Which of these should I flash with?
Firmware nec 3550a?
Collapse
X
-
Firmware nec 3550a?
Asus P5N-E Sli nForce 650i mobo
Intel Quad Q6600 2.4 Ghz
4 Gb OCZ Platinum Rev 2 PC6400 DDR2 800mhz
Samsung 203B(sata)
BenQ 1655(ide)
Lite-On LH-20A1S-12 (sata)
500Gb WD caviar (sata)
300Gb Seagate Barracuda (ide)
500Gb Western Digital external Harddrive USB X 2
600w Ultra Infinity PS
8500GT 512mb Vid
Samsung Syncmaster 906BW
Vista Ultimate (32 bit)Tags: None -
Thanks chewy whats 3550a like with mid media?Asus P5N-E Sli nForce 650i mobo
Intel Quad Q6600 2.4 Ghz
4 Gb OCZ Platinum Rev 2 PC6400 DDR2 800mhz
Samsung 203B(sata)
BenQ 1655(ide)
Lite-On LH-20A1S-12 (sata)
500Gb WD caviar (sata)
300Gb Seagate Barracuda (ide)
500Gb Western Digital external Harddrive USB X 2
600w Ultra Infinity PS
8500GT 512mb Vid
Samsung Syncmaster 906BW
Vista Ultimate (32 bit)Comment
-
Thanks Tran do you have same firmware?Asus P5N-E Sli nForce 650i mobo
Intel Quad Q6600 2.4 Ghz
4 Gb OCZ Platinum Rev 2 PC6400 DDR2 800mhz
Samsung 203B(sata)
BenQ 1655(ide)
Lite-On LH-20A1S-12 (sata)
500Gb WD caviar (sata)
300Gb Seagate Barracuda (ide)
500Gb Western Digital external Harddrive USB X 2
600w Ultra Infinity PS
8500GT 512mb Vid
Samsung Syncmaster 906BW
Vista Ultimate (32 bit)Comment
-
mine were 05, it is in the closet somewhere because I love my Benq, I have LG 4167, nec 3550 and PIO 111D, benq old 1620 plus a new set of 1640 and 1655 I will take them out again when all my Benq dead I also had benq 1650 and Plex 716A that are own now by one of the member here who contribute alot to this forum, if you love this forum and someday one of my burner would be yours
RegardsigpicComment
-
Just my 2 cents, I used the 1Y6 firmware once Chewy opened my eyes to it, then tried Liggy and Dee's version of 1.07 firmware, been using it flawlessly since.
Similar and both excellent for the 3550 IMO. Done thousands of burns, scans, reads with it and still going strong.
Comment
-
I had troubles with mine after 6-700 burns, guesstimating? Got dirty, my fault! Cleaned it a few times, found a dab of silicon on large chip and it looked like it had outgassed when overheated, probably from trying to burn too many disks in a row without cooling inbetween, cleaned the lens and it was fine, I put it in my daughter's computer. What made mine good was it gave accurate scans as compared to my benq 1650, a lot of nec 3550 didn't scan well. Why?Comment
-
is the 3550a good at scanning? what are the best scanning drives?Asus P5N-E Sli nForce 650i mobo
Intel Quad Q6600 2.4 Ghz
4 Gb OCZ Platinum Rev 2 PC6400 DDR2 800mhz
Samsung 203B(sata)
BenQ 1655(ide)
Lite-On LH-20A1S-12 (sata)
500Gb WD caviar (sata)
300Gb Seagate Barracuda (ide)
500Gb Western Digital external Harddrive USB X 2
600w Ultra Infinity PS
8500GT 512mb Vid
Samsung Syncmaster 906BW
Vista Ultimate (32 bit)Comment
-
I prefer to do the flash from safe mode, sticks it in pio mode and keeps a lot of programs from interfering
standalone master is one other thing that used to be reccomended
always make sure the flash matches the drive and the drive is emptyComment
-
questions
So do I just put it in SAFE MODE and then run the Y6 that I ran from Liggy & Dees is it self contained or do I have to use Bin Flash or something else?Comment
Comment