Time to assemble a new pc!

[jm1647]

that's a little high for my taste, try to keep the case well ventilated with
lots of fresh air

those cpu's redline in the 60's, old xp's redlined in the 80's

your other temps will tell if the case is holding the heat in

did you bump the core voltage?

I still have the case side off...maybe I shoulda used artic silver, I used the stuff that came with the Thermaltake HSF

[jm1647]

Core Voltage bump, not me it went up by itself.

[Chewy]

see my edit in other post

do a sensor post from everest some time after cool down and bootup and another after 30minute load

[jm1647]

right now MOBO 34C
CPU 46C
Aux 51C
GPU 53C

[Chewy]

Temperatures:
Motherboard 23 °C (73 °F)
CPU 26 °C (79 °F)
GPU 30 °C (86 °F)
GPU Ambient 26 °C (79 °F)
DW CDW63G0-D00NF0A 36 °C (97 °F)
Seagate ST3250823AS 34 °C (93 °F)

case open 62F room

[jm1647]

Sensor after reboot Room temp 75F

--------[ Sensor ]------------------------------------------------------------------------------------------------------

Sensor Properties:
Sensor Type ITE IT8712F (ISA 290h)
GPU Sensor Type Driver (NV-DRV)

Temperatures:
Motherboard 32 °C (90 °F)
CPU 34 °C (93 °F)
Aux 37 °C (99 °F)
GPU 48 °C (118 °F)

Cooling Fans:
CPU 2163 RPM
Power Supply 6027 RPM

Voltage Values:
CPU Core 1.47 V
+3.3 V 3.31 V
+5 V 5.00 V
+12 V 11.90 V
+5 V Standby 4.95 V
VBAT Battery 3.09 V
Debug Info F 4E FF 1C
Debug Info T 37 32 34
Debug Info V 5C 00 CF BA BA BE 00 (F7)

[Chewy]

you might want to work on the airflow inside the case and around the tower

how come the vid card is heating up so much?

Room temp 75F

little warm for folding at home

[jm1647]

@Chewy - maybe I should mentioned it's been crunching WUs with F@H for about 36 hours at 100% CPU load. The 3 hours I mention was when I jacked it up a couple MHz to 23% OC after about a 1 minute shutdown.I'll post the temps again in about 10 minutes that will be a half hour after reboot, no load just idling.

[Chewy]

I think I would lower the cpu load from FH

[jm1647]

@Chewy - Sensor/temps half hour after reboot, surfing the net

Sensor Properties:
Sensor Type ITE IT8712F (ISA 290h)
GPU Sensor Type Driver (NV-DRV)

Temperatures:
Motherboard 32 °C (90 °F)
CPU 32 °C (90 °F)
Aux 35 °C (95 °F)
GPU 51 °C (124 °F)

Cooling Fans:
CPU 2136 RPM
Power Supply 6027 RPM

Voltage Values:
CPU Core 1.46 V
+3.3 V 3.31 V
+5 V 5.00 V
+12 V 11.90 V
+5 V Standby 4.95 V
VBAT Battery 3.09 V
Debug Info F 4F FF 1C
Debug Info T 35 32 32
Debug Info V

[jm1647]

you might want to work on the airflow inside the case and around the tower

how come the vid card is heating up so much?



little warm for folding at home

I'll be down in the basement where it will be cooler. Right now it's in the family room.

The vid card is a $41 MSI 64MB on board 256MB card, maybe that why it's getting hot, just a HS no fan. I have a couple 80MM fans I can thow in the case too.

[Chewy]

I would feel real bad if you burned up that cpu after I had you taste the apple

[jm1647]

I would feel real bad if you burned up that cpu after I had you taste the apple

Nah it would be on me

Ya can lead a horse to water remember ...

What would be the max temp you would go to? It seemed to max out mid 40's or so after a day and a half straight F@H @100% CPU usage.

[Chewy]

you are probably safe, but I would fix the airflow before warm weather hits, your ac konks out one day and you come home to a fried cpu after folding

[jm1647]

you are probably safe, but I would fix the airflow before warm weather hits, your ac konks out one day and you come home to a fried cpu after folding

yeah my house is the opposite, hot in the winter and cold in the summer. I'm about to move it to the basement in a coupla days. I got the mobo in the old Gateway box. I just got 2 new cases, the Ultra case FAR of $40, a bigger case and an Antec with a 350 watt PSU and a 120mm fan for $9.99 AR. I'll see how things go and keep an eye on it.

By the way the apple taste good...THANKS