Jake Wants a New Computer or to build one!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JakeBlues
    Digital Video Enthusiast
    Digital Video Enthusiast
    • Dec 2006
    • 364

    Originally Posted by Chewy
    A good case will channel some fresh air right to the cpu fan, that fan blows it over the heat sink and a high rear exhaust fan and strong power supply fan(s) take it out of the case
    sticking the tower back in a desk just recirculates that hot air
    So am I understanding you correctly... it's better for the fan to be mounted in the direction so it is blowing OUTWARDS?
    Also what is your opinion of those little 80mm case fans?
    If I am going to build this sucka.. I'm going to do it right!
    So any input is noted with a "thank you"
    ElwoodsBrotherJake "...I'm on a mission from God, to help me and others from making coasters!

    Comment

    • Chewy
      Super Moderator
      • Nov 2003
      • 18971



      this case has an option for a 120mm rear exhaust fan, the side air duct should be pulling cool air directly onto the top of the cpu fan

      you just have to build it and check the air flows

      Comment

      • JakeBlues
        Digital Video Enthusiast
        Digital Video Enthusiast
        • Dec 2006
        • 364

        Chewy n Soup.. question.. again (surprising huh?) hehe

        Originally Posted by soup
        Open up ImgBurn / Tools / Drive / Check for Firmware Updates.
        This will check for firmware for the new samsungs?
        I haven't done this in a while but when I install the burner the computer will see a new drive and ask me for disk or something... right?
        So I have to Install something at the time?

        Man I get confused...

        Chewy what did you mean in the other post when I was asking which firmware to use off the samsung site?
        "need the exact model and present firmware?".. didn't I have it?
        Last edited by JakeBlues; 25 Mar 2007, 11:35 PM. Reason: keep from making another post
        ElwoodsBrotherJake "...I'm on a mission from God, to help me and others from making coasters!

        Comment

        • Chewy
          Super Moderator
          • Nov 2003
          • 18971

          it says SH-S182m
          F/W sbo3
          looks like the latest

          Comment

          • soup
            Just Trying To Help
            • Nov 2005
            • 7524

            I haven't done this in a while but when I install the burner the computer will see a new drive and ask me for disk or something... right?
            The only part of my computer that I installed was the Lite-On, I connected it up internally as I was instructed, then switched on the computer & it took care of the rest, did not have to insert any disc. I think because my Lite-On is brand new, the firmware page could not find the specified string.
            Last edited by soup; 26 Mar 2007, 12:13 AM.

            Comment

            • locoeng
              Who Farted?
              • Dec 2005
              • 2509

              I haven't done this in a while but when I install the burner the computer will see a new drive and ask me for disk or something... right?
              Should be plug-n-play


              "I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
              Walt Kelly

              Comment

              • katzdvd
                Lord of Digital Video
                Lord of Digital Video
                • Feb 2006
                • 2198

                Also what is your opinion of those little 80mm case fans?
                Big 120's, move more air, quieter.
                Check out the CPU cooler, Jake; they've come a long way since a plain 'ol heatsink w/ fan screwed down to it!
                Last edited by katzdvd; 26 Mar 2007, 05:06 AM.

                Comment

                • JakeBlues
                  Digital Video Enthusiast
                  Digital Video Enthusiast
                  • Dec 2006
                  • 364

                  katz...
                  I've seen this board before but when you read the customer reviews.. it isn't impressive, strange for asus! I can't tell if this one had 2 ide headers on it or not...
                  Is this the route you went? I can't decide this or amdx2

                  think think think think... it's making me crazy the decisions!
                  thank ya!
                  ElwoodsBrotherJake "...I'm on a mission from God, to help me and others from making coasters!

                  Comment

                  • katzdvd
                    Lord of Digital Video
                    Lord of Digital Video
                    • Feb 2006
                    • 2198

                    I can't tell if this one had 2 ide headers on it or not
                    Yes, 2

                    I've seen this board before but when you read the customer reviews.. it isn't impressive
                    Pretty much any piece of hardware will have a mix of good & bad reviews; I have read on other sites where this is a good overclocking combo, & I will probably do that if I opt for this board.

                    Didn't make the purchase yet, but pretty close; after all, chewy recommended it, & that's good enough for me

                    Comment

                    • Chewy
                      Super Moderator
                      • Nov 2003
                      • 18971

                      almost 2 months later, choices are getting slim on the 939 sockets

                      Comment

                      • JakeBlues
                        Digital Video Enthusiast
                        Digital Video Enthusiast
                        • Dec 2006
                        • 364

                        Whoaaa Katz N Chewy, Check these...

                        Did you see these!?
                        here.. we just saved another $20 almost! (here ya go I did it)
                        Attached Files
                        Last edited by JakeBlues; 26 Mar 2007, 07:33 AM. Reason: New Info
                        ElwoodsBrotherJake "...I'm on a mission from God, to help me and others from making coasters!

                        Comment

                        • katzdvd
                          Lord of Digital Video
                          Lord of Digital Video
                          • Feb 2006
                          • 2198

                          almost 2 months later, choices are getting slim on the 939 sockets
                          Yeah, I know - a little late on the draw; after all, I am looking at year old technology to start with!

                          Comment

                          • Chewy
                            Super Moderator
                            • Nov 2003
                            • 18971

                            onboard video sucks but as long as you have that pci-express 16 option for later

                            Comment

                            • katzdvd
                              Lord of Digital Video
                              Lord of Digital Video
                              • Feb 2006
                              • 2198

                              I have a GeForce 7600 GT OC, still in the box, just waiting to be powered up!

                              Comment

                              • JakeBlues
                                Digital Video Enthusiast
                                Digital Video Enthusiast
                                • Dec 2006
                                • 364

                                Ok you see I made the BIG step before you!
                                (chicken)
                                hehehe Tell me about the GeForce 7600GT... That's one of my last steps is a video card. As you see in post #131 I took the HUGE leap!
                                hehe sniff-sniff is that Orginal Recipe or Extray Crispy I smell!???
                                ElwoodsBrotherJake "...I'm on a mission from God, to help me and others from making coasters!

                                Comment

                                Working...