Power calibration error...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rkch
    Junior Member
    Junior Member
    • Aug 2011
    • 1

    Power calibration error...

    Dear All,

    i am using Sony vaio on windows7..suddenly i got an error while trying to burn a cd or dvd using nero and thrown an error like

    Power calibration error...

    i tried with updating the driver s/w and buring at multiple speeds but did not worked out..

    on googling i found this sort of errors got resolved by disabling IMAPI service on windows xp but i could not find this service in windows 7..

    pls let me know if any body has a solution for this..


    here is the log..




    Windows 7 6.1
    AMD64
    Wow64Process
    Nero Version: 10.2.12.100
    Internal Version: 10,2,12,100
    Recorder: <MATSHITA DVD-RAM UJ890AS>Version: 1.00 - HA 1 TA 0 - 10.2.12.100
    Adapter driver: <Serial ATA> HA 1
    Drive buffer : 1024kB
    Bus Type : via Inquiry data
    CD-ROM: <ELBY CLONEDRIVE >Version: 1.4 - HA 1 TA 1 - 10.2.12.100
    Adapter driver: <SCSI> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK3265GSX iaStor Port 0 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM UJ890AS iaStor Port 0 ID 1 DMA: Off
    CdRomPeripheral : ELBY CLONEDRIVE 1.4 VClone Port 1 ID 0 DMA: Off
    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ890AS E: CdRom0
    ELBY CLONEDRIVE G: CdRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2990MB (3061860kB)
    Free physical memory: 1699MB (1739884kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    21.8.2011
    ISO compilation
    19:54:06 #1 Text 0 File SCSIPTICommands.cpp, Line 464
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    19:54:06 #2 Text 0 File Isodoc.cpp, Line 7008
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    19:54:07 #3 ISO9660GEN -11 File Geniso.cpp, Line 3336
    First writeable address = 0 (0x00000000)

    19:54:08 #4 Text 0 File Burncd.cpp, Line 3521
    Turn on Disc-At-Once, using DVD media

    19:54:09 #5 Text 0 File Cdrdrv.cpp, Line 10512
    ---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    Outer Limit of Data Recordable Area: 26127F h
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0, Extended part version: 33
    Start PSN of the Extra Border Zone: 2FE10 h
    Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
    Media Specific [16..783]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


    19:54:09 #8 Text 0 File DlgWaitCD.cpp, Line 2917
    Recorder: MATSHITA DVD-RAM UJ890AS, Media type: DVD-R
    Disc Manufacturer ID: <MBI 01> <RG40>
    Disc Application Code: 64, Disc Physical Code: 193

    19:54:09 #9 Text 0 File DlgWaitCD.cpp, Line 499
    [E: DVD-RAM UJ890AS ] >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:54:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 861
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 321120 (321120) = #321120/71:21.45
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 321120 blocks [E: MATSHITA DVD-RAM UJ890AS]
    --------------------------------------------------------------

    19:54:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1077
    Prepare [E: MATSHITA DVD-RAM UJ890AS] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 657653760, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 321120 | 0 | 0x00
    321120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
    MediaType: DVD-R

    19:54:09 #12 Text 0 File SCSIPTICommands.cpp, Line 251
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    19:54:09 #13 Text 0 File Burncd.cpp, Line 4234
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    19:54:09 #14 PHASE 24 File dlgbrnst.cpp, Line 1827
    Caching of files started

    19:54:09 #15 Text 0 File Burncd.cpp, Line 4356
    Cache writing successful.

    19:54:09 #16 PHASE 25 File dlgbrnst.cpp, Line 1827
    Caching of files completed

    19:54:09 #17 PHASE 28 File dlgbrnst.cpp, Line 1827
    Maximum transfer rate test started

    19:54:09 #18 Text 0 File Cdrdrv.cpp, Line 10512
    ---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    Outer Limit of Data Recordable Area: 26127F h
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0, Extended part version: 33
    Start PSN of the Extra Border Zone: 2FE10 h
    Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
    Media Specific [16..783]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................


    #19 Text 0 File ThreadedTransferInterface.cpp, Line 2850
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:54:09 #20 Text 0 File ThreadedTransfer.cpp, Line 273
    Pipe memory size 590400

    19:55:39 #21 Text 0 File WriterStatus.cpp, Line 244
    <E: MATSHITA DVD-RAM UJ890AS> start writing Lead-Out at LBA 321120 (4E660h), length 0 blocks

    19:55:39 #22 PHASE 29 File dlgbrnst.cpp, Line 1776
    Maximum transfer rate test completed: 5.1x (7,132 KB/s)

    19:55:39 #23 Text 0 File Burncd.cpp, Line 4430
    Can only write at 6x instead of 8x,
    because speed of source data is too slow

    19:55:39 #24 PHASE 36 File dlgbrnst.cpp, Line 1827
    Burn process started at 6x (8,310 KB/s)

    19:55:39 #25 Text 0 File Cdrdrv.cpp, Line 10512
    ---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    Outer Limit of Data Recordable Area: 26127F h
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0, Extended part version: 33
    Start PSN of the Extra Border Zone: 2FE10 h
    Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
    Media Specific [16..783]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ...
    11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00 ........../7/)..
    13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00 .P.-............
    15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00 ..........?3/)..
    17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00 .P!-............
    19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00 ..........Q7/)..
    1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00 .P.-............
    1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    19:55:39 #32 Text 0 File ThreadedTransfer.cpp, Line 273
    Pipe memory size 83836800

    19:55:58 #33 SPTI -1106 File SCSIPassThrough.cpp, Line 224
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 19 25 73 03
    Buffer x10010040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    19:55:58 #34 TRANSFER -60 File ThreadedTransfer.cpp, Line 1222

    19:55:58 #35 CDR -1106 File Writer.cpp, Line 335
    Power calibration error
    E: MATSHITA DVD-RAM UJ890AS

    19:55:58 #36 PHASE 181 File dlgbrnst.cpp, Line 1827
    Writing lead-out...

    19:55:58 #37 SPTI -1106 File SCSIPassThrough.cpp, Line 224
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    CDB Data: 0x5B 01 02 00 00 02 00 00 00 00 00 00
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 19 25 73 03

    19:55:58 #38 Text 0 File DVDR.cpp, Line 3712
    EndDAO: Last written address was -1 (FFFFFFFFh)Close Session/Border, function 2, track: 2, finalize disc: NO, ret: -1106

    19:55:58 #39 CDR -1106 File WriterStatus.cpp, Line 291
    Power calibration error
    E: MATSHITA DVD-RAM UJ890AS

    19:55:58 #40 TRANSFER -24 File ThreadedTransfer.cpp, Line 1222
    Could not perform end of Disc-at-once

    19:55:58 #41 Text 0 File DVDPlusDualLayer.cpp, Line 1460
    SetDriveCaps: Set LAST LBA of layer 1 to 0

    19:55:58 #42 PHASE 38 File dlgbrnst.cpp, Line 1827
    Burn process failed at 6x (8,310 KB/s)

    19:55:58 #43 Text 0 File SCSIPTICommands.cpp, Line 301
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    19:55:58 #44 Text 0 File Cdrdrv.cpp, Line 11882
    DriveLocker: UnLockVolume completed

    19:55:58 #45 Text 0 File SCSIPTICommands.cpp, Line 464
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    1
    Disabling IMAPI Service..
    0%
    0
    updating the driver..
    0%
    1
Working...