Sony TRV480

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JoeD
    Junior Member
    Junior Member
    • Sep 2007
    • 1

    Sony TRV480

    Hi,

    I have a Sony DCR-TRV480 that's suddenly giving me an error message: Reinsert Cassette. It is properly inserted. Anyone out there have any suggestions as to what's going on here? Thanks.
  • RFBurns
    To Infinity And Byond
    • May 2006
    • 499

    #2
    Common causes to this problem is either the cassette door is not opening properly once the mech loads..which is due to a slightly bent, tiny lever that unlocks the cassette door as the cartridge is inserted into the load basket....or the mech is out of timming. The timming error happens when a tape is forced or shoved into the load basket, putting too much pressure on the mech and can jump a few degrees off time, thus the sensors in the mech detects a "mis-load" and gives the error message you are seeing.


    Here..I will fix it!

    Sony Digital Video and Still camera CCD imager service

    MCM Video Stabalizer

    Comment

    Working...