hi first of all i want to say that my drive is a _NEC DVD_RW ND-1300A
it copies dvds and cds fine but lately when i try to make a cd from files using either pinnacle or windows media player 8 they come up with a message about invalid parameters or something. wmp comes up with a message saying there was an invalid parameter assigned. please help this is driving me crazy
here is some m ore info
Error Writing The Lead-In
Extended information:#1Device:_nedDVD_RW ND-1300A (D
Medium Error: Power Calibration Area Error
70 00 03 00 00 00 00 0A 00 00 00 00 73 03
2A 00 FF FF CF 13 00 00 55 00
HERE IS THE LOG
Versions:
Operating System: Windows XP 5.01 (Build 2600: Service Pack 1)
InstantCopy: 7.0.3.142 (20/05/2003 11:15:56)
InstantDisc: 7.0.1.061 (17/04/2003 12:11:44)
CD-R Drivers: 6.4.3.113 (26/05/2003 11:32:54)
ISO/UDF Creator: 1.0.2.035 (19/02/2003 14:09:54)
ASAPI Interface: 5.0.0.002 (27/04/2000 12:31:1
Write speed: High
Write method: Disc at Once
Closing method: Automatic
Simulation: Simulation and writing after confirmation
[ ] Write to hard disk first
[ ] Verify destination media after write
Destination Device:
_nec DVD_RW ND-1300A (D 1.07 MMC-Driver
Disc Contents:
Nr Length Pre Post Sectormode
1 14,114 150 0 Audio
2 14,009 150 0 Audio
3 14,614 150 0 Audio
4 16,636 150 0 Audio
5 14,487 150 0 Audio
6 21,761 150 0 Audio
7 18,209 150 0 Audio
8 13,909 150 0 Audio
9 15,729 150 0 Audio
10 14,214 150 0 Audio
11 15,551 150 0 Audio
12 9,916 150 0 Audio
13 23,716 150 0 Audio
14 22,306 150 0 Audio
15 13,410 150 0 Audio
16 13,411 150 0 Audio
Project contents:
Reading destination disc information ...
Creating table of contents...
Writing track 1 of 16 track(s)
Starting track 1...
Finishing track 1...
Writing track 2 of 16 track(s)
Starting track 2...
Finishing track 2...
Writing track 3 of 16 track(s)
Starting track 3...
Finishing track 3...
Writing track 4 of 16 track(s)
Starting track 4...
Finishing track 4...
Writing track 5 of 16 track(s)
Starting track 5...
Finishing track 5...
Writing track 6 of 16 track(s)
Starting track 6...
Finishing track 6...
Writing track 7 of 16 track(s)
Starting track 7...
Finishing track 7...
Writing track 8 of 16 track(s)
Starting track 8...
Finishing track 8...
Writing track 9 of 16 track(s)
Starting track 9...
Finishing track 9...
Writing track 10 of 16 track(s)
Starting track 10...
Finishing track 10...
Writing track 11 of 16 track(s)
Starting track 11...
Finishing track 11...
Writing track 12 of 16 track(s)
Starting track 12...
Finishing track 12...
Writing track 13 of 16 track(s)
Starting track 13...
Finishing track 13...
Writing track 14 of 16 track(s)
Starting track 14...
Finishing track 14...
Writing track 15 of 16 track(s)
Starting track 15...
Finishing track 15...
Writing track 16 of 16 track(s)
Starting track 16...
Finishing track 16...
Finishing disc...
Resetting destination device...
Reading destination disc information ...
Creating table of contents...
Resetting destination device...
---------------------------------------------------------
Error writing the lead in.
