Burn process fails everytime at 4x

**Chewy** · 11 Jan 2008, 01:09 PM

Can only write at 4x instead of 16x,

because speed of source data is too slow

your dma is off on that top maxtor drive. look at the log

you are running sp2 on xp?

unusual for a hard drive to slip into pio mode, might need a new cable, a stronger power supply

something is wrong for sure

**zaid786** · 11 Jan 2008, 02:56 PM

I'm actually running a dual boot with windows xp sp2 and windows vista. But the log is from windows xp. How do I turn the dma on? I'm using a 450W power supply is that enough? What else can I do?

**Chewy** · 11 Jan 2008, 03:02 PM

How to check your DMA status & reset it if necessary - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=61905

Talk about everything else not included in other sub-forums

the power supply would depend upon the brand, is it a good one or a cheap no-name?

**NightTran** · 11 Jan 2008, 04:26 PM

I purchased a 100 pack of cmc 16x printable dvd+r's and so far I've burned about 50 of them without problems

are they two diff spindles? you may have a defective one

**zaid786** · 12 Jan 2008, 12:15 AM

My psu is a cheap generic brand called winpower and I've been using it for over 2 years without problems. I had the exact same psu in my sister's pc and it didnt even last a year. So I assume its hugely variable in quality. The cmc's that I bought came in shrink wrap packs of 50. So yeah it could be a bad batch? But I'm just worried about this dma thing. Maybe I should take off the power for 2 hard drives and just run one and see how that goes? Can anyone tell me more about the errors I get in the log? Like pma update failure? key medium error? and could not perform disc at once?

**Chewy** · 12 Jan 2008, 12:25 AM

power supplies usually go out one of two ways, all at once or a little at a time

it's kind of hard to pinpoint problems when everything is a possible suspect, I would rather use good media, good burner, good burn program, and a good power supply and not waste my time and trouble and money making coasters or disks that barely burned and will be unplayable in a year or two

**zaid786** · 12 Jan 2008, 12:25 AM

Another thing I was wondering, the link you gave me for the dma modes, it says dma ultra mode 5 is the fastest, but one of my hard drives is in mode 6? Is the guide old?

**Chewy** · 12 Jan 2008, 12:29 AM

no you are running some kind of ide emulation drivers and your sata is showing as having dma, technically it doesn't(another can of worms)

the guide is fine, did you fix your dma, I would unhook some stuff from that power supply and order a good one soon

**zaid786** · 12 Jan 2008, 12:37 AM

Yeah I fixed the dma, 2 hard drives on the primary ide are in ultra mode 6, and another hard drive is in secondary ide which is also in ultra mode 6, and the other secondary ide which i assume is the dvd writer is in ultra mode 2. Which psu's would you recommend?

**Chewy** · 12 Jan 2008, 12:42 AM

there's little difference between mode 6 and 5, half the companies said heck with 6 (133) and just went to work on the new sata

irrelevant to your problems

**zaid786** · 12 Jan 2008, 12:44 AM

So would you say that its definitely a problem with my psu and not the media i'm using? Or are you saying I should change my psu because it could be causing the problems?

**Chewy** · 12 Jan 2008, 12:58 AM

it's kind of hard to pinpoint problems when everything is a possible suspect, I would rather use good media, good burner, good burn program, and a good power supply and not waste my time and trouble and money making coasters or disks that barely burned and will be unplayable in a year or two

this is the problem

you are not getting the concept of having everything right instead of having everything wrong

why can't the media and the power supply both be the problem and maybe even your burner wearing out?

**zaid786** · 12 Jan 2008, 01:03 AM

Yeah it could be, would be really frustrating if it was all three lol I've taken off both the sata hard drives for the time being and just have a 80gb ide hard drive and my dvd writer. Will try another burn and see how that goes.

**zaid786** · 12 Jan 2008, 01:23 AM

I attempted another burn and got this:

Zaid
n/a

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 5 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B F: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1512MB (1548372kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.1.2008
UDF compilation
14:07:33 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:07:33 #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

14:07:33 #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

14:07:33 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

14:07:34 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2097599 (466:07.74, 4096MB)

14:07:34 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14:07:34 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

14:07:34 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:07:34 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2097600 (2097600) = #2097600/466:8.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2097600 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

14:07:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4295884800, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2097600 | 0 | 0x00
2097600 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:07:34 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:07:34 #12 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

14:07:34 #13 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

14:07:34 #14 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

14:07:34 #15 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

14:07:34 #16 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5,540 KB/s)

14:07:34 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:07:34 #18 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:07:34 #19 Text 0 File DVDR.cpp, Line 6525
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

14:07:34 #20 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM

14:07:34 #21 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

14:07:34 #22 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

14:20:41 #23 Text 0 File WriterStatus.cpp, Line 113
<F: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 2097600 (2001C0h), length 0 blocks

14:20:52 #24 SPTI -1194 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04

14:21:22 #25 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2097600

14:21:22 #26 CDR -1194 File ThreadedTransferInterface.cpp, Line 1883
PMA update failure
F: HL-DT-ST DVDRAM GSA-4167B

14:21:22 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1883
Could not perform end of Disc-at-once

14:21:41 #28 SPTI -1194 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04

14:21:41 #29 Phase 127 File dlgbrnst.cpp, Line 1764
Generating DVD high compatibility borders

14:21:44 #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

14:21:44 #31 CDR -1194 File WriterStatus.cpp, Line 162
PMA update failure
F: HL-DT-ST DVDRAM GSA-4167B

14:21:44 #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

14:21:44 #33 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5,540 KB/s)

14:21:44 #34 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:21:44 #35 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

14:21:44 #36 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Burn process fails everytime at 4x

Burn process fails everytime at 4x

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment