ImgBurn error. Finalization problem. HELP!

[midnightangel]

I get the entire disc burned and when it finalizes, an error comes up saying there was a track missing and it can't replece it. Any ideas?

[Chewy]

set imgburn to save the logs and then you can post it

the more clues the better

[midnightangel]

I 22:57:04 Closing Track...
I 22:57:10 Finalising Disc...
W 22:57:25 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Unrecovered Read Error
E 10:17:33 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
I 10:17:33 Image MD5: e0274015f5c3ee06a87411dd32c32ca4
I 10:17:33 Operation Successfully Completed! - Duration: 11:38:31
I 10:17:33 Average Write Rate: 4,264 KB/s (3.1x) - Maximum Write Rate: 5,721 KB/s (4.1x)


The seems to be all that I highlighted. Oops! If this is not helpfull, let me know and I will burn again and save the whole report.

[Chewy]

before you waste another disk?
just put a blank in and copy and paste the right screen with burner firmware and mid code

[midnightangel]

Explain this to me a little better because I have no idea what you mean

[blutach]

Please post the last log. Access it from the help menu.

Regards

[soup]

Launch ImgBurn, put a blank disc that you use in your drive.

First you get this:

Then you copy & paste to get this:
TSSTcorp CD/DVDW SH-S162L TS06 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2,295,104
Free Space: 4,700,372,992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x

Physical Format Information (ADIP):
Disc ID: YUDEN000-T02-00
Book Type: DVD+R

[midnightangel]

here is a different error log i get now.


I 22:48:19 ImgBurn Version 2.1.0.0 started!
I 22:48:19 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 22:48:19 Initialising SPTI...
I 22:48:19 Searching for SCSI / ATAPI devices...
I 22:48:19 Found 1 DVD-ROM and 1 DVD+RW!
I 22:48:19 Operation Started!
I 22:48:19 Source File: C:\CHRONICLES_OF_RIDDICK.ISO
I 22:48:19 Source File Sectors: 2,285,848 (MODE1/2048)
I 22:48:19 Source File Size: 4,681,416,704 bytes
I 22:48:19 Source File Volume Identifier: CHRONICLES_OF_RIDDICK
I 22:48:19 Source File Implementation Identifier: DVD Shrink
I 22:48:19 Source File File System(s): ISO9660, UDF (1.02)
I 22:48:19 Destination Device: [1:1:0] DVD+R/RW DX082D 14SB (E (ATA)
I 22:48:19 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 22:48:19 Destination Media Sectors: 2,295,104
I 22:48:19 Write Mode: DVD
I 22:48:19 Write Type: DAO
I 22:48:19 Write Speed: 6x
I 22:48:19 Link Size: Auto
I 22:48:20 Test Mode: No
I 22:48:20 BURN-Proof: Enabled
I 22:48:20 Filling Buffer...
I 22:48:21 Writing LeadIn...
I 22:48:30 Writing Image...
I 23:00:22 Synchronising Cache...
I 23:00:24 Closing Track...
I 23:00:29 Finalising Disc...
I 23:00:57 Image MD5: cea39Nero Serial Removed878
I 23:00:58 Operation Successfully Completed! - Duration: 00:12:37
I 23:00:58 Average Write Rate: 6,420 KB/s (4.6x) - Maximum Write Rate: 7,611 KB/s (5.5x)
I 23:00:58 Cycling Tray before Verify...
I 23:01:15 Device Ready!
I 23:01:15 Operation Started!
I 23:01:15 Source Device: [1:1:0] DVD+R/RW DX082D 14SB (E (ATA)
I 23:01:15 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: SONY-D21-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 23:01:15 Image File: C:\CHRONICLES_OF_RIDDICK.ISO
I 23:01:15 Image File Sectors: 2,285,848 (MODE1/2048)
I 23:01:15 Image File Size: 4,681,416,704 bytes
I 23:01:15 Image File Volume Identifier: CHRONICLES_OF_RIDDICK
I 23:01:15 Image File Implementation Identifier: DVD Shrink
I 23:01:15 Image File File System(s): ISO9660, UDF (1.02)
I 23:01:15 Verifying Sectors...
W 08:00:23 Failed to read Sector 0 - Logical Block Address out of Range
W 08:00:24 Failed to read Sector 1 - Logical Block Address out of Range
W 08:00:36 Failed to read Sector 2 - Logical Block Address out of Range
W 08:00:37 Failed to read Sector 3 - Logical Block Address out of Range
W 08:00:37 Failed to read Sector 4 - Logical Block Address out of Range
E 08:00:40 Failed to read Sector 5 - Logical Block Address out of Range
E 08:00:40 Failed to Verify Sectors!
E 08:00:42 Operation Failed! - Duration: 08:59:25
I 08:00:42 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x)

[midnightangel]

hey soup, sorry to sound like a prood, but I still ain't following this copy and paste. When I look at the attachment, it seems identical to what is posted. What do I copy and where do I paste it to?

[Chewy]

that burner is pretty old, has it seen a lot of use? The media is ok but
I am surprised that the firmware even burned it close to 6x, retry at 4x or even 2.4. There apears to be a slightly newer firmware(still 2years old)

http://forum.rpc1.org/dl_firmware.php?download_id=1746

150B might help, if you do flash use safe mode and make sure the drive is empty

[soup]

If you look at the pic, the info that was recquired at the time was in the right hand window. You don't need to now but you would copy that info & paste it in a reply post.

[midnightangel]

Got you now. LOL. Anyway, I updated my firmware and my drive would get to about 86% and freeze up the computer. I couldn't copy and paste the error report. Couldn't even open the internet.

My burner is quite old and has definately seen a lot of use. When I had DVDxCopy running on here I probably burned 200 or 250 movies with it. What about a new LiteOn lite scribe (dual layer/dual format) burner? Any suggestions on that one?

[midnightangel]

Oh yeah. One other thing. This is the process I use and maybe I'm doing something wrong.

DVDfabDecrypter/DVDShrink set to ISO using Decrypter w/ImgBurn

[soup]

RipIt4Me or DvdFab Decrypter to rip to your hard drive / Dvd Shrink to make it fit on a single layer blank & create an ISO / burn ISO with ImgBurn.

[midnightangel]

So, then I take it I am using the correct combo of programs? At least I'm doing that part right. LOL. Anyway, I'm picking up a new burner, but what do you think of the LiteOn that I mentioned? Think it's a good burner?