Tweet
Hello, I am no exactly new here, I have been reading the posts here for a while now, but then I finally had a reason to post, so here it is.
Story: My house was broken into about a week ago and the only things missing were my ps3 games. So, i changed all the locks and I cant get any fancy security system where I live, but I tried my best. Thankfully my xbox 360 games were in a different room, in a closed cupboard. But, I know that I can back up my games, I just never had a reason to, but now I do. Hence, why I am voicing out now.
Situation: Alright, my xbox has been correctly been flashed, as tested with a friend who has done the same thing. My issue is, burning the games. I have them successfully saved as ISO (with DVD file too) and I have both CloneCD AND ImgBurn.
Problem: I have tried both, CloneCD just froze my computer, locked up all my applications, and forced me to restart.
ImgBurn has been a little more helpful, and provided me with an error window: http://img520.imageshack.us/my.php?i...0430502nb3.jpg
And the log shows this: W 18:35:33 Potential 'ReadBufferCapacity' Deferred Error - The request could not be performed because of an I/O device error.
W 18:35:33 Failed to Write Sectors 32 - 63 - Reason: Power On, Reset, or Bus Device Reset Occurred
The info on my DVD-Drive:
I think I provided everything short of a DxDiag log, but I can't imagine that being needed. Please, I respectfully ask for any tips or help that may be given, I am decently computer literate but no genius at it or anything, so please explain if it is complicated. I thank you in advance, and I apologize if this is there wrong place for this.
Story: My house was broken into about a week ago and the only things missing were my ps3 games. So, i changed all the locks and I cant get any fancy security system where I live, but I tried my best. Thankfully my xbox 360 games were in a different room, in a closed cupboard. But, I know that I can back up my games, I just never had a reason to, but now I do. Hence, why I am voicing out now.
Situation: Alright, my xbox has been correctly been flashed, as tested with a friend who has done the same thing. My issue is, burning the games. I have them successfully saved as ISO (with DVD file too) and I have both CloneCD AND ImgBurn.
Problem: I have tried both, CloneCD just froze my computer, locked up all my applications, and forced me to restart.
ImgBurn has been a little more helpful, and provided me with an error window: http://img520.imageshack.us/my.php?i...0430502nb3.jpg
And the log shows this: W 18:35:33 Potential 'ReadBufferCapacity' Deferred Error - The request could not be performed because of an I/O device error.
W 18:35:33 Failed to Write Sectors 32 - 63 - Reason: Power On, Reset, or Bus Device Reset Occurred
The info on my DVD-Drive:
HL-DT-ST DVDRAM GH20LS15 JL00 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Incomplete
Erasable: No
Free Sectors: 3,827,520
Free Space: 7,838,760,960 bytes
Free Time: 850:35:45 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,913,760
Changeable: No
Disc Control Blocks Information:
HL-DT-ST 0LS15
Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,110,367
Discs being used: Verbatim DVD+R DL [8.5gb][2.4x Speed][240min] Current Profile: DVD+R DL
Disc Information:
Status: Incomplete
Erasable: No
Free Sectors: 3,827,520
Free Space: 7,838,760,960 bytes
Free Time: 850:35:45 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,913,760
Changeable: No
Disc Control Blocks Information:
HL-DT-ST 0LS15
Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,110,367
I think I provided everything short of a DxDiag log, but I can't imagine that being needed. Please, I respectfully ask for any tips or help that may be given, I am decently computer literate but no genius at it or anything, so please explain if it is complicated. I thank you in advance, and I apologize if this is there wrong place for this.
Comment