Nero DVD to DVD copy, errors on "lead out"

[BB_Mike]

First off, this is a backup of a backup.
I have tried to maintain the same media (Memorex DVD+R), but my first "batch" was a 4x speed, while the new batch is a 8x speed.

I have had no problems with the 8x, doing normal backups. However, when I use Nero's DVD-to-DVD copy (I have two drives), I have gotten repeated failures. Well, that's not intirely true. The first two attemps passed wonderfully.

The error experienced is at the bottom of this post.

I have tried using DVD Shrink 3.1 to do it over (to test the source media), and I get the cyclic redundancy error. The source media is fine, and plays in a stand alone player as well as my PC. Do I have to use the original and go through the entire encoding process again? I hope not, as the deep cycle takes a while.

-side note: I ahve noticed (visually) that the time taken to accomplish writing the lead out (at the end of the burning process) takes quite a bit longer with the 8x media. Further more, I notice that on the data side of the media, the inner circle (where this is color and numbers, but is not writeable area) varies in size.

Is it possible that some of the discs in my new batch of media are a tad less than 4.7GB, and causing simple lack of space issues? (this does not explain the "read" failure displayed by Nero during the DVD-to-DVD copy)

EDIT Now the error is primarily a "read error" by NERO. I also tried to select that it read at a set 4x speed, and likewise that is burn at a set 4x speed. no luck yet.


error:
-see attachment please.

[BB_Mike]

error text file

I just noticed that the attachment methods removes all returns...
Here it is in a viewable format:

PART 1

1A23-0006-7130-147B-2313-6750

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\NERO\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM 
Nero version: 6.3.1.20
Recorder:             <DVDRW IDE1008>           Version: 0059 - HA 1 TA 1 - 6.3.1.20
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  COMBO LTC-48161H>Version: KPH9 - HA 1 TA 0 - 6.3.1.20
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD600BB-00CAA1               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON COMBO LTC-48161H         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : DVDRW IDE1008                    atapi Port 1 ID 1  DMA: On 

=== CDRom-Device-Map ===
LITE-ON COMBO LTC-48161H   F:   CDRom0
DVDRW IDE1008              E:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 223MB (228844kB)
Free physical memory: 129MB (132576kB)
Memory in use       : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

28.10.2004
===== Disc-Copy over image - 1st step : Copy to image  ...

1:15:04 PM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
1:15:04 PM	#2 Text 0 File Writer.cpp, Line 124
	Writer  Image Recorder      running
	
1:15:04 PM	#3 Text 0 File DVDCopy.cpp, Line 271
	DVD Track-Information from source disc
	 S01 T01 Con 0x04 Start       0 Len 2286112 (gap       0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
	
1:15:04 PM	#4 Text 0 File DVDCopy.cpp, Line 374
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  2286112 =  2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
1:15:04 PM	#5 Text 0 File Burncd.cpp, Line 3173
	Turn on Disc-at-once, using DVD media
	
1:15:04 PM	#6 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
	Last address to be written:            2286111 (508:01.36, 4465MB)
	
1:15:04 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
1:15:04 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder:  Image Recorder;
	   CD type reading failed
	   ATIP Data: ?
	
1:15:04 PM	#9 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
1:15:04 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [ Image Recorder     ]
	--------------------------------------------------------------
	
1:15:04 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [ Image Recorder     ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200    4682264576, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	    -150 |  lead-in |   0 |   0x00 |  0x41
	    -150 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2286112 | lead-out |   1 |   0x00 |  0x41
	
1:15:04 PM	#12 Phase 120 File dlgbrnst.cpp, Line 1855
	Creating the image for burning
	
1:15:04 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
1:25:22 PM	#14 Text 0 File WriterStatus.cpp, Line 115
	< Image Recorder     > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
	
1:25:22 PM	#15 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
1:25:23 PM	#16 Phase 121 File dlgbrnst.cpp, Line 1855
	Creating Image completed successfully

[BB_Mike]

Part 2:

===== Disc-Copy over image - 2nd step : Burn the image ...

1:25:39 PM	#1 Text 0 File Reader.cpp, Line 126
	Reader running
	
1:25:39 PM	#2 Text 0 File Writer.cpp, Line 124
	Writer DVDRW    IDE1008          running
	
1:25:39 PM	#3 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 387297280
	CUES:
	   0: Ctrl=0x41 Trk=  0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 (     -150)
	   1: Ctrl=0x41 Trk=  1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 (     -150)
	   2: Ctrl=0x41 Trk=  1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 (        0)
	   3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:01.37 (  2286112)
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Documents and Settings\Owner\My Documents\TempImage.nrg>
	
1:25:40 PM	#4 Text 0 File Burncd.cpp, Line 3173
	Turn on Disc-at-once, using DVD media
	
