New build refuses to burn DVD's with WinAvi

[rippa1]

I recently upgraded my rig and once I had upgraded WinAvi just wouldn't burn DVD's. It would convert the files fine but when it came to burning them to a DVD the program would just hang at 0% and I would have to restart my computer. Before I upgraded a few part's it worked perfectly and my Dvd burner is quite new as is the rest of my rig. My mobo's always have the latest bios. Here are my spec's and the part's I upgraded from:-

Q6600(not G0,think it is B3)@3.2, wouldn't burn at stock either

Asus P5NE-Sli 650i (I now have the XFX MB-N780I-ISH9 Tris Sli

EVGA 8800GTS 320mb ( I now have 2 x BFG 8800GT OC 512mb's in Sli

2GB Geil Ultra DDR2 PC6400 Dual Channel memory 800MHz (4-4-4-12)
(I now have added another 2gb to make it 4gb of the same memory(I'm sure it wouldn't work with just 2gb either)

2 x 320gb WD AAKS HD's ( I put these in Raid 0 when I upgraded my comp, I have had these in raid 0 before and never encountered any problems)

OCZ 600SXS StealthXStream 600W PSU( Not the Sli ready version)

Creative Xfi Extreme Gamer soundcard

All my HD's and dvd drive etc are connected using sata leads and the temps in my case are fine. I have an Antec 900 with 2 x 120mm fans in the front, 1 at the side,1 at the back 1 on the Thermalright Ultra 120 extreme CPU HSF, the huge fan at the top of the case and a corsair dominator ram cooler.

My Dvd drive is the Sony/Nec Optiarc Dvd RW AD-7170S fimware version 1.0 (I have just updated the firmware to the Liggy's and Dee's modified NEC and Optiarc firmware which is supposed to be really good)

I can't see the drive being the problem really as it is quite new and it worked fine before I upgraded and it burns files fine with nero, Data discs etc. Also the discs I am using work fine and always do, I usually have hardly any coasters

I am using Xp Pro 32bit

I just can't figure it out. I thought maybe it was some kind of incompatibility issue with my mobo as it is pretty new and there may well still be some bugs that need ironing out(I have already updated the bios). Either that or my dvd drive is fubar but I don't want to go out and buy a new one right away as I doubt that is the problem. I have K-lite codec pack installed, my windows is genuine and fully updated. I have tried WinAvi 8 and 9. I just can't figure it out. Any help would be much appreciated. Thank You

[Chewy]

does it still burn data dvd's with nero? If so post a burn log from nero.
I have never heard anything good about that other program and burning.

[rippa1]

does it still burn data dvd's with nero? If so post a burn log from nero.
I have never heard anything good about that other program and burning.

It does burn data dvd's with Nero still. By burn log do you mean the information you get when you are burning a project?

[Chewy]

http://forum.digital-digest.com/showthread.php?t=67507

be sure it's the most recent one

[rippa1]

I have Nero 8 Lite ,I'm going to do a log file now

[NightTran]

or you could try DVD flick then burn with imgburn, then save more time with nero problem

[rippa1]

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.2.8.0
Internal Version: 8, 2, 8, 0
(Nero Express)
Recorder: <Optiarc DVD RW AD-7170S> Version: 1.M1 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <Optiarc DVD RW AD-7170S >Version: 1.M1 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA STRIPE 596.18G nvrd32 Port 0 ID 1 DMA: Off
ArrayPeripheral : NVIDIA nvgts Port 3 ID 0 DMA: Off
ArrayPeripheral : NVIDIA nvgts Port 3 ID 1 DMA: Off
CdRomPeripheral : Optiarc DVD RW AD-7170S 1.M1 nvgts Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7170S D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1741MB (1783124kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.1.2008
ISO compilation
17:06:02 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

17:06:02 #2 Text 0 File Isodoc.cpp, Line 6655
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:06:02 #3 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

17:06:02 #4 Text 0 File Burncd.cpp, Line 3502
Turn on Disc-At-Once, using DVD media

17:06:03 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

17:06:03 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2068959 (459:46.09, 4040MB)

