Burn process failed

[bigbear2k]

I can not burn a DVD this is the burn log please help.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <GENERIC DVD RW 8XMax> Version: 140I - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <GENERIC DVD RW 8XMax >Version: 140I - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : GENERIC DVD RW 8XMax atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340016A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 6YS1 iteraid Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
GENERIC DVD RW 8XMax E: CDRom1
SONY CD-RW CRX220E1 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047852kB)
Free physical memory: 510MB (522508kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.9.2005
UDF/ISO compilation
11:43:09 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:43:09 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:43:09 PM #3 Text 0 File Writer.cpp, Line 122
Writer GENERIC DVD RW 8XMax running

11:43:09 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:43:09 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:43:09 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:43:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

11:43:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:43:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

11:43:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:43:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [GENERIC DVD RW 8XMax]
--------------------------------------------------------------

11:43:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [GENERIC DVD RW 8XMax] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

11:43:17 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:43:17 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:43:17 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:43:17 PM #16 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)

11:43:17 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:43:17 PM #18 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

11:43:17 PM #19 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: No

11:57:19 PM #20 Text 0 File WriterStatus.cpp, Line 116
<GENERIC DVD RW 8XMax > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

11:57:19 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:57:49 PM #22 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)

11:57:50 PM #23 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

11:57:50 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:57:50 PM #25 CDR -1066 File ThreadedTransferInterface.cpp, Line 1741
Invalid field in command
GENERIC DVD RW 8XMax\H0 T0

11:57:50 PM #26 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1741
Invalid track info

11:57:50 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[blutach]

11:57:49 PM #22 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)

You are in simulation (test) mode!!!

Uncheck the box in Nero and actually burn the disk It looks fine (burns successfully message at the end)

Regards

[Taelon]

Whoever built your system screwed up, the hard drive should be the Primary Master, and I'd recommend moving the DVD-burner to the Secondary Master, move the CD burner to Secondary Slave. Also Nero isn't recognizing the drive properly "GENERIC DVD RW 8XMax", with Version: 140I firmware doesn't mean anything to me. Try to find out the actual make & model of the drive and then do a search for updated firmware (see the links in the DVDShrink FAQ).

[bigbear2k]

You are in simulation (test) mode!!!

Uncheck the box in Nero and actually burn the disk It looks fine (burns successfully message at the end)

Regards

Thank you for the welcome. I did the test and burn the test wroks just fine the burn fails.

[vw56german]

Please post the actually burn log from the failure.

[LT. Columbo]

that is the right log, and the simulation went fine, it fails when the burn starts. how many times have you got this error? and have you tried another type of media?

[vw56german]

oops sorry my bad, i see it in the log now.

[bigbear2k]

I can burn CDR and CDRWs but I can not burn DVDR or RWs. I think my problem is that I am using a GENERIC DVD RW drive D43010

[2COOL]

Recorder: <GENERIC DVD RW 8XMax> Version: 140I - HA 0 TA 0 - 6.6.0.16

I see a firmware 150I here for your drive.

[2COOL]

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

I've read here that your atapi.sys from SP2 that you are using is "buggy" and that you should revert to the previous one. Maybe, it'll work for you.

[bigbear2k]

Don't I feel smart I should have known to check my firmware. It works now thank you all for your help!

[2COOL]

[Taelon]

@2COOL, Well spotted

@bigbear2k, What does Nero report your drive as now? Is it still listed as GENERIC?