1:25:42 PM	#5 Text 0 File DlgWaitCD.cpp, Line 247
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2286111 (508:01.36, 4465MB)
	
1:25:42 PM	#6 Text 0 File DlgWaitCD.cpp, Line 259
	Write in overburning mode: NO (enabled: CD)
	
1:25:42 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2162
	Recorder: DVDRW IDE1008, Media type: DVD+R
	 Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 3
	
1:25:42 PM	#8 Text 0 File DlgWaitCD.cpp, Line 420
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
1:25:43 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 813
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) provided
	    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos 
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW    IDE1008         ]
	--------------------------------------------------------------
	
1:25:43 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 984
	Prepare recorder [DVDRW    IDE1008         ] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681957376, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2286112 | lead-out |   1 |   0x00 |  0x41
	
1:25:47 PM	#11 Phase 36 File dlgbrnst.cpp, Line 1855
	Burn process started at 8x (11,080 KB/s)
	
1:25:48 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
1:25:48 PM	#13 Text 0 File Cdrdrv.cpp, Line 8128
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R   (10), Part Version: 1
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: CMC.MAG.
	  Media type ID: E01
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	      00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38    ...CMC.MAG.E01.8
	      23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08    #T7..8j..g......
	      01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	
1:25:48 PM	#14 Text 0 File DVDR.cpp, Line 4915
	Drive: DVDRW    IDE1008         
	Book Type request: DVD-ROM
	Changing the book type was finished with error code: 0
	
1:25:48 PM	#15 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 7:11,333 (431333ms) -> OK
	
1:25:48 PM	#16 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
1:37:00 PM	#17 Text 0 File WriterStatus.cpp, Line 115
	<DVDRW    IDE1008         > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
	
1:37:00 PM	#18 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
1:38:01 PM	#19 SCSI -1169 File Cdrdrv.cpp, Line 1188
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x08
	CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x04 0x08 
	
1:42:01 PM	#20 CDR -1175 File Cdrdrv.cpp, Line 1246
	Internal trace
	Resending of command failed after 240000ms
	 CDB Data[hex]: 5B 01 06 00 00 00 00 00 00 00 00 00

	
1:42:01 PM	#21 SCSI -1169 File Cdrdrv.cpp, Line 1247
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x08
	CDB Data:   0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x04 0x08 
	
1:42:15 PM	#22 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
1:42:15 PM	#23 Text 0 File DVDR.cpp, Line 4915
	Drive: DVDRW    IDE1008         
	Book Type request: DVD+R
	Changing the book type was finished with error code: 0
	
1:42:15 PM	#24 CDR -1169 File ThreadedTransferInterface.cpp, Line 1708
	Logical unit not ready, operation in progress
	DVDRW IDE1008\H1 T1
	
1:42:15 PM	#25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
	Could not perform end of Disc-at-once
	
1:42:20 PM	#26 Phase 127 File dlgbrnst.cpp, Line 1855
	Generating DVD high compatibility borders
	
1:47:05 PM	#27 SCSI -1135 File Cdrdrv.cpp, Line 1188
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
1:47:05 PM	#28 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
1:47:05 PM	#29 Phase 129 File dlgbrnst.cpp, Line 1855
	Generating DVD borders completed successfully
	
1:47:05 PM	#30 Text 0 File DVDR.cpp, Line 4915
	Drive: DVDRW    IDE1008         
	Book Type request: DVD+R
	Changing the book type was finished with error code: 0
	
1:47:05 PM	#31 Text 0 File dlgbrnst.cpp, Line 1713
	Set remaining time: 0:00,000 (0ms) -> OK
	
1:47:05 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1855
	Burn process failed at 8x (11,080 KB/s)
	
)

[BB_Mike]

Update:

One way to accomplish the task is to first place the source files onto the PC hard disk, and then use the NERO "Create DVD" feature. Which takes about as long as DVD shrink without having to do Deep Scan.

I will continue to do it this way, to prevent from having more coasters... which make for nice Christmass ornaments as well.

[cynthia]

Is it a BTC DRW 1008IM burner - if so there is a later firmware.

http://forum.rpc1.org/dl_firmware.php?download_id=1727

Could also try to update your Nero with latest updates.

[BB_Mike]

I have an ever-growing fear up "updates". They should asign a phobia word to it.

My burner is sold by Micro Advantage. The handle assigned to it by any burner application is: IDE1008

Things are going wellenough right now. Putting the files back on the hard disk is an added 10 minutes per DVD. Pleanty of time to browse the forums.

I've been wanting to find out how to get a composite video feed (1080i high definition) onto a deadicated server. Sort of a home built Digital Video Recorder. I thought DVD-shrink had a lot of coverage. The home Theater concept has MANY an on-line forum.

-Thank Cynthia. The name sounds familiar... If your the girl from Sweden who helped me out here once before.