm going to test out burn something over 3gigs.

    Here is the Nero Burn log for the failed attempts.
    Code:
    sds
ds

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
 (Nero Express)
Recorder:             <PLEXTOR DVDR   PX-712A>  Version: 1.09 - HA 1 TA 3 - 7.7.5.1
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      8192kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <PLEXTOR  DVDR   PX-712A  >Version: 1.09 - HA 1 TA 3 - 7.7.5.1
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : PLEXTOR DVDR   PX-712A           atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : WDC WD360GD-00FNA0      35.0  viasraid Port 2 ID 0  DMA: Off
DiskPeripheral       : ST3120026AS             3.18  viasraid Port 2 ID 2  DMA: Off
OtherPeripheral      : Promise RAID Console    1.00  fasttx2k Port 3 ID 4  DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR   PX-712A     F:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1022MB (1047280kB)
Free physical memory: 522MB (535396kB)
Memory in use       : 48 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

25.1.2007
Burn DVD Image
8:41:00 PM    #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
8:41:00 PM    #2 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media
    
8:41:00 PM    #3 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2286039 (508:00.39, 4464MB)
    
8:41:00 PM    #4 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)
    
8:41:00 PM    #5 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: PLEXTOR DVDR   PX-712A, Media type: DVD-R
     Disc Manufacturer: AML - 
     Disc Application Code: 64, Disc Physical Code: 193
    
8:41:00 PM    #6 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
8:41:00 PM    #7 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
        2 indices, index0 (150) not provided
        original disc pos #0 + 2286040 (2286040) = #2286040/508:0.40
        not relocatable, disc pos for caching/writing not required/not required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285890 blocks [F: PLEXTOR DVDR   PX-712A]
    --------------------------------------------------------------
    
8:41:00 PM    #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [F: PLEXTOR DVDR   PX-712A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681809920, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |  2286040 |  2285890 | 0x00
            0 |        1 |   1 |    0x41 |  2286040 |  2285890 | 0x00
      2286040 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
8:41:00 PM    #9 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    
8:41:00 PM    #10 Phase 36 File dlgbrnst.cpp, Line 1760
    Burn process started at 4x (5,540 KB/s)
    
8:41:00 PM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
    
8:41:00 PM    #12 Text 0 File DVDR.cpp, Line 3070
    Recording mode: Sequential Recording Mode
    
8:41:00 PM    #13 Text 0 File DVDR.cpp, Line 3226
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
8:41:00 PM    #14 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
     Disc Size: 120 mm,      Maximum Rate: 10.08 Mbps (2 h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     End Physical Sector Number of Data Area:      26127F h
     End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
     Data in Burst Cutting Area (BCA) does not exist
      Start sector number of the current Border-Out: 0 h
      Start sector number of the next Border-In:     0 h
     Media Specific [16..63]:
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
8:52:02 PM    #15 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x07
    CDB Data:   0x2A 00 00 19 E0 C0 00 00 20 00 00 00 
    Sense Area: 0xF0 00 03 00 19 D4 70 0A 00 00 00 00 0C 07 
    Buffer x09a99640: Len x10000
    0x00 00 01 BA 45 62 3F 37 8C 13 01 89 C3 F8 00 00 
    0x01 E0 07 EC 81 00 00 34 4B 20 5C 42 1F 00 00 00 
    0x01 11 42 93 4E 56 B2 76 C6 8E 19 A1 41 4A 38 F5 
    
8:52:02 PM    #16 CDR -1135 File Writer.cpp, Line 301
    Write error
    F: PLEXTOR DVDR   PX-712A
    
8:52:02 PM    #17 Text 0 File DVDR.cpp, Line 3446
    EndDAO: Last written address was 1695935
    
8:52:02 PM    #18 Phase 38 File dlgbrnst.cpp, Line 1760
    Burn process failed at 4x (5,540 KB/s)
    
8:52:02 PM    #19 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
8:52:10 PM    #20 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed
    
8:52:10 PM    #21 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    All the help would be greatly appreciated. I seriously hate wasting so many dvds.
    Last edited by pg23; 28 Jan 2007, 10:56 AM.
    Tags: None
    • pg23
      Vigilant EC Founder/CEO
      • Jan 2007
      • 3
      #2
      Any help at all? I'm pressed for time, and it would be great if someone generous can help me out. Thanks.

        Comment

        • locoeng
          Who Farted?
          • Dec 2005
          • 2509
          #3
          Disc Manufacturer: AML -
          Even though you saved some money it looks like it costing you headaches...this is your media, terrible.

          Media Specific [16..63]:
          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
          Your drive doens't see the media correctly...there should be more than just zeroes here.

          CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
          Sense Key: 0x03 (KEY_MEDIUM_ERROR)
          Yup, drive doesn't like media at all.

          DiskPeripheral : WDC WD360GD-00FNA0 35.0 viasraid Port 2 ID 0 DMA: Off
          DiskPeripheral : ST3120026AS 3.18 viasraid Port 2 ID 2 DMA: Off
          Not familiar with Raid setups, so I don't know if DMA needs to be on here...


          "I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
          Walt Kelly

            Comment

            • pg23
              Vigilant EC Founder/CEO
              • Jan 2007
              • 3
              #4
              It may be cheap media, but it for sure isn't worthless. It works with my laptop even with 3gb's of burning data.

              So will it be possible for getting my DVD Burner to accept the media? The sad thing is I'm pressed for money, and pressed for memory on my laptop. So the only choices I have is remove a lot of data on my laptop or tweak with the dvd burner, in which I have no idea of where to start.

              Thanks for the reply btw. Anyone else know how I can fix this?

                Comment

                • Chewy
                  Super Moderator
                  • Nov 2003
                  • 18971
                  #5
                  It may be cheap media, but it for sure isn't worthless.
                  yes it is, I bought 100 over a year ago, I returned them after making several coasters. Newer burners hate crap like that.
                  I had a plex 712, they don't like 3rd or 4th class media at all
                  Same with my benq, it will spit out marginal disks, that doesn't prove didly squat.

                  Anyone else know how I can fix this?
                  buy better media, take them back, compusa is used to it. Return the coasters with them.
                  50 good disks is better than 100 bad ones
                  Last edited by Chewy; 27 Jan 2007, 01:48 PM.

                    Comment

                    Previous template Next
                    Working...