---------------------------------------------------------
---------------------------------------------------------
Extended information:#1Device: _nec DVD_RW ND-1300A (D
MEDIUM ERROR: POWER CALIBRATION AREA ERROR
70 00 03 00 00 00 00 0A 00 00 00 00 73 03
2A 00 FF FF CF 13 00 00 55 00
---------------------------------------------------------
some people have suggested to look fotr driver and software updates but ive heard you shouldn'y download driver updates if the dvdrw came in a pc package which mine did
it copies dvds and cds fine but lately when i try to make a cd from files using either pinnacle or windows media player 8 they come up with a message about invalid parameters or something. wmp comes up with a message saying there was an invalid parameter assigned. please help this is driving me crazy
here is some m ore info
Error Writing The Lead-In
Extended information:#1Device:_nedDVD_RW ND-1300A (D
Medium Error: Power Calibration Area Error
70 00 03 00 00 00 00 0A 00 00 00 00 73 03
2A 00 FF FF CF 13 00 00 55 00
HERE IS THE LOG
Versions:
Operating System: Windows XP 5.01 (Build 2600: Service Pack 1)
InstantCopy: 7.0.3.142 (20/05/2003 11:15:56)
InstantDisc: 7.0.1.061 (17/04/2003 12:11:44)
CD-R Drivers: 6.4.3.113 (26/05/2003 11:32:54)
ISO/UDF Creator: 1.0.2.035 (19/02/2003 14:09:54)
ASAPI Interface: 5.0.0.002 (27/04/2000 12:31:1
Write speed: High
Write method: Disc at Once
Closing method: Automatic
Simulation: Simulation and writing after confirmation
[ ] Write to hard disk first
[ ] Verify destination media after write
Destination Device:
_nec DVD_RW ND-1300A (D 1.07 MMC-Driver
Disc Contents:
Nr Length Pre Post Sectormode
1 14,114 150 0 Audio
2 14,009 150 0 Audio
3 14,614 150 0 Audio
4 16,636 150 0 Audio
5 14,487 150 0 Audio
6 21,761 150 0 Audio
7 18,209 150 0 Audio
8 13,909 150 0 Audio
9 15,729 150 0 Audio
10 14,214 150 0 Audio
11 15,551 150 0 Audio
12 9,916 150 0 Audio
13 23,716 150 0 Audio
14 22,306 150 0 Audio
15 13,410 150 0 Audio
16 13,411 150 0 Audio
Project contents:
Reading destination disc information ...
Creating table of contents...
Writing track 1 of 16 track(s)
Starting track 1...
Finishing track 1...
Writing track 2 of 16 track(s)
Starting track 2...
Finishing track 2...
Writing track 3 of 16 track(s)
Starting track 3...
Finishing track 3...
Writing track 4 of 16 track(s)
Starting track 4...
Finishing track 4...
Writing track 5 of 16 track(s)
Starting track 5...
Finishing track 5...
Writing track 6 of 16 track(s)
Starting track 6...
Finishing track 6...
Writing track 7 of 16 track(s)
Starting track 7...
Finishing track 7...
Writing track 8 of 16 track(s)
Starting track 8...
Finishing track 8...
Writing track 9 of 16 track(s)
Starting track 9...
Finishing track 9...
Writing track 10 of 16 track(s)
Starting track 10...
Finishing track 10...
Writing track 11 of 16 track(s)
Starting track 11...
Finishing track 11...
Writing track 12 of 16 track(s)
Starting track 12...
Finishing track 12...
Writing track 13 of 16 track(s)
Starting track 13...
Finishing track 13...
Writing track 14 of 16 track(s)
Starting track 14...
Finishing track 14...
Writing track 15 of 16 track(s)
Starting track 15...
Finishing track 15...
Writing track 16 of 16 track(s)
Starting track 16...
Finishing track 16...
Finishing disc...
Resetting destination device...
Reading destination disc information ...
Creating table of contents...
Resetting destination device...
---------------------------------------------------------
Error writing the lead in.
---------------------------------------------------------
---------------------------------------------------------
Extended information:#1Device: _nec DVD_RW ND-1300A (D
MEDIUM ERROR: POWER CALIBRATION AREA ERROR
70 00 03 00 00 00 00 0A 00 00 00 00 73 03
2A 00 FF FF CF 13 00 00 55 00
---------------------------------------------------------
some people have suggested to look fotr driver and software updates but ive heard you shouldn'y download driver updates if the dvdrw came in a pc package which mine did
Comment