Help! IMGBurn I/O Error - Invalid Address for Write

**blutach** · 28 Dec 2006, 09:34 AM

Try lowering the speed again to 2.4X on USB drives. Those disks are reasonably new and the firmware is quite old (Feb 06) and no further update is available. You might have better luck with MCC003s.

Regards

**Chewy** · 28 Dec 2006, 10:43 AM

could try the drive on another computer and verify if it works

**Keldo** · 28 Dec 2006, 03:18 PM

Thanks for the quick replies. No luck on the 2.4x speed, I get the same error as before. I will try it on a different computer and if that doesn't work, I'll try and grab the older media version. I'll let you know.

**12345** · 29 Dec 2006, 03:00 PM

I am having the same problem, one day NERO stopped working in conjunction with shrink, so I started using decrypter and or imgburn. It worked fine for about 2 weeks, now that same 0X0C 0X80 error keeps popping up now nothing works, sony, TY, verbatim, the media doesn even matter. its driving me up a wall. it used to work on command, I felt like the DVD master, now, no such luck. please help

**Chewy** · 29 Dec 2006, 03:16 PM

a bus trace program might show issues

Cdex Problem! - Digital Video Forums

http://forum.digital-digest.com/showpost.php?p=423201&postcount=20

Talk about everything else not included in other sub-forums

**12345** · 30 Dec 2006, 03:45 PM

more problems, I tried to update my firmware, and I wrecked my junk.

now nero and dvddecrypter and img burn do not recognize blank media. total bummer. I reformatted my gateway hardrive, resinstalled all the software (windows, office, etc) lost my bookmarks, but saved my documents, still no dice on reading blank media. any suggestions, or should I just quit and move under a bridge like a common troll.

**Keldo** · 6 Jan 2007, 05:21 AM

Well, I'm sorry to hear that, 12345. Fortunately for me, it seems that different Verbatim media worked at 2.4x at least once. I will hold out judgement until a few succesful burns are complete, but it appears to be in good shape. Now, to just find some LightScribe DVDs that will work again so I can make those pretty pictures on the front...

Thanks again for everyone's help, and good luck, 12345.

**Tauro202** · 30 Oct 2010, 06:41 PM

As many others have, I have had many problems with burning my Xbox360 games. I did all my research and pretty much knew exactly what i was doing. It was just putting it into motion now. I had TDK ritek disks, set burn speed to 2.4x and hit burn. First problem: Write speed mismatch, the write speed was reset to 4x. Still havent been able to fix this but no need to. 2 games burned fine, but the next 8 discs...... WASTED!! I/O write error!! I tried Clone DVD...... same problem. I tried everything, so much frustration. I noticed when using Clone DVD it did write at my specified 2.4x, but also noticed, it didnt write as much information on the disk before having the write media error. So just for curiosity i went back to ImageBurn and set burn speed to 6x...... A COMPLETE SUCCESS!!! I know there is much contraversy about burning ur games at higher end speeds and this may be true at speeds faster than 6x, but i have burned many games since at 6x and even finished some of them and have had no problems what so ever. Later my usual shop only had verbatim disks, so i had to fork out the extra cash in desperation to play my eagerly awaited game ready for action. On the cover it specifically says 2.4x DVD+R DL. Got me thinking...... so i tried burning a verbatim disk at a slower speed. Also..... SUCCESS!!! I have searched everywhere on the net and could not find this information anywhere. So many people are having this problem and everyone tells you not to burn faster than 2.4x. Its drilled into ur head that the games will have problems and freeze up on you if you burn at faster speeds so no one obviously would try it. Like i said I tried EVERYTHING with no success and this works flawlessly for me everytime. I hope this works for everyone who have tried everything but have not tried this.........
GOOD LUCK!!

Help! IMGBurn I/O Error - Invalid Address for Write

Help! IMGBurn I/O Error - Invalid Address for Write

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment