Tweet
Hey guys! Firstly, my problem contains several different catagories, and it didn't fit into any one forum, so that's why I'm posting here. Mods, feel free to move this if you think it fits better somewhere else.
Ok, here's my sad story: I've been making Xbox 360 backups for a long time and I thought that I was fairly familiar with the process. I had a Samsung DVD burner that I was using and it burned out. So I replaced it with a Liteon DVD burner. Everything worked fine. Then I decided that it was time to replace my motherboard and processor. Now I get errors when I try to burn Xbox 360 backups with Imgburn and CloneCD. Here's what I'm working with:
Liteon DVD burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Master)
I also have a new HP multi media burner that gives me the exact same error:
HP DVD Burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Slave)
Here's the log that I get from Imgburn when I try to make a backup:
I 14:00:09 ImgBurn Version 2.4.2.0 started!
I 14:00:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 14:00:09 Total Physical Memory: 2,619,628 KB - Available: 2,225,236 KB
I 14:00:09 Initialising SPTI...
I 14:00:09 Searching for SCSI / ATAPI devices...
I 14:00:09 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 14:00:22 Operation Started!
I 14:00:22 Source File: C:\Documents and Settings\Josh\Desktop\Xbox 360 Games\Nascar 09\Nascar09.dvd
I 14:00:22 Source File Sectors: 3,825,924 (MODE1/2048)
I 14:00:22 Source File Size: 7,835,492,352 bytes
I 14:00:22 Source File Volume Identifier: XGD2DVD_NTSC
I 14:00:22 Source File Volume Set Identifier: 34672923
I 14:00:22 Source File Implementation Identifier: Sonic Scenarist 3.1
I 14:00:22 Source File File System(s): ISO9660, UDF (1.02)
I 14:00:22 Destination Device: [4:1:0] HP DVD Writer 1140i YH25 (E
(RAID)
I 14:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:00:22 Destination Media Sectors: 4,173,824
I 14:00:22 Write Mode: DVD
I 14:00:22 Write Type: DAO
I 14:00:22 Write Speed: 2.4x
I 14:00:22 Link Size: Auto
I 14:00:22 Test Mode: No
I 14:00:22 OPC: No
I 14:00:22 BURN-Proof: Enabled
I 14:00:22 User Specified L0 Data Zone Capacity: 1,913,760
W 14:00:53 Failed to set L0 Data Zone Capacity!
W 14:00:53 Reason: Power On, Reset, or Bus Device Reset Occurred
I 14:00:54 Filling Buffer... (40 MB)
I 14:00:54 Writing LeadIn...
W 14:00:57 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 14:00:57 Retrying (1 of 20)...
I 14:00:57 Abort Request Acknowledged
I'm not sure what else to try. The HP writer is brand new, so it's not the burner. I get the exact same error with both burners. I'm using Verbatim 2.4x DL DVD's, so that's not the problem. I changed the Ribbon Cable, so that's not the problem. So I'm thinking that it has to be programming based. Someone in another posing suggested that it might have something to do with the IDE controller, but I don't know anything about that. So maybe it's the drivers, maybe it's the firmware. I don't really know. I wouldn't think that it's the firmware because the drive worked prior to the new motherboard.
Oh, and just a quick note: Both drives burn Wii Backups with no problem (so single layer disks still burn fine). I don't know what I need to tweak. Please Help!!!
Ok, here's my sad story: I've been making Xbox 360 backups for a long time and I thought that I was fairly familiar with the process. I had a Samsung DVD burner that I was using and it burned out. So I replaced it with a Liteon DVD burner. Everything worked fine. Then I decided that it was time to replace my motherboard and processor. Now I get errors when I try to burn Xbox 360 backups with Imgburn and CloneCD. Here's what I'm working with:
Liteon DVD burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Master)
I also have a new HP multi media burner that gives me the exact same error:
HP DVD Burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Slave)
Here's the log that I get from Imgburn when I try to make a backup:
I 14:00:09 ImgBurn Version 2.4.2.0 started!
I 14:00:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 14:00:09 Total Physical Memory: 2,619,628 KB - Available: 2,225,236 KB
I 14:00:09 Initialising SPTI...
I 14:00:09 Searching for SCSI / ATAPI devices...
I 14:00:09 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 14:00:22 Operation Started!
I 14:00:22 Source File: C:\Documents and Settings\Josh\Desktop\Xbox 360 Games\Nascar 09\Nascar09.dvd
I 14:00:22 Source File Sectors: 3,825,924 (MODE1/2048)
I 14:00:22 Source File Size: 7,835,492,352 bytes
I 14:00:22 Source File Volume Identifier: XGD2DVD_NTSC
I 14:00:22 Source File Volume Set Identifier: 34672923
I 14:00:22 Source File Implementation Identifier: Sonic Scenarist 3.1
I 14:00:22 Source File File System(s): ISO9660, UDF (1.02)
I 14:00:22 Destination Device: [4:1:0] HP DVD Writer 1140i YH25 (E
(RAID) I 14:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:00:22 Destination Media Sectors: 4,173,824
I 14:00:22 Write Mode: DVD
I 14:00:22 Write Type: DAO
I 14:00:22 Write Speed: 2.4x
I 14:00:22 Link Size: Auto
I 14:00:22 Test Mode: No
I 14:00:22 OPC: No
I 14:00:22 BURN-Proof: Enabled
I 14:00:22 User Specified L0 Data Zone Capacity: 1,913,760
W 14:00:53 Failed to set L0 Data Zone Capacity!
W 14:00:53 Reason: Power On, Reset, or Bus Device Reset Occurred
I 14:00:54 Filling Buffer... (40 MB)
I 14:00:54 Writing LeadIn...
W 14:00:57 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 14:00:57 Retrying (1 of 20)...
I 14:00:57 Abort Request Acknowledged
I'm not sure what else to try. The HP writer is brand new, so it's not the burner. I get the exact same error with both burners. I'm using Verbatim 2.4x DL DVD's, so that's not the problem. I changed the Ribbon Cable, so that's not the problem. So I'm thinking that it has to be programming based. Someone in another posing suggested that it might have something to do with the IDE controller, but I don't know anything about that. So maybe it's the drivers, maybe it's the firmware. I don't really know. I wouldn't think that it's the firmware because the drive worked prior to the new motherboard.
Oh, and just a quick note: Both drives burn Wii Backups with no problem (so single layer disks still burn fine). I don't know what I need to tweak. Please Help!!!