17:06:03 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

17:06:03 #8 Text 0 File DlgWaitCD.cpp, Line 2957
Recorder: Optiarc DVD RW AD-7170S, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

17:06:03 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:06:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 762
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2068960 (2068960) = #2068960/459:46.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2068960 blocks [D: Optiarc DVD RW AD-7170S]
--------------------------------------------------------------

17:06:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 964
Prepare [D: Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4237230080, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2068960 | 0 | 0x00
2068960 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

17:06:05 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

17:06:05 #13 Text 0 File Burncd.cpp, Line 4288
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

17:06:05 #14 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

17:06:05 #15 Text 0 File Burncd.cpp, Line 4407
Cache writing successful.

17:06:05 #16 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

17:06:05 #17 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 18x (24,930 KB/s)

17:06:05 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:06:05 #19 Text 0 File DVDR.cpp, Line 3273
Recording mode: Sequential Recording Mode for Multisession

17:06:05 #20 Text 0 File DVDR.cpp, Line 3427
Start write address at LBA 0
DVD high compatibility mode: Yes

17:06:05 #21 Text 0 File Cdrdrv.cpp, Line 10140
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:06:05 #22 Text 0 File DVDR.cpp, Line 3565
Reserved Track size: 2068960 (1F91E0h, 4040MB) -> return code 0

17:06:05 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

17:14:17 #24 Text 0 File WriterStatus.cpp, Line 240
<D: Optiarc DVD RW AD-7170S> start writing Lead-Out at LBA 2068960 (1F91E0h), length 0 blocks

17:14:21 #25 Phase 133 File dlgbrnst.cpp, Line 1767
Writing short lead-out

17:15:01 #26 Text 0 File DVDR.cpp, Line 3833
EndDAO: Last written address was 2068959 (1F91DFh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: NO, ret: 0

17:15:01 #27 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 18x (24,930 KB/s)

17:15:01 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:15:06 #29 Text 0 File Cdrdrv.cpp, Line 11391
DriveLocker: UnLockVolume completed

17:15:06 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[jmet]

CdRomPeripheral : Optiarc DVD RW AD-7170S 1.M1 nvgts Port 4 ID 0 DMA: Off

Turn your DMA on

Burn process completed successfully at 18x (24,930 KB/s)

way to fast....burn it at 8x


Its been awhile since I have diagnosed a burn log but, those were the real obvious ones.

[jmet]

Go here to learn how to turn your DMA on: http://www.digital-digest.com/articl...dma_page1.html

[Chewy]

I need a good link to that mobo?

sata burner may have issues with controller/drivers?

the burn took 9 minutes which is way too slow for 18X and that mid code

those are real verbatims?

[rippa1]

Go here to learn how to turn your DMA on: http://www.digital-digest.com/articl...dma_page1.html

I followed these instructions, when I re-booted it didn't do the found new hardware bit but drivers were installed as I went and checked. It says:-

Transfer Mode DMA if available
Current Tranfer Mode Not applicable

[Chewy]

sata doesn't use dma

[rippa1]

I need a good link to that mobo?

sata burner may have issues with controller/drivers?

the burn took 9 minutes which is way too slow for 18X and that mid code

those are real verbatims?

"Real Verbatrims" Do you mean the type of disc's?, they're blank white with no labels/writing etc. I used Nero info Tool and it said the disc's were DVD-R MCC 03RG20. I typed this in google and it said they are Verbatrim's(same serial number) Read speed 16X, Write speed 18x

Here is a linik to the mobo details on XFX's website:-

http://www.xfxforce.com/web/product/listConfigurations.jspa?series=XFX+nForce+780i&seriesId=1743782#

And thanks for the help peeps

[Chewy]

xfx identifies it as
XFX nForce 780i 3-Way SLI Intel Motherboard

?????????????

your link didn't work and your description was not accurate

I assume you are using the 9.46 drivers and mode is set to ide in bios?

http://www.xfxforce.com/web/support/searchDriversProductCode.jspa

burn manually with nero since it sort of works, those disks were branded/labeled verbatim right? or what name were they sold under?

win/spam/avi has a hard enough time with conversions, forget burning with it

[NightTran]

some of the white Verb s-ck