if ur cursing ur luck to get hold of ver 7, well look at the new firmware and dont forget to look at the change log / fixes... ull be amazed, wondering why they on the first place put somthing like ver 7 out.
Linksys WRT54G ver 7 router
Collapse
X
-
ok for ppl who know linksys makes good products look at this, wondering how that thing was actually working before.
Firmware 7.00.4
- Resolves interoperability issue with WAP54G and WRE54G in WPA-PSK mode.
- Resolves intermittent reboot issue when BitTorrent is running when UPnP is enabled on the router.
- Resolves wireless data rate performance issues.
- Resolves issue with router assigns declined IP address to LAN host.
- Resolves issue with QoS module algorithm.
- Resolves reboot issue if fragmentation threshold is set to value less than 1500.
- Resolves issue with wireless MAC filtering configuration GUI.
- Resolves issue with saving RADIUS passphrase.
- Resolves display problems in routing policy configuration GUI.
- Resolves issue of RIP request packets not being sent out after switching to router mode.
- Resolves issue of logging the same event more than once when log function is enabled.
- Resolves issue of unexpected clearing of log when user stops and closes traceroute.
- Resolves issue of not being able to accessing some configuration settings after changing password.
- Resolves issues with incorrect beacon interval acceptable range and beacon packets not being sent out on some particular settings.
- Corrects "Port Range Forward" policies validation.
- Fixes problem of not storing DNS address(es) correctly if static DNS address(es) is/are used.
- For security purpose, "Clone Your PC's MAC" functionality is no longer available if user accesses router remotely.
- Resolves issue of displaying incorrect HTTPS certificate message.
- Fixes problem in QoS configuration validation.
- Fixes incorrect supported rates in beacon packets when wireless mode is set to 'mixed'.
- Resolves reboot issue with setting beacon interval to value greater than 5000.
- Corrects ARP exchange behavior on WAN interface (DHCP mode) after obtaining IP address via DHCP.
- Corrects PPTP connection behavior when PPTP mode is set to "on-demand" mode.
- Resolved issue with not being able to set UPnP policy with port number less than 1024.
- Fixes problem of DMZ feature not functioning properly.
- Resolves issue with not showing the most up-to-date connection status on WAN interface in MS Windows XP via UPnP.
- Resolves issue with LAN host intermittently not being able to obtain IP address from router via DHCP when DHCP server is enabled.
- Resolves issue with IP address assignment via DHCP on some particular devices.
- Corrects DHCP protocol stack behavior when switching from PPPoE mode to DHCP mode.
- Corrects "Access Restriction" behavior when system time is not available.
- Resolves issue of not trying alternative DNS if the preferred DNS does not respond.Seems like as soon you buy somehing, v. 2 comes out 1.5 times as fast!..!
